• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 추계학술발표회
• /
• pp.277-279
• /
• 2002

In late of the 1980's, dramatic increase in water use caused over-exploitation of groundwater and deterioration of water quality in urban areas. To monitor quantity of groundwater resources and their qualities, local groundwater monitoring networks were established. Groundwater resources in urban areas are affected by various human activities including underground building construction (subway), pumping for water use, and pavements. Detailed analysis of the monitored groundwater data would provide some good implications for optimal and efficient management for groundwater resources in the urban area.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.473-475
• /
• 2001

We report the state of the development of monitoring system for 72.5kV GIS. In the first, the usual outline of the monitoring and diagnostic system for GIS was mentioned, and the detailed specifications and state of development were also described. Especially, we present items of monitoring for GIS such as the operating counter of CB, the leakage condition of $SF_6$ gas, the surge counter of LA and the leakage current of LA.

• 에너지공학
• /
• 제23권3호
• /
• pp.58-65
• /
• 2014

에너지효율등급제 사후관리의 국외 시행사례에 대해서 분석해 보았다. 이를 바탕으로 국내 사후관리제에 대한 시사점을 제시하였다. 첫째, 사후관리 위반정도가 심한 제품의 모델수 확대 및 반복적 위반업체의 해당모델에 대해 지속적으로 포함하고, 판매시장에서 구입하는 방식으로 적용되어야 할 것이다. 둘째, 사후관리 대상모델에 대한 점검결과를 반영하여 위반 발생빈도에 따라 제품별 사후관리 점검방식의 개선을 강구하는 것이 바람직하다. 셋째, 사후관리 점검결과 부적합율 또는 반복적 위반사례가 지속되는 경우 수시점검의 실시가 필요하다. 끝으로, 사후관리 점검결과에 대한 현재 관보 게재 및 보도자료 공개에서 사후관리 전과정에 대한 상세보고서까지 관계 유관기관에 공고 및 인터넷 공개로 확대하는 것이 요청된다.

• 지질공학
• /
• 제26권4호
• /
• pp.473-484
• /
• 2016

본 연구는 환경유해시설인 광물찌꺼기 적치장의 효과적 유지관리를 위한 모니터링 방안을 수립하기 위해 수행하였다. 광물찌꺼기 적치장 유지관리를 위한 모니터링은 세분된 점검항목 및 평가항목의 선정을 통해 상세한 조사가 필요하며, 조사결과를 효과적으로 활용하기 위하여 불량정도 및 그 진행성 여부에 대한 평가가 필요하다. 따라서 모니터링 항목을 옹벽구조물(콘크리트 옹벽, 석축, 돌망태) 및 일반시설물(차수층, 복토층, 사면, 광물찌꺼기, 우수배제시설, 침출수, 식생)로 점검항목을 세분하고, 각 항목별 모니터링 결과에 대한 상태평가를 수행하여 등급 및 점수화를 통해 체계적인 유지관리가 될 수 있도록 모니터링 개선안을 제안하였다. 개선안에 따른 현장 적용성 평가 결과, 기존 모니터링에 비해 최대 16건(우수배제시설)의 하자 발생 건수가 추가로 확인되는 등 기존 모니터링에 비해 세부적인 평가가 가능한 것으로 확인되었으며, 등급에 따른 광물찌꺼기 적치장별 종합점수는 금장광산이 89.3점으로 가장 양호하고 거풍광산이 22.2점, 화천광산이 27.8점으로 가장 불량한 것으로 확인되었다. 이와 같이 개선안을 적용할 경우, 보다 상세한 모니터링을 수행할 수 있고 각각의 항목에 대한 정량적인 평가가 가능하다. 이러한 정량적 평가는 향후 광물찌꺼기 적치장의 보수 우선순위를 결정하고 중점관리항목 선정, 유지보수 계획수립에 활용될 수 있을 것으로 판단된다.

• 한국산업보건학회지
• /
• 제31권2호
• /
• pp.147-155
• /
• 2021

Objective: The purpose of this study was to find ways for strengthening occupational health services through monitoring exposure to health hazards. Methods: About 70,000 workplaces that have conducted the work environment measurement(WEM) over the last three years(2017~2019) were classified according to the Korean Standard Industry Classification(KSIC), and the current status of WEM by industry was analyzed. The authors considered ways to monitor exposure to health hazards in order to strengthen occupational health services and protect workers' health. Results: Based on the KSIC, 934 of the 1,196 total sub-classified industries have conducted WEM in at least one workplace over the last three year(2017~2019). In the case of manufacturing, out of a total of 477 sub-classified industries, 474 have conducted WEM at more than one workplace. However, in some industries, WEM was not conducted or the implementation rate was low, so it was necessary to examine whether WEM should be expanded based on a detailed analysis of the WEM database. To this end, it is necessary to form an exposure monitoring committee in which various experts from different fields can participate. The committee needs to discuss the overall matters necessary for selecting industries that require detailed investigation or research, review the results, and prepare a final recommendation. Conclusion: In conclusion, the government needs to come up with a plan to strengthen occupational health services through surveys and research on the current status of WEM and work environment management models by industry.

