• Structural Engineering and Mechanics
• /
• v.49 no.1
• /
• pp.111-128
• /
• 2014

The stochastic response surface method (SRSM) and the response surface method (RSM) are often used for structural reliability analysis, especially for reliability problems with implicit performance functions. This paper aims to compare these two methods in terms of fitting the performance function, accuracy and efficiency in estimating probability of failure as well as statistical moments of system output response. The computational procedures of two response surface methods are briefly introduced first. Then their capabilities are demonstrated and compared in detail through two examples. The results indicate that the probability of failure mainly reflects the accuracy of the response surface function (RSF) fitting the performance function in the vicinity of the design point, while the statistical moments of system output response reflect the accuracy of the RSF fitting the performance function in the entire space. In addition, the performance function can be well fitted by the SRSM with an optimal order polynomial chaos expansion both in the entire physical and in the independent standard normal spaces. However, it can be only well fitted by the RSM in the vicinity of the design point. For reliability problems involving random variables with approximate normal distributions, such as normal, lognormal, and Gumbel Max distributions, both the probability of failure and statistical moments of system output response can be accurately estimated by the SRSM, whereas the RSM can only produce the probability of failure with a reasonable accuracy.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.1
• /
• pp.29-36
• /
• 2016

The East African ionosphere (3°S-18°N, 32°E-50°E) was mapped using Total Electron Content (TEC) measurements from ground-based GPS receivers situated at Asmara, Mekelle, Bahir Dar, Robe, Arbaminch, and Nairobi. Assuming a thin shell ionosphere at 350 km altitude, we project the Ionospheric Pierce Point (IPP) of a slant TEC measurement with an elevation angle of >10° to its corresponding location on the map. We then infer the estimated values at any point of interest from the vertical TEC values at the projected locations by means of interpolation. The total number of projected IPPs is in the range of 24-66 at any one time. Since the distribution of the projected IPPs is irregularly spaced, we have used an inverse distance weighted interpolation method to obtain a spatial grid resolution of 1°×1° latitude and longitude, respectively. The TEC maps were generated for the year 2008, with a 2 hr temporal resolution. We note that TEC varies diurnally, with a peak in the late afternoon (at 1700 LT), due to the equatorial ionospheric anomaly. We have observed higher TEC values at low latitudes in both hemispheres compared to the magnetic equatorial region, capturing the ionospheric distribution of the equatorial anomaly. We have also confirmed the equatorial seasonal variation in the ionosphere, characterized by minimum TEC values during the solstices and maximum values during the equinoxes. We evaluate the reliability of the map, demonstrating a mean error (difference between the measured and interpolated values) range of 0.04-0.2 TECU (Total Electron Content Unit). As more measured TEC values become available in this region, the TEC map will be more reliable, thereby allowing us to study in detail the equatorial ionosphere of the African sector, where ionospheric measurements are currently very few.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.2
• /
• pp.143-150
• /
• 2003

An improved MPPT converter with current compensation method for small-scaled PV-applications is presented in this paper. The proposed method implements maximum power point tracking (MPPT) by variable reference current which is continuously changed during one sampling period. Therefore, the Power transferred to the load is increased above 9% by the proposed MPPT converter with current compensation method. As a result, the utilization efficiency of Photovoltaic (PV)-panel can be increased. In addition, as it doesn't use digital signal processor (DSP), this MPPT method has the merits of both a cost efficiency and a simple control circuit design. Therefore, it is considered that the proposed MPPT method is proper to low power, low cost PV-applications. The concept and control principles of the proposed Un moth()d are explained in detail and its validity of the proposed method is verified through several simulated results.

• Journal of Forest and Environmental Science
• /
• v.17 no.1
• /
• pp.74-87
• /
• 2001

When the revegetation of the slopes is required, it is more desirable to consider it from the ecological view point rather than from the disaster-preventive one because the environment is critical for the introduction of pioneer plants to the denuded slopes. The ecological point of view adheres to the maintenance of the present, original ecosystem of the construction area. The new revegetation technology is presented using native microorganisms and its effective usuage was discussed based on the data in the research field. Direct seeding is recommended and explained in detail than planting seedlings. The importance of inclination angle of slope face is shown for the successful revegetation from its relationship with the thickness of soil. It is indicated that the introduction of pilot plants to the slopes should include their ability to ease the acid rain effects as much as possible. Finally every construction may not be desirable for the maintenance and improvement of the global ecosystem without the consideration of the opinions mentioned above.

• Journal of Elementary Mathematics Education in Korea
• /
• v.19 no.1
• /
• pp.17-37
• /
• 2015

In this paper, we compared and analyzed the Korean National Mathematics textbooks of the 2007 amendment curriculum and the Harcourt Math in America focused on fractions and decimals. To summarize the results of the analysis are as follows. First, both textbooks introduce fractions to the meaning of parts-whole concept, but the Harcourt Math is stronger than that of Korean Mathematics textbooks in the concept of unit fractions as a generator of fractions. Second, the fractions can be considered trivial materials - a fraction representing 1 whole, a fraction with it's denominator is 1 - were more clearly represented in our US textbooks than those of our Korean textbooks. Third, in the introduction of the term relating to the fractions, Korea is a strong point of view of the classification of fractions than the point of view of representation in comparison with the case of the United States. Fourth, the equivalent fraction and equivalent decimal concepts were described more detail in the United States of textbooks than those of the case of Korean textbooks. Finally, the approaches of fraction and decimal concepts were introduced more mathematically in the case of the United States than those of the case of Korean textbooks.

