• International Journal of High-Rise Buildings
• /
• 제4권4호
• /
• pp.271-281
• /
• 2015

This paper introduces detailed three-dimensional numerical analyses on a bored pile foundation for a high-rise building. A static load test was performed on a test pile and a numerical model of a single pile, which was calibrated by comparing it with the test result. The detailed numerical analysis was then conducted on the entire high-rise building foundation. Further study focused on soil pressures under the base slab of a piled raft foundation. Total seven cases with different pile numbers and raft-soil contact conditions were investigated. The design criteria of a foundation, especially settlement requirement were satisfied even for the cases with fewer piles under considerable soil pressure beneath the base slab. The bending moment for the structural design of the base slab was reduced by incorporating soil pressures beneath the base slab along with bored piles. Through the comparative studies, it was found that a more efficient design can be achieved by considering the soil pressure beneath the slab.

• Advances in Energy Research
• /
• 제5권4호
• /
• pp.321-339
• /
• 2017

Energy simulation tools can provide information on the amount of heat transfer through building envelope components, which are considered the main sources of heat loss in buildings. Therefore, it is important to improve the quality of outputs from energy simulation tools and also the process of obtaining them. In this paper, a new Building Energy Performance Assessment Tool (BEPAT) is introduced, which provides users with granular data related to heat transfer through every single wall, window, door, roof, and floor in a building and automatically saves all the related data in text files. This information can be used to identify the envelope components for thermal improvement through energy retrofit or during the design phase. The generated data can also be adopted in the design of energy smart homes, building design tools, and energy retrofit tools as a supplementary dataset. BEPAT is developed by modifying EnergyPlus source code as the energy simulation engine using C++, which only requires Input Data File (IDF) and weather file to perform the energy simulation and automatically provide detailed output. To validate the BEPAT results, a computer model is developed in Revit for use in BEPAT. Validating BEPAT's output with EnergyPlus "advanced output" shows a difference of less than 2% and thus establishing the capability of this tool to facilitate the provision of detailed output on the quantity of heat transfer through walls, fenestrations, roofs, and floors.

• Journal of the Korean housing association
• /
• 제20권2호
• /
• pp.101-108
• /
• 2009

The purpose of this study is to develop basic data for the design of the housing space for unit that factors in the sentiment of the residents by using aesthetic elements and expression method to search for the ways to design housing space for differentiated unit. The results are as follows: First, aesthetic elements in the aesthetic element in the unit housing space for unit can be classified into basic elements and detailed elements. Second, it is possible to classify into distortion, mixing, superposition and juxtaposition methods. Third, use of the 'material' for 'wall' is recommended when designing differentiated housing space by using basic elements. At this time, expression using the method of 'mixing' is effective for inducing differentiation. In particular, elements that can perceive the difference in time are mixed, to add on slight differentiation. Fourth, 'illumination' and 'material' are used when designing differentiated housing space by using detailed elements. Fifth, preference degree of the expression method is manifested differently depending on the selected elements. Lastly, this study conducted a study on the preference level of the aesthetic elements and expression method targeting the experts alone to differentiate the design of the residential space for unit.

• Journal of Korea Multimedia Society
• /
• 제24권9호
• /
• pp.1299-1310
• /
• 2021

Under the background of the rapid development of digital educational games, we have to evidently research the elements of the achievement system of children's DEG (Digital Educational Game), and analyze the relations between the elements and make a profound study on the achievement system and its components on the impact of player's attitude. Compared with the existing research, the research contents and methods are innovative and reliable. The results show that players have a positive attitude towards the DEG achievement system, DEG achievement system has important value and role for educational games. Which is made of five elements: symbol, reward, logic, social interaction, and knowledge. The five elements interact with each other and have a positive impact on players' attitudes. DEG achievement system with five elements will bring players a positive experience. These findings provide a detailed study of the components of the achievement system. With all of these, we can explain the role and relationship of the components, and provide new ideas and empirical evidence for the design and development of children's educational game achievement system. The above findings provide a detailed description of the components of the DEG achievement system, explain the role and value of each component, and the relationships and patterns among the components, it provides a new perspective and empirical evidence for the design and development of the children's system DEG results.