• 국제초고층학회논문집
• /
• 제4권1호
• /
• pp.39-44
• /
• 2015

This paper presents the structural health monitoring (SHM) of Shanghai Tower. In order to provide useful information for safety evaluation and regular maintenance under construction and in-service condition, a comprehensive structural health monitoring (SHM) system is installed in Shanghai Tower, which is composed of a main monitoring station and eleven substations. Structural responses at different construction stages are measured using this SHM system and presented in this study. Meanwhile, a detailed finite element model (FEM) is created and comparison of results between SHM and FEM is carried out. Results indicate that the time-dependent property of concrete creep is of great importance to structural response and the measured data can be used in FEM updating to obtain more accurate FEM models at different construction stages. Therefore, installation of structural health monitoring system in super-tall buildings could be considered as an effective way to assure structural safety during the construction process.

• 한국태양에너지학회 논문집
• /
• 제29권6호
• /
• pp.69-74
• /
• 2009

Monitoring system is an absolutely-required system for assessing a performance and fatigue load of the wind turbine in an on-shore wind energy experimental research complex. It was implemented for the purpose of monitoring the wind information measured from a meteorological tower at the monitoring house, and of utilizing the measured data(fatigue data and electric analyzing data of wind turbine)for the performance assessment, by using the LabVIEW program. Then, by adding the performance assessment-related data acquired from the wind turbine during the performance assessment and the data recorder for synchronizing the data of meteorological tower, the system(BusDAQ) was implemented. Because it transmitted the data by converting the output 'RS-232' of data logger which measures the wind condition into CAN protocol, the data error rate was minimized. Also, This paper is introduced to make the best use of the developed monitoring system and to explain about construct of the system and detailed data communication of its system.

• Nuclear Engineering and Technology
• /
• 제52권9호
• /
• pp.2130-2137
• /
• 2020

The standard method for calculating anti-neutrino emissions from a reactor involves knowing the fractional fission rates for the most important fissioning nuclides in the reactor. To calculate these rates requires detailed reactor physics calculations based upon the reactor design, fuel design, burnup dependent fuel composition, location of specific fuel assemblies in the core and detailed operational data from the reactor. This has only been published for a few reactors during specific time periods, whereas to be of practical use for anti-neutrino reactor monitoring it is necessary to be able to predict these on the publicly available information from any reactor, especially if using these data to subtract the anti-neutrino signal from other reactors to identify an undeclared reactor and monitor its operation. This paper proposes a method to estimate the fission fractions for a specific reactor based upon publicly available information and provides a database based upon a series of spent fuel inventory calculations using the FISPIN10 code and its associated data libraries.

• 한국통신학회논문지
• /
• 제25권3B호
• /
• pp.504-509
• /
• 2000

This paper presents a noble operation and maintenance system for the optical subscriber loops and its feasibility through several experiments. In this system, a broadband CW (Continuous Wave) light source I used as monitoring of testing signals. and a FGF(Fiber Grating Filter) of which reflective wavelength is independent, is inserted somewhere in each subscriber loop for the reflection of monitoring of testing signals. The propose of the system is quick decision. whether the loop is just fault or not. rather than detailed information of loop state. At present, most of operation and maintenance system for the optical subscriber loops adopts OTDR(optical time domain reflectometer) for testing function. the OTDR is useful for detailed test, but not adequate for simple test because of long testing time . And it is difficult to test PON network by using general OTDR that has a single-wavelength light source. Compared to using OTDR, the proposed system can afford to shorten testing time and to test PON network. Moreover, we can cut down the system cost by simplifying circuits of the optical light sources. Our results show that the proposed system operates well according to the purpose mentioned above.

• Nuclear Engineering and Technology
• /
• 제46권1호
• /
• pp.101-108
• /
• 2014

About 40% of reactors in the world are being operated beyond design life or are approaching the end of their life cycle. During long-term operation, various degradation mechanisms occur. Fatigue caused by alternating operational stresses in terms of temperature or pressure change is an important damage mechanism in continued operation of nuclear power plants. To monitor the fatigue damage of components, Fatigue Monitoring System (FMS) has been installed. Most FMSs have used Green's Function Approach (GFA) to calculate the thermal stresses rapidly. However, if temperature-dependent material properties are used in a detailed FEM, there is a maximum peak stress discrepancy between a conventional GFA and a detailed FEM because constant material properties are used in a conventional method. Therefore, if a conventional method is used in the fatigue evaluation, thermal stresses for various operating cycles may be calculated incorrectly and it may lead to an unreliable estimation. So, in this paper, the modified GFA which can consider temperature-dependent material properties is proposed by using an artificial neural network and weight factor. To verify the proposed method, thermal stresses by the new method are compared with those by FEM. Finally, pros and cons of the new method as well as technical findings from the assessment are discussed.