• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.31-37
• /
• 2009

This paper presents an efficient frame synchronization strategy with the identification of modulation type for Digital Video Broadcasting-Satellite second generation (DVB-S2). To detect the Start Of Frame (SOF) and identify a modulation mode at low SNR, we propose a new correlator structure and a low complexity Automatic Gain Controller (AGC). The proposed frame synchronization architecture can reduce about 93% multipliers and 89% adders compared with the direct implementation of the Differential - Generalized Post Detection Integration (D-GPDI) algorithm which is very complex and the proposed a low complexity AGC consists of only 5 multipliers and 3 adders. The proposed architecture has been thoroughly verified on the Xilinx Virtex II FPGA board.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.4
• /
• pp.85-94
• /
• 2004

Object tracking in a real time image is one of interesting subjects in computer vision and many Practical application fields during the past couple of years. But sometimes existing systems cannot find all objects by recognizing background noise as object. This paper proposes a method of object detection and tracking using adaptive background image in real time. To detect object which is not influenced by illumination and to remove noise in background image, this system generates adaptive background image by real time background image updating. This system detects object using the difference between background image and input image from camera. After setting up Minimum Bounding Rectangle(MBR) using the internal point of detected object, the system tracks object through this MBR In addition, this paper evaluates the test result about performance of proposed method as compared with existing tracking algorithm.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.4
• /
• pp.16-25
• /
• 2000

In this paper, a new disparity detection algorithm which is robust to noise is presented. It detects the disparity of an arbitrary pixel through the iterative competition with neighbor pixels in the range of disparity. A diffusion process to improve stereo matching confidence is used prior to detecting disparity of an arbitrary pixel. It is used for aggregating initial matching measure of the difference map. If the image region for matching is too small, a wrong match might be found due to noise. On the contrary, the region is too big, it results in blurring of object boundaries. Therefore, we decide the image region for matching by using the diffusion process for aggregating matching measure, then detect the true disparity with proposed competition method to the distribution of matching measure. Through the proposed method we get the result of improving matching rate of 6.96% with real stereo imge. From the simulation with the stereo imge, the proposed disparity detection method significantly outperforms the conventional method to matching rate.

• 전자공학회논문지 IE
• /
• v.43 no.2
• /
• pp.87-92
• /
• 2006

Many watermarking methods for protecting the intellectual property right and authentication multimedia data have been proposed in recent years. In image authentication watermarking, watermark is inserted into an image to detect any malicious alteration. So, watermark for authentication and integrity should be erased easily when the image is changed by scaling or cropping etc. We propose in this paper a fragile watermarking algorithm for image integrity verification and tamper localization proofing using special hierarchical structure. In the proposed method, the image to be watermarked is divided into blocks in a multi-level hierarchy and calculating block digital signatures in thus hierarchy. At each level of the hierarchy, a digital signature for each block is calculated using the seven most significant bit(MSBs)-plane values of all pixels within the block. And the resulting signature is incorporated into the LSBs of selected pixels within the block. We provide experimental results to demonstrate the effectiveness of the proposed method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.27-33
• /
• 1984

This paper is an experimental gaudy on the digital hardware implementation of the R2-MF Receiver for 32 channel configurations used in signalling systems between ESS. There are many methods to detect MF signal by DSP techniques, but the requirement for MF detection needs not sharp frequency response, needs only decision about some specific frequencies exist or not at discrete frequency sampling points. The hardware used to implement this algorithm is Am 2900 series "bit-slice microprocessor" chips based on the microprogramming techniques for real time signal processing. And we used the additional Z-80A processor chips for the system control and the decision about which is the right MF signal from the detected MF spectrums. Hence we could enhance the flexibilities of the hardware and the software, this leads that this system is well suits for signalling systems used in TDM ESS.n TDM ESS.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.9
• /
• pp.1035-1042
• /
• 2014

Object recognition is one of the key technologies of the monitoring system for the prevention of various intelligent crimes. The height is one of the physical information of a person, and it may be important information for identification of the person. In this paper, a method which can detect pedestrians from CCTV images and estimate the height of the detected objects, is proposed. In this method, GMM (Gaussian Mixture Model) method was used to separate the moving object from the background and the pedestrian was detected using the conditions such as the width-height ratio and the size of the candidate objects. The proposed method was applied to the CCTV video, and the height of the pedestrian at far-distance, middle- distance, near-distance was estimated for the same person, and the accuracy was evaluated. Experimental results showed that the proposed method can estimate the height of the pedestrian as the accuracy of 97% for the short-range, 98% for the medium-range, and more than 97% for the far-range. The image sizes for the same pedestrian are different as the position of him in the image, it is shown that the proposed algorithm can estimate the height of pedestrian for various position effectively.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.873-882
• /
• 2011