• Tunnel and Underground Space
• /
• 제18권6호
• /
• pp.393-407
• /
• 2008

To protection of fire accident and to minimize danger of spreading the disaster. in railway tunnel, MCT (the Ministry of Construction and Transportation) published "Rules about the Safety Standard of Railroad (2005.10.27)" and "The Detailed Safety Standard of Railroad (2006.9.22)". QRA(Quantitative Risk Analysis) results are applied to establish the fire protection facilities in railway tunnel so that institute the reasonable application about the fire safety facilities However, it is difficult to perform the fire safety design due to lack of the detailed standards about event scenario, fire intensity, incidence rate of accidents etc. Therefore, This paper introduces the practical method about detailed standards of QRA.

• Journal of the Society of Naval Architects of Korea
• /
• 제47권4호
• /
• pp.606-612
• /
• 2010

This study took advantage of NC processing technique in order to recreate design in development process of leisure boat based on the Korean boats and ships. CNC milling is an area which is concerned in automation process of boat production and needs sophisticated software, equipment and professionals to pilot it. The progress of manufacture begins when the surface model creation and simulation being done using CAD/CAM software. In this process, the needs such as 3D design, NC processing data, plug lamination and partition processing appear as detailed steps. The study completed these detailed steps and also the application example has been studied with presenting engineering potentialities.

• Journal of the Korean Institute of Telematics and Electronics
• /
• 제27권4호
• /
• pp.628-635
• /
• 1990

This paper describes a new gate array layout system, HAN-LACAD-G(HANyang LAyout CAD system for Gate array). HAN-LACAD-G is composed of placer, global router, detailed router, and output processor. In placement design, initial placement is performed by repetitive clustering and min-cut partitioning followed by placement improvement using the concept of pairwise interchange. In global routing phase, pins are assigned in each channel considering the routing congestion estimation and overflows in feedthroughs are restricted. For the detailed routing, we use layer and three layer channel routing techniques. Layout results are displayed graphically and modified interactively by the user using the layout editor.

• Journal of Computational Design and Engineering
• /
• 제2권2호
• /
• pp.73-78
• /
• 2015

In this paper, we propose a new approach to providing interactive and collaborative lens among multi-users for supporting level-of-detailed views using smartphones in a public display. In order to provide smartphone-based lens capability, the locations of smartphones are effectively detected and tracked using Kinect, which provides RGB data and depth data (RGB-D). In particular, human skeleton information is extracted from the Kinect 3D depth data to calculate the smartphone location more efficiently and correctly with respect to the public display and to support head tracking for easy target selection and adaptive view generation. The suggested interactive and collaborative lens using smartphones not only can explore local spaces of the shared display but also can provide various kinds of activities such as LOD viewing and collaborative interaction. Implementation results are given to show the advantage and effectiveness of the proposed approach.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1732-1735
• /
• 2002

A $\kappa$-side switch box with W terminals on each side is said to be hyper universal, denoted by ($\kappa$, W)-HUSB, if it is routable for any global .outing with density at most W. In [5], we have proposed a switch box design strategy and designed a near optimum (4, W)-HUSB F(W) with 6.W switches. In this paper, we design, analyze and implement an efficient detailed routing algorithm for the S-box F(W). This router. can accommodate all routing requirement topologies.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.197-202
• /
• 2005

On December 2001, Yongin Light Rapid Transit was started with the Notification of Basic Plan for Private Infrastructure Investment Project and promoted as BTO configuration to effectually cope with the rapid increase of traffic demand in Yongin City and establish pleasant and green urban traffic system to connect with New Boondang Line to diversity traffic demand around roads. On May 27th, 2005, it was applied authorization of detailed plan and the .First Light Rapid Transit in Korea shall be started construction on Nov, 2005, and completion on May. 2009. This Thesis will introduce the Detailed Design for Yongin Light Rapid Transit.