• Journal of Science Education
• /
• v.34 no.1
• /
• pp.93-104
• /
• 2010

The purpose of this study was to investigate the high school students' interests and and perceptions about the soil concepts. The data were obtained from 72 boys and 82 girls at a high school in Daegu area. The questionnaires were developed 8 questions for students' interest and 10 questions for students' understanding. The results of this study were as follows. In the examination of students' interest on the soil concepts, boys showed 3.2point(64.9%) out of 5point and girls showed 3.2point(64.6%) out of 5 point. Furthermore, a percentage of correct answers for understanding on the soil concepts was 47.4%. In detail, Boys had 48.2% and girls had 46.6%, boys showed higher understanding about soil concepts than girls. And students understood soil concepts by a visible side, to approach the soil concepts from a biological point of view, rather than a geologic one. Also high school students didn't think soil concepts to consist of minerals and rocks from a geologic point of view. Correlation between interest and understanding on the soil concepts was very weak by showing r=.170(p<.05).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.152-157
• /
• 2014

Digital still camera generally uses optical low-pass filter(OLPF) to enhance its image quality because it removes high spatial frequencies causing aliasing. However, the use of OLPF causes some loss of detail. On the other hand, when image are captured by using no OLPF, the moir$\acute{e}$ is generally existed in high spatial frequency region of an image. Therefore, in this paper, moir$\acute{e}$ reduction method in case of using no OLPF is suggested. To detect the moir$\acute{e}$, spatial frequency response(SFR) of camera was firstly analyzed by using ISO 12233 resolution chart. Then, moir$\acute{e}$ region is detected by using the patterns that are related to the SFR of camera. next, this region is analysed in the frequency domain. Then, the moir$\acute{e}$ is reduced by removing its frequency component, which represents inflection point between high frequency and DC components. Through the experimental results, it is shown that the proposed method can achieve moir$\acute{e}$ reduction with preserving the detail.

• Convergence Security Journal
• /
• v.7 no.3
• /
• pp.87-93
• /
• 2007

We propose a mobile point-of-sale system, which consists of only mobile information terminals and personal computers. The proposed system provides most of functionalities related with resource planning, adminstration and management, provided by medium-scale or large-scale POS systems, with additional functionalities, such as automatic information gathering and management through mobile interconnection, while eliminating the necessity of additional special-purpose devices, such as bar-code systems. The proposed system transmits order information through wireless and wired communication lines, thus allowing real-time sharing of order information among diverse information devices, such as mobile order receiving terminals, main server within stores, monitors and printers located in production lines. Also, the system is able to transfer such detail information produced within stores in real-time to the enterprise-level accounting, sales, logistics, personnel management system, which facilitate enterprise-wide management and administrative decision-making. No additional programs are required for mobile terminals. Order information received by such terminals are entered into databases through web server of main server and that information is again transferred to main server and production line printers. The proposed system can handle all the point-of-sale information and can provide almost of the POS functionalities by simply utilizing wireless internet, personal computers, and mobile terminals without installing specific-purpose peripheral devices. The proposed system can be widely applied to the small-scale stores and will contribute in reducing construction and maintenance cost required for point-of-sale management.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.285-288
• /
• 2007

The use of commercial finite element analysis software to perform the entire process analysis and springback analysis has increased fast for last decade. Pamstamp2G is one of commercial software to be used widely in the world but it has still not been perfected in the springback prediction accuracy. We must select the combination of input parameters for the highest springback prediction accuracy in Pamstamp2G because springback prediction accuracy is sensitive to input parameters. Then we study the affect of input parameters to use member part for acquiring high springback prediction accuracy in Pamstamp2G. First, we choose important four parameters which are adaptive mesh level at drawing stage and cam flange stage, Gauss integration point number through the thickness and cam offset on basis of experiment. Second, we make a orthogonal array table L82[(7)] which is consist of 8 cases to be combined 4 input parameters, compare to tryout result and select main factors after analyzing affect factors of input parameters by Taguchi's method in 6 sigma. Third, we simulate after changing more detail the conditions of parameters to have big affect. At last, we find the best combination of input parameters for the highest springback prediction accuracy in Pamstamp2G. The results of the study provide the selection of input parameters to Pamstamp2G users who want to Increase the springback prediction accuracy.

