• Title/Summary/Keyword: Desk top size

Search Result 9, Processing Time 0.026 seconds

Feasibility of Manufacturing Desk and Chair with Curved Veneer Lamination (단판 적층성형 학생용 책상.의자의 제조적성)

  • Suh, Jin-Suk;Park, Jong-Young;Han, Ki-Man
    • Journal of the Korea Furniture Society
    • /
    • v.16 no.2 s.30
    • /
    • pp.59-65
    • /
    • 2005
  • As physical condition of students improves, there is a need to develop human body-friendly desk and chair for students. In this study, desks and chairs were manufactured with curved veneer lamination under high frequency heating and pressing, using ten wood species such as Japanese red pine, Korean pine, pitch pine, Japanese larch, yellow poplar, black locust, oak, radiata pine, beech, and birch. The performance of these products were evaluated. The results obtained were summarized as follows; With high frequency heating, the turned lamination of veneers with full size sheet ($3{\times}6\;feet$) prepared by rotary lathe peeling was successfully applied for making the members of desk top, leg frames of desk and chair. Bending strengths of desk tops were relatively greater for yellow poplar, black locust and red pine, which were similar to those of beech and birch. Bending strengths of desk legs were classified into greater species group (red pine, yellow poplar, larch) and lower species group (radiata pine, Korean pine, pitch pine). Compressive strengths of chair legs in parallel direction to the lamination were greater in black locust and larch. On the other hand, differences between outer and inner gap at the top and drawer bottom of desk top were rather larger for the laminations of birch and beech, and less for those of yellow poplar and pitch pine, showing greater stability of open drawer space. In results, yellow poplar, larch, pitch pine and red pine showed good appearance and strength properties at the curved veneer lamination. Accordingly, it was believed that these domestic woods were able to substitute for birch which was being imported for the use of veneer-laminates type furniture.

  • PDF

Design and Control of Mini-Scanning Electron Microscope (미니형 주사전자 현미경의 설계 및 제어)

  • Park, Man-Jin;Kim, Dong-Hwan;Kim, Young-Dae;Jang, Dong-Young;Han, Dong-Chul
    • Proceedings of the KSME Conference
    • /
    • 2007.05a
    • /
    • pp.1271-1276
    • /
    • 2007
  • The most powerful analytical equipment usually comes at the cost of having the highest demand for space. Where electron microscopes has traditionally required a room to themselves, not just for reasons of their size but because of ancillary demands for pipes and service. The simple optical microscopes, of course, can occupy the desk-top, but because their performance is limited by the wavelength of light, their powers of magnification and resolution are inferior to that of the electron microscope. Mini SEM will sit comfortably on a desk-top but offers magnification and resolution performances much closer to that of a standard SEM. This new technique extends the scope of SEM as a high-resolution microscope, relatively cheap and widely available imaging tool, for a wider variety of samples.

  • PDF

Optimal Miniaturization of Desk-Top Computer by Thermal Design (열유동 해석을 이용한 컴퓨터 구조의 소형화 설계)

  • 박성관
    • Korean Journal of Computational Design and Engineering
    • /
    • v.4 no.4
    • /
    • pp.318-326
    • /
    • 1999
  • Recently, electronic systems including computers have been rapidly shrinking in size while at the same time the complexity and the capability of these systems continue to grow/sup [1]/. Thus, system volumes have decreased as system power has increased, resulting in dramatic increases in system heat density. The high temperature of the computer system is considered as the major reason for low performance and shortening life of the product. It is necessary to solve this problem due to the heat density increased and to develop the design skill of the computer cabinet according to miniaturization. M4500 desk-top computer was selected for analyzing the thermal management inside cabinet. The cabinet volume, the configuration of the heating devices, the size and location of air ventilation, and the fan selection have been investigated as the important parameters to find out an optimal cabinet design. The objectives of this project were to analyze which design parameters would affect cooling performance by thermal strategy, to design an optimal model, and to measure the temperatures of the main parts to confirm the effect of the thermal design. The temperatures of each part of the optimal model were compared with those of the existing model. As a result. the volume of this miniaturized model was about 16% smaller than that of M4500 without any change in operating performance.

