• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1433-1434
• /
• 2008

LED has gained its importance in the projection display market from very compact, micro-projectors to potentially high output, desktop systems. In both of these systems, the output levels are less than desirable. This paper describes practical recycling and multiplexing systems that provide brightness increases, and allow projectors to achieve outputs beyond its current levels.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.43-43
• /
• 2018

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.2
• /
• pp.175-183
• /
• 1999

For fast response of the dc output voltage in P\hi1'v1 converter, it is desirable that the relation of power balance of the i input and output terminals is introduced to the system modeling. In this case, controller desi밍1 is not easy since the m model is nonlinear. In this paper, a nonlinear control them${\gamma}$ using input-output feedback linearization is used to solve t the nonlinear problem of the system. By nonlinear control. the voltage transient response can be faster, and it is also p possible to control the output voltage to be constant with smaller output filter capacitance for load disturbance.

• Journal of Mechanical Science and Technology
• /
• v.14 no.1
• /
• pp.57-64
• /
• 2000

Recent advances in the field of control theory have enabled us to design active vibration control systems for various structures. In many studies, the controller used to suppress vibration has been synthesized for the given mathematical model of structure. In these cases, the designer has not been able to utilize the degree of freedom to adjust the structural parameters of the control object. To overcome this problem, so called 'Structure/Control Simultaneous Optimization Method' is used. In this context of view, this paper is concerned with the active vibration control of bridge towers, platforms and ocean vehicles etc. Simultaneous design method is used to achieve optimal system performance. Here, a general framework for the simultaneous design problem of output feedback case is introduced based on LMI (Linear Matrix Inequality). The simulation results show that the proposed design method achieves desirable control performance.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.605-610
• /
• 1991

In inverter system for driving induction motor, the output harmonics are hamrful in induction motor drive because it leads to ripple torque and induction interference. For electrical drives using PWM(Pulsewidth Modulation) inverters and ac motors, the methods for efficiency optimal control have been developed. In this paper, two different PWM methods for inverter and voltage control technique are described. In order to reduce or minimize losses, various forms of PWM strategy such as, PM (Positive Modulation) and NM (Negative Modulation) are discussed. The results show the feasibility of obtaining practically sinusoidal output waveforms which are highly desirable in most inverter application.

• Journal of Korean Society for Quality Management
• /
• v.37 no.3
• /
• pp.123-139
• /
• 2009

This study examines the relative efficiency of 34 local public medical centers in Korea. In order to concretely grasp the causes of inefficiency and suggest improvement solutions, the desirable set point was established based on the actual value which needs to be improved. As a result of analysis, we determined that output must be increased while input is held constant in order to improve effectiveness through the actual value and set point. Efficiency cannot be achieved if input is augmented solely to increase output. Also, to increase output, the medical centers need to improve their quality without increasing any input for customer visits and hospitalizations. Further, in order to strategically promote effectiveness and efficiency of local public medical centers, these medical centers must focus on input resource and patient interchange through the mutual cooperation with local private hospitals and university medical centers.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.7
• /
• pp.59-65
• /
• 1996

A major problem in automation of turning operations is the difficulty in obtaining a sufficient and reliable chip control. Therefore it becomes desirable to find a method which can detect the chip form. Newly born chips in usual metal cutting radiate infrared rays. When such chips run out of cutting point quickly, the radiated energy from the zone around the tool is low compared with that of the case when long tangled chips are staying around the tool. The difference in chip pattern can be detected from the output of pyrometer. But, strictly speaking, only the output of pyrometer does not identify the chip form because that is the removal of chip. Therefore, in this paper, a method of the identification of chip form using output of pyrometer and fuzzy inference is developed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1571-1577
• /
• 2012

This paper presents a method for assessing the voltage sag performance of power system involving wind power generation. Wind power generation is considered as one of the most desirable renewable energy sources. However, wind power generation have uncertain energy output and it is difficult to control the output. The existing methods of voltage sag assessment are not reflected the characteristics of wind power generation. Therefore, in order to more accurately assess the voltage sag performance, the probability of wind power operation is evaluated. In this paper, the probability is determined by combining the wind speed model with the output curve of wind turbine. The probability of wind power operation is reflected as a parameter in voltage sag assessment. The proposed method can provide more accurate results of voltage sag assessment for the case involving the wind power generation.

• Proceedings of the KIPE Conference
• /
• 2004.11a
• /
• pp.64-69
• /
• 2004

This paper deals with an algorithm for controlling ac output voltage of Z-source inverter using Modified SVPWM (abbreviated as MSVPWM). Unlike the conventional space vector pulse width modulation, MSVPWM has one extra shoot-through zero time $T_{sh}$. During shoot-through zero time, both switches in a leg are conducted simultaneously in order to boost inverter output voltage to any desirable value regardless the line voltage. The algorithm to control linearly the capacitor voltage is suggested to improve the performance of Z-source inverter system. The performance of Z-source inverter using above algorithms is demonstrated in simulation results using PSIM. Index terms-Z-source inverter (ZSI), shoot-through time, three-phase carrier-based PWM, space vector PWM (SVPWM), modified space vector PWM (MSVPWM).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.12
• /
• pp.1625-1632
• /
• 1988

This paper aims not only to introduce the concept of linear singular systems, geometric structure, and feedback but also to provide applications of the multivariable linear singular system theories to electric circuits which may appear in some electronic equipments. The impulsive or discontinuous behavior which is not desirable can be removed by the set of admissible initial conditions. The output-nulling supremal (A,E,B) invariant subspace and the singular system structure algorithm are applied to this double-input double-output electric circuit. The Weierstrass form of the pencil (s E-A) is related to the output-nulling supremal (A,E,B) invariant subspace from which the time domain solutions of the finite and the infinite subsystems are found. The generalized Lyapunov equation for this application with feedback is studied and finally, the use of orthogonal functions in singular systems is discussed.