In this paper, we propose an efficient deinterlacing algorithm which interpolates the missing scan lines by weighted summing of the intra and the inter interpolation pixels according to the spatio-temporal variation. In the spatial interpolation, we adopt a new edge based spatial interpolation method which includes edge directional refinement. The conventional edge dependent interpolation algorithms are very sensitive to noise due to the failure of estimating edge direction. In order to exactly detect edge direction, our method first finds the edge directions around the pixel to be interpolated and then refines edge direction of the pixel using weighted maximun frequent filter. Futhermore, we improve the accuracy of motion detection by reducing the possibility of motion detection error using 3 tab median filter. In the final interpolation step, we adopt weighted sum of intra and inter interpolation pixels according to spatio-temporal variation ratio, thereby improving the quality in slow moving area. Simulation results show the efficacy of the proposed method with significant improvement over the previous methods in terms of the objective PSNR quality as well as the subjective image quality.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.6
• /
• pp.850-856
• /
• 2012

Bilateration using two fixed nodes has been used in the field of the real time indoor location system in the narrow space such as building or ship passage. However, as the distance between the fixed nodes increases or any obstructions exist in their zone, it is difficult to detect the location of mobile node(user) due to the degradation of its reception ratio. In order to compensate for these problems, this paper presents, based on IEEE 802.15.4a chirp signal, a new real time indoor location system using stride measurement algorithm which can calculate the location through sensors attached to user. The proposed system consists of an ultrasonic sensor to measure the leg length, a geomagnetic sensor to recognize the user's orientation, and an inertial sensor to obtain the angle between the legs. The experimental results are shown that the proposed system has twice or more accurate output compared with conventional indoor location method in the section which is partially out of communication reachability.

• Atmosphere
• /
• v.22 no.2
• /
• pp.137-147
• /
• 2012

The technique of Brightness Temperature Difference (BTD) between 11 and $12{\mu}m$ separates yellow sand dust from clouds according to the difference in absorptive characteristics between the channels. However, this method causes consistent false alarms in many cases, especially over the desert. In order to reduce these false alarms, we should eliminate the background noise originated from surface. We adopted the Background BTD (BBTD), which stands for surface characteristics on clear sky condition without any dust or cloud. We took an average of brightness temperatures of 11 and $12{\mu}m$ channels during the previous 15 days from a target date and then calculated BTD of averaged ones to obtain decontaminated pixels from dust. After defining the BBTD, we subtracted this index from BTD for the Yellow Sand Index (YSI). In the previous study, this method was already verified using the geostationary satellite, MTSAT. In this study, we applied this to the polar orbiting satellite, MODIS, to detect yellow sand dust over Northeast Asia. Products of yellow sand dust from OMI and MTSAT were used to verify MODIS YSI. The coefficient of determination between MODIS YSI and MTSAT YSI was 0.61, and MODIS YSI and OMI AI was also 0.61. As a result of comparing two products, significantly enhanced signals of dust aerosols were detected by removing the false alarms over the desert. Furthermore, the discontinuity between land and ocean on BTD was removed. This was even effective on the case of fall. This study illustrates that the proposed algorithm can provide the reliable distribution of dust aerosols over the desert even at night.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.1
• /
• pp.68-76
• /
• 2011

Acoustic emission(AE) has emerged as a powerful nondestructive tool to detect any further growth or expansion of preexisting defects or to characterize failure mechanisms. Recently, this kind of technique, that is an in-situ monitoring of inside damages of materials or structures, becomes increasingly popular for monitoring the integrity of large structures like a huge wind turbine blade. Therefore, it is required to find a symptom of damage propagation before catastrophic failure through a continuous monitoring. In this study, a new damage location method has been proposed by using signal mapping algorithm, and an experimental verification is conducted by using small wind turbine blade specimen; a part of 750 kW real blade. The results show that this new signal mapping method has high advantages such as a flexibility for sensor location, improved accuracy, high detectability. The newly proposed method was compared with traditional AE source location method based on arrival time difference.