  • PDF

Manufacture of Top Table for Computer Desk by Wasted-Wood Materials (폐기 목질재료에 의한 컴퓨터 책상판의 제조)

  • 노정관;도정락
    • Journal of the Korea Furniture Society
    • /
    • v.13 no.2
    • /
    • pp.1-10
    • /
    • 2002
  • A computer top table was manufactured with the solid wood wastes that has been landfilled, combustion or burnt as a fuel at the present time. The computer table is different in form and size to that of existing fixed rectangular. It is idea1 product not only convenient and functional to use and beautiful design but also processing Performance of edge area and overlaying properties. The main technologies to develop this computer top table are plan for moulder to mould the Product and producing, molding the most suitable material and composition, suitable adhesives selecting and synthetic technology, investigation for the moulding conditions such as temperature, time etc, adequate overlaying materials selecting and overlaying technology have to be chocked.

  • PDF

A Study on the Micro Structure Fabrication using Electrolytic In-process Dressing (전해 연속 드레싱을 이용한 마이크로 구조물 제작)

  • 이현우;최재영;정해도;이석우;최헌종
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2002.10a
    • /
    • pp.258-261
    • /
    • 2002
  • In this study, micro tools(WC) to produce micro-structure and parts, were fabricated ell a cylindrical grinding machine using ELID(Electrolytic In-process Dressing) technique. The shape of the micro-carbide tool was square, corn. The size of the micro-carbide tool was measured less than 10$\mu\textrm{m}$ respectively by SEM(Scanning Electron Microscope). Furthermore, we fabricated micro structure by different processing methods on the desk top cylindrical grinding machine. The manufactured shape was like a tower and the measurement showed that the endpoint of micro structure was $50{\times}50$$\mu{\textrm}{m}$.

  • PDF

Discharge characteristics of FFL as the variation of cell structure (셀 구조 변화에 따른 FFL(Flat Fluorescent Lamp)의 방전특성)

  • 윤성현;박철현;조민정;임민수;권순석;임기조
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2000.07a
    • /
    • pp.600-603
    • /
    • 2000
  • Recently, Display devices have become important in the information-oriented society and flat display devices are greatly demanded. Liquid crystal display(LCD) represents one of the most promising devices for large size desk-top monitors, notebook PC and car navigation system. However LCD cannot give forth light itself and must have backlight system. The most popular backlighting system is composed of a lighting-guide plate and CCFL as a lighting source. The number of CCFL must increase up if the area of display is increased. So a new backlighting source with high luminance is needed for large LCDs. In this paper, we proposed a surface discharge FFL with the new electrode structure like the needle shaped electrode as the variation of cell structure to high luminance and low power consumption. In comparison with different electrode structure it has low discharge voltage and current and good optical characteristics. So it has better discharge characteristics than different surface discharge FFL and can be fungible for a backlight as a lighting source in LCDs.

  • PDF

A Study on the Calculation of the Area for Behavior as an Element in Planning the Floor Space of the Elderly Housing (노인주택 면적계획을 위한 요소로서 행위면적 산출 연구)

  • Lee, Youn-Jae;Lee, Hyun-Soo
    • Journal of the Korean housing association
    • /
    • v.20 no.1
    • /
    • pp.59-70
    • /
    • 2009
  • The purpose of the study is to suggest the amount of space for each behavior according to the classification of behavior in the housing to plan the optimal floor space of the elderly housing. The method for calculating space for behavior begins with classifying behaviors, identifying them and then taking pictures of the model of elderly people who reproduce each behavior. Based on the pictures, body parts which are necessary for each behavior are assembled and the formula for behavioral space is created. The space for behavior is produced considering the body dimensions of Korean elderly in their sixty's as well as the furniture size and the psychological distance between people. 3D modeling is used to verify the result. Human behaviors can be classified into individual-related, housework-related, family-related, reception-related and other behaviors. These five behaviors are subdivided into more specific behaviors. The area for each specific behavior is calculated with the anthropometric data of the elderly, preferred furniture dimension and psychological area. As a result the required area for specific behaviors is as follows: the behavior of sleeping in a bed needs $4.3m^2$; the behavior of changing clothes on a chair, $1.7m^2$; the behavior of watching TV on the floor $1.3m^2$, the behavior of working and reading using a desk, $2.1m^2$, the behavior of exercise, $2.5m^2$; the behavior of showering on a chair, $1.3m^2$ and showering using a wheelchair, $1.9m^2$; the behavior of toileting using a wheelchair, $2.3m^2$; the behavior of washing up using a wheelchair, $1.9m^2$; the behavior of eating using a table for four persons, $4.4m^2$; the behavior of cooking and washing dishes, $0.9m^2$ per counter-top; the behavior of washing clothes using a washing machine, $0.9m^2$; the behavior of ironing on the floor $1.4m^2$; the behavior of reception(three persons) on the floor considering personal space, $4.0m^2$; the behavior of taking on and off shoes on a chair, $1.3m^2$. The result of the study is utilized as quantitative data to calculate optimal floor space for elderly housing. In addition, qualitative data such as characteristics of housing preference, spacial usage and storage capacity are necessary to produce the floor space which can provide convenient and safe living environment.

