• Proceedings of the KAIS Fall Conference
• /
• 2003.11a
• /
• pp.45-49
• /
• 2003

GDS (Grating automatic Drawing System), which is automatic design system of metal products called grating, is a system that produces various detailed drawings on the basis of information within a Plan Drawing that represents layout of the gratings such as locations, shapes, directions, etc However, automatically produced drawings by GDS do not fully satisfy the standard of the general dimension marking method used among the layout designers. The lack of this standard quality mainly results from the fact that overlapping among dimension markings appears frequently. To solve the overlapping problem we applied the rule-based expert system. The rules for the expert system are designed based on the expertise of skilled layout designers within the grating production lines.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2175-2184
• /
• 2009

This paper describes operational analysis results of the DC micro-grid using detailed model of distributed generation. Detailed model of wind power generation, photo-voltaic generation, fuel-cell generation was implemented with the user-defined model of PSCAD/EMTDC software that is coded with C-language. The operation analysis was carried out using PSCAD/EMTDC software, in which the power circuit is implemented by built-in model and the controller is modelled by user-defined model that is also coded with C-language. Various simulation results confirm that the DC micro-grid can operate without any problem in both the interconnected mode and the islanded mode. The operation analysis result confirms that the DC micro-grid make it feasible to provide power to the load stably. And it can be utilize to develop the actual system design and building.

• Nuclear Engineering and Technology
• /
• v.46 no.1
• /
• pp.47-54
• /
• 2014

The protection of nuclear safety software is essential in that a failure can result in significant economic loss and physical damage to the public. However, software security has often been ignored in nuclear safety software development. To enforce security considerations, nuclear regulator commission recently issued and revised the security regulations for nuclear computer-based systems. It is a great challenge for nuclear developers to comply with the security requirements. However, there is still no clear software development process regarding security activities. This paper proposes an integrated development process suitable for the secure development requirements and system security requirements described by various regulatory bodies. It provides a three-stage framework with eight security activities as the software development process. Detailed descriptions are useful for software developers and licensees to understand the regulatory requirements and to establish a detailed activity plan for software design and engineering.

• International Journal of Advanced Culture Technology
• /
• v.7 no.3
• /
• pp.158-165
• /
• 2019

Knowledge based system includes tools for constructing, testing, validating and refining the system along with user interfaces. An important issue in the design of a complete knowledge based system is the ability to produce explanations. Explanations are not just a series of rules involved in reasoning track. More detailed and explicit form of explanations is required not only for reliable reasoning but also for maintainability of the knowledge based system. This requires the explanation mechanisms to extend from knowledge oriented analysis to task oriented explanations. The explicit modeling of problem solving structures is suggested for explanation generation as well as for efficient and effective reasoning. Unlike other explanation scheme such as feedback explanation, the detailed, smaller and explicit representation of problem solving constructs can provide the system with capability of quality explanation. As a key step to development for explanation scheme, the problem solving methods are broken down into a finer grained problem solving primitives. The system records all the steps with problem solving primitives and knowledge involved in the reasoning. These are used to validate the conclusion of the consultation through explanations. The system provides user interfaces and uses specific templates for generating explanation text.

• 한국연소학회:학술대회논문집
• /
• 1997.06a
• /
• pp.135-151
• /
• 1997

The preliminary design and performance test for determining dimensions of gas turbine combustor were investigated. The combustor design program was developed and applied to design our combustor. and detailed design for determining of swirler. dome and liner holes were performed experimentally. The swirler. which govern the combustion characteristics of combustor, was determined $40^{\circ}$ as swirl angle at first performance test. After second performance test the swirler was re-determined by 24 mm i.d.. 34 mm o.d., and swirl angle of $45^{\circ}$. The geometry of liner holes were determined by considering the flame stability and recirculation zone size. It was found that flame can be more easily stabilized by adjusting the swirier dimensions rather than liner holes. The geometry of swirler and liner holes were re-determined by final performance test with dilution holes. Also. the performance of combustor was evaluated by analysis of exhaust gases.

• International Journal of High-Rise Buildings
• /
• v.2 no.1
• /
• pp.31-38
• /
• 2013

The movement towards sustainable building design can result in unique fire protection challenges and concerns, especially with super tall buildings in relationship to traditional prescriptive code compliance. Different countries haves different code requirements as well as local best practices and may cause conflict with the design features when designing green buildings. These include, but not limited to green roofs, sprinkler water quality and testing, fire department access and areas of refuge with direct or indirect impact by the perspective code compliance. The solutions to these prescriptive code challenges and fire safety concerns can range from simple alternatives to more detailed engineering performance-based design analyses with good solid practice.

• Journal of the Ergonomics Society of Korea
• /
• v.20 no.1
• /
• pp.87-113
• /
• 2001

This study introduces the concept of image/impression of a product design, human interface elements, and the relationships between them. It is assumed that the human interface can be decomposed into detailed design elements, called human interface elements. This study attempts to build functional relationships between the image/impression of a product and human interface elements. Two different human factors experiments were conducted to demonstrate the effectiveness of the approach suggested in this study. A total of 35 audio/visual consumer electronics products (e.g., CD players, VCRs) were shown on a display screen and the subjects were instructed to evaluate them in terms of eight image/impression dimensions. One experiment was conducted using Korean subjects while the other using American subjects. The functional relationships were modeled by using the multiple linear regression technique. Similarity and difference between the Korean and the American subjects were analyzed. The approach suggested in this study is expected to help designers and developers identify important design variables to enhance the subjective satisfaction of a product design.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.35 no.12
• /
• pp.560-566
• /
• 1986

In the design of an RF discharge system, the electrical equivalence of the gas discharge must be known. With this knowledge, one can design a suitable matching network for a maximum power transfer from the RF generator into the discharge. For this purpose, an experiment has been conducted in which the electrical impedance (conductance and capacitance) was determined as a function of power. In parallel with this, a detailed theoretical analysis has been done and the results are in accord with those of our experiment. Design equations are also given for a simple matching network, and a design example is presented to demonstrate its application. During the actual operation of an RF discharge system, however, it has been often observed that the reflected power tends to vary in small values due to the changes in the impedance of the system. This problem can be relieved by adding an automatic impedance matching circuit to the system and this paper presents such an automatic impedance matching network.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.13-16
• /
• 2002

In this research, the design methods of the rocket joint parts were suggested. In the first section, nonlinear finite element analyses for joint parts of a composite pressure tank were performed. In the analyses, the detailed finite element modeling was performed and complex boundary conditions(contact problem, clamping force) were considered. Secondly, several guidelines for the design of joint parts were suggested. The parametric study for geometric design variables was peformed. Finally, the parametric study result was categorized for the multi-Joint part design of the axi-symmetric composite structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2445-2450
• /
• 2011

Design of reformate fractionation process using a fully thermally coupled distillation is conducted with commercial design software Aspen HYSYS. Detailed procedure of the design is explained, and the performance of the process is compared with that of a conventional system. The design outcome indicates that the procedure is simple and efficient. The performance of the new process indicates that an energy saving of 12.2% is obtained compared with the conventional process while total number of trays maintains at the same.