• The Journal of the Korea Contents Association
• /
• v.8 no.10
• /
• pp.287-300
• /
• 2008

The purpose of this study is to show the optimal leadership model based on general manager management that is related to hotel employees, which may then be applied to ideal hotel management in Korea. The variables analyzed in this study are employee-management relations from the lowest ranking employee to the highest level of management, with communication and job understanding held common among the subjects. This study looks in detail at four main concepts. Firstly, the employees are encouraged to put forth their best efforts through the standardization of the requirements and regulations of the job and ensuring product suitability. Secondly, the cultivation of new hotel culture empowers the employees. The third point taken into account is the encouragement of employees to take pride in the work they do, which is done through a kind of reward system and salary. The final point considered is the empowerment of employees, which results in employee commitment to the job.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.1
• /
• pp.39-55
• /
• 1993

Modal Analysis is the process of characterizing the dynamic properties of an elastic structure by identifying its modes of vibration. A mode of vibration is a global property of an elastic structure. That is, a mode has a specific natural frequency and damping factor which can be identified from response data at practically any point on a structure, and it has a characteristic mode shape which identifies the mode spatially over the entire structure. Modal testing is able to be performed on structural and mechanical structure in an effort to learn more about their elastic behavior. Once the dynamic properties of a structure are known its behavior can be predicted and therefore controlled or corrected. Resonant frequencies, damping factors and mode shape data can be used directly by a mechanical designer to pin point weak spots in a structure design, or this data can also be used to confirm or synthesize equations of motion for the elastic structure. These differential equations can be used to simulate structural response to know input forces and to examine the effects of pertubations in the distributed mass, stiffness and damping properties of the structure in more detail. In this paper the measurement of transfer functions in digital form, and the application of digital parameter identification techniques to identify modal parameters from the measured transfer function data are discussed. It is first shown that the transfer matrix, which is a complete dynamic model of an elastic plate structure can be written in terms of the structural modes of vibration. This special mathematical form allows one to identify the complete dynamics of the structure from a much reduced set of test data, and is the essence of the modal approach to identifying the dynamics of a structure. Finally, the application of transfer function models and identification techniques for obtaining modal parameters from the transfer function data are discussed. Characteristics on vibration response of elastic plate structure obtained from the dynamic analysis by Finite Element Method are compared with results of modal analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.152-157
• /
• 2006

In this paper, we have analyzed the effects of interference from HAPS ground stations to P-MP FWA base station and to P-MP FWA terminal station using more detail parameters such as a new interference model, a realistic HAPS scenario, practical antenna patterns for both the HAPS system and FWA systems. The analysis results show that, in the case of interference from HAPS GSs into a P-MP BS, compatibility of the two systems can be obtained by using a sectored BS antenna with the boresight directed away from the nadir. However, in the case of interference from HAPS GSs into a P-MP TS, the two systems cannot operate effectively in the same band unless the separation distance is guranteed and/or some form of interference mitigation technique is employed such as dynamic channel allocation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.864-870
• /
• 2015

With the growing interests in ICT convergence, interdisciplinary researches are still actively discussed and studied today such as cultural atlas DB, electronic cultural atlas. Electronic cultural atlas can show various cultural aspects on the map by using point, line, polygon, and so on. Users can obtain the informations connected to the three values through manipulating theme, spatial and time values. In this regard, text information can be visualized as various ways like point, line, and polygon on the map. This can make the user get information effectively by usability, accessibility and immediacy of the system. In this paper, we implemented academic journal map system based on the electronic cultural atlas using Google Maps. This system supports various journals information services based on electronic cultural atlas and can be used efficiently as a tool for academic trends analysis. Also, it provides academic material through visualization of information based on the map. In detail, it can be utilized as the foundations for research of Humanities and Area Studies.

• Journal of Power System Engineering
• /
• v.21 no.6
• /
• pp.31-39
• /
• 2017

In order to examine if met-masts wind data can exchange each other for wind resource assessment, an investigation was carried out in Kimnyeong and Haengwon regions of Jeju Island. The two regions are both simple terrain and 4.31 km away from each other. The one-year wind speed data measured by 70 m-high anemometers of each met-mast of the two regions were analysed in detail. Measure-Correlate-Predict (MCP) method was applied to the two regions using the 10-year Automatic Weather System (AWS) wind data of Gujwa region for creating 10-year Wind Statistics by running WindPRO software. The two 10-year Wind Statistics were applied to the self-met mast point for self prediction of Annual Energy Production (AEP) and Capacity Factor (CF) and the each other's met mast point for mutual prediction of them. As a result, when self-prediction values were reference, relative errors of mutual prediction values were less than 1% for AEP and CF so that met masts wind data under the same condition of this study could exchange each other for estimating accurate wind resource.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.3
• /
• pp.289-299
• /
• 2006

Orthotropic steel decks are manufactured by welding thin plates therefore it is inevitable that there are abundant works of welding process. On connection of transverse rib web, crossing point of longitudinal rib, transverse rib and deck plate and cut-out parts of transverse rib are the significant position of stress concentration phenomenon because of out of plane and oil-caning deformation caused by longitudinal rib distortion with shear force and distortion. In order to reduce the stress concentration phenomenon and improving fatigue performance at the crosing point and cut-out, structural analysis was performed considering the existence of scalop at conection and diaphragm which have same plane with transverse rib placed inside of longitudinal rib. Result o f the analysis show that there are the largest efect of stres concentration reduction when diaphragms are installed without scallop at connection, therefore these detail can improve the fatigue performance of orthotropic steel decks.