E-Commerce in the Historical Approach to Usage and Practice of International Trade ("무역상무(貿易商務)에의 역사적(歷史的) 어프로치와 무역취인(貿易取引)의 전자화(電子化)")

  • Tsubaki, Koji
    • THE INTERNATIONAL COMMERCE & LAW REVIEW
    • /
    • v.19
    • /
    • pp.224-242
    • /
    • 2003
  • The author believes that the main task of study in international trade usage and practice is the management of transactional risks involved in international sale of goods. They are foreign exchange risks, transportation risks, credit risk, risk of miscommunication, etc. In most cases, these risks are more serious and enormous than those involved in domestic sales. Historically, the merchant adventurers organized the voyage abroad, secured trade finance, and went around the ocean with their own or consigned cargo until around the $mid-19^{th}$ century. They did business faceto-face at the trade fair or the open port where they maintained the local offices, so-called "Trading House"(商館). Thererfore, the transactional risks might have been one-sided either with the seller or the buyer. The bottomry seemed a typical arrangement for risk sharing among the interested parties to the adventure. In this way, such organizational arrangements coped with or bore the transactional risks. With the advent of ocean liner services and wireless communication across the national border in the $19^{th}$ century, the business of merchant adventurers developed toward the clear division of labor; sales by mercantile agents, and ocean transportation by the steam ship companies. The international banking helped the process to be accelerated. Then, bills of lading backed up by the statute made it possible to conduct documentary sales with a foreign partner in different country. Thus, FOB terms including ocean freight and CIF terms emerged gradually as standard trade terms in which transactional risks were allocated through negotiation between the seller and the buyer located in different countries. Both of them did not have to go abroad with their cargo. Instead, documentation in compliance with the terms of the contract(plus an L/C in some cases) must by 'strictly' fulfilled. In other words, the set of contractual documents must be tendered in advance of the arrival of the goods at port of discharge. Trust or reliance is placed on such contractual paper documents. However, the container transport services introduced as international intermodal transport since the late 1960s frequently caused the earlier arrival of the goods at the destination before the presentation of the set of paper documents, which may take 5 to 10% of the amount of transaction. In addition, the size of the container vessel required the speedy transport documentation before sailing from the port of loading. In these circumstances, computerized processing of transport related documents became essential for inexpensive transaction cost and uninterrupted distribution of the goods. Such computerization does not stop at the phase of transportation but extends to cover the whole process of international trade, transforming the documentary sales into less-paper trade and further into paperless trade, i.e., EDI or E-Commerce. Now we face the other side of the coin, which is data security and paperless transfer of legal rights and obligations. Unfortunately, these issues are not effectively covered by a set of contracts only. Obviously, EDI or E-Commerce is based on the common business process and harmonized system of various data codes as well as the standard message formats. This essential feature of E-Commerce needs effective coordination of different divisions of business and tight control over credit arrangements in addition to the standard contract of sales. In a few word, information does not alway invite "trust". Credit flows from people, or close organizational tie-ups. It is our common understanding that, without well-orchestrated organizational arrangements made by leading companies, E-Commerce does not work well for paperless trade. With such arrangements well in place, participating E-business members do not need to seriously care for credit risk. Finally, it is also clear that E-International Commerce must be linked up with a set of government EDIs such as NACCS, Port EDI, JETRAS, etc, in Japan. Therefore, there is still a long way before us to go for E-Commerce in practice, not on the top of information manager's desk.

  • PDF