• Earthquakes and Structures
• /
• v.8 no.6
• /
• pp.1363-1386
• /
• 2015

The October 23 2011 Van Earthquake is studied from an earthquake engineering point of view. Strong ground motion processing was performed to investigate features of the earthquake source, forward directivity effects during the rupture process as well as local site effects. Strong motion characteristics were investigated in terms of peak ground motion and spectral acceleration values. Directiviy effects were discussed in detail via elastic response spectra and wide band spectograms to see the high frequency energy distributions. Source parameters and slip distribution results of the earthquake which had been proposed by different researchers were summarized. Influence of the source parameters on structural response were shown by comparing elastic response spectra of Muradiye synthetic records which were performed by broadband strong motion simulations of the earthquake. It has been emphasized that characteristics of the earthquake rupture dynamics and their effects on structural design might be investigated from a multidisciplinary point of view. Seismotectonic calculations (e.g., slip pattern, rupture velocity) may be extended relating different engineering parameters (e.g., interstorey drifts, spectral accelerations) across different disciplines while using code based seismic design approaches. Current state of the art building codes still far from fully reflecting earthquake source related parameters into design rules. Some of those deficiencies and recent efforts to overcome these problems were also mentioned. Next generation ground motion prediction equations (GMPEs) may be incorporated with certain site categories for site effects. Likewise in the 2011 Van Earthquake, Reverse/Oblique earthquakes indicate that GMPEs need to be feasible to a wider range of magnitudes and distances in engineering practice. Due to the reverse faulting with large slip and dip angles, vertical displacements along with directivity and fault normal effects might significantly affect the engineering structures. Main reason of excessive damage in the town of Erciş can be attributed to these factors. Such effects should be considered in advance through the establishment of vertical design spectra and effects might be incorporated in the available GMPEs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.10
• /
• pp.949-957
• /
• 2017

A laser-vision-based height measurement system is developed and implemented for the inspection of two-step variable valve lift module assemblies. The proposed laser-vision sensor module is designed based on the principle of laser triangulation. This paper summarizes the work on 3D point cloud data collection and height difference measurements. The configuration of the measurement system and the proposed height measurement algorithm are described and analyzed in detail. Additional measurement experiments on the height differences of valves and lash adjusters of a two-step variable valve lift module were implemented repeatedly to evaluate the accuracy and repeatability of the proposed measurement system. Experimental results show that the proposed laser-vision-based height measurement system achieves high accuracy, repeatability, and stabilization for the inspection of two-step variable valve lift module assemblies.

• Korean Institute of Interior Design Journal
• /
• v.16 no.6
• /
• pp.250-257
• /
• 2007

Characteristics of color application indicated from Kirchsteigfeld is presented the various points of view to be preserved urban housing color. It had been handled as environmental color by view point of community and connectivity rather than color scheme of single housing. First, color to be consisted of basis for urban entirely as background color in urban housing complex has been indicated the bright and cheerful feelings and expressed to be introduced mostly from the single color system. Second, characteristics to be inhibited strongly from housing complex had been indicated by restricted four types of color, formulated the overall context and change through accent and the change from disposition of principal and the accessary of color scheme. In this case, it was not regular formulation, but as a whole category view, it could be provided by orderly regularity system strictly Particularly it had been applied as a whole for lightness change by single color, introduced the different color of building to be centered or remained by a visual point. This had been formed to introduction of color by stand points of housing group not introduction to color by sole concept of building. Third, emphasizing of morphologic feeling by using of difference of lightness, it could be indicated the mild and comfortable stereo-type sensibility from the overall types of housing, we could understand for formation of color code by lightness of slightly differences. Fourth, it had been taken the convenient adaptation method for maintenance of simple graphic system as a environmental color. It has considerable advantage for sustainability of color to indicate on finishing material, form and detail in architecture, as the sole separated color not to be complicated when to be painted over and again or managed continuously.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.9-17
• /
• 2016

Maximum power point tracking (MPPT) is necessary for photovoltaic (PV) power system application to extract the maximum possible power under changing irradiation and temperature conditions. The β-parameter-based method has many advantages over conventional MPPT methods; such advantages include fast tracking speed in the transient stage, small oscillations in the steady state, and moderate implementation complexity. However, a problem in the implementation of the conventional beta method is the choice of an appropriate scaling factor N, which greatly affects both the steady-state and transient performance. Therefore, this paper proposes a modified β-parameter-based method, and the determination of the N is discussed in detail. The study shows that the choice of the scaling factor N is determined by the changes of the value of β during changes in irradiation or temperature. The proposed method can respond accurately and quickly during changes in irradiation or temperature. To verify the proposed method, a photovoltaic power system with MPPT function was built in Matlab/Simulink, and an experimental prototype was constructed with a solar array emulator and dSPACE. Simulation and experimental results are illustrated to show the advantages of the improved β-parameter-based method with the optimized scaling factor.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.314-323
• /
• 2008

The purpose of this study is to show the optimal leadership model based on general manager management that is related to hotel employees, which may then be applied to ideal hotel management in Korea. The variables analyzed in this study are employee-management relations from the lowest ranking employee to the highest level of management, with communication and job understanding held common among the subjects. This study looks in detail at four main concepts. Firstly, the employees are encouraged to put forth their best efforts through the standardization of the requirements and regulations of the job and ensuring product suitability. Secondly, the cultivation of new hotel culture empowers the employees. The third point taken into account is the encouragement of employees to take pride in the work they do, which is done through a kind of reward system and salary. The final point considered is the empowerment of employees, which results in employee commitment to the job.