• 한국콘텐츠학회논문지
• /
• 제16권4호
• /
• pp.604-613
• /
• 2016

지구온난화로 인한 바닷물의 열팽창, 빙하의 해빙 등으로 지구의 해수면은 매년 약 2.0mm/yr의 속도로 상승하고 있다. 그러나 해안에 인접한 하천을 설계할 시 기준이 되는 외수위는 과거 관측된 조위 값으로부터 4대 분조 및 조화상수를 분석하여 결정된다. 따라서, 외수위는 구조물의 설계빈도에 상응하는 해수면의 상승속도를 감안해야 할 필요가 있다고 사료된다. 본 연구에서는 국립해양조사원에서 운영하고 있는 47개소의 조위관측소를 대상으로 관측개시일부터 2015년까지 시단위로 조위자료를 수집하였다. 우리나라를 크게 서해, 남해, 동해, 제주 총 4개의 해역으로 구분하여 연별 변동추이 및 연평균 상승률 분석을 수행하였다. 그리고 기존 설계된 해안에 인접한 하천의 외수위를 검토하였다. 추후 국지적 해수면상승의 원인규명 및 외수위 고려 시 기초자료로 활용될 것으로 판단된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.173-173
• /
• 2015

The flood water level in tidal river is determined by the joint effects of flood discharge and tidal water levels at downstream boundary. Due to the variable tidal boundary conditions, the evaluated design water levels associated with a certain flood event can be significantly different. To avoid determining of design water levels just by a certain tidal boundary condition and remove the influence of variability in boundary condition from the evaluation of design water levels, a probabilistic approach is considered in this study. This study focuses on the development of a method to evaluate the realistic design water levels in tidal river with taking into account the combined effects of river discharge and tidal level. The flood water levels are described by the joint probability of two driving forces, river discharge and tidal water levels. The developed method is applied to determine design water levels for the tidal reach of the Han River. An unsteady flow model is used to simulate the flow in the reach. To determine design water levels associated with a certain flood event, first, possible boundary conditions are obtained by sampling starting times of tidal level time series; then for each tidal boundary condition, corresponding peak water levels along the channel are computed; and finally, design water levels are determined by computing the expectations of the peak water levels. Two types of tides which are composed by different constituents are assumed (one is composed by $M_2$, and the other one is composed by $M_2$ and $M_2$) at downstream boundary, and two flood events with different maximum flood discharges are considered in this study. It is found that (a) the computed design water levels with two assumed tides have no significant difference for a certain flood event, though variability of peak water levels due to the tidal effect is considerably different; (b) tidal effect can reach to the Jamsil submerged weir and the effect is obvious in the downstream reach of the Singok submerged weir; (c) in the tidally affected reach, the variability of peak water levels due to the tidal effect is greater if the maximum flood discharge is smaller.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.1007-1019
• /
• 2015

The determination of the required seawall height is usually based on the combination of wind speed (or wave height) and still water level according to a specified return period, e.g., 50-year return period wind speed and 50-year return period still water level. In reality, the two variables are be partially correlated. This may be lead to over-design (costs) of seawall structures. The above-mentioned return period for the design of a seawall depends on economy, society and natural environment in the region. This means a specified risk level of overtopping or damage of a seawall structure is usually allowed. The aim of this paper is to present a conditional risk probability-based seawall height design method which incorporates the correlation of the two variables. For purposes of demonstration, the wind speeds and water levels collected from Jiangsu of China are analyzed. The results show this method can improve seawall height design accuracy.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.223-226
• /
• 1998

The control objective of steam generator water level in the secondary circuit of a nuclear power plant is to regulate the water level at the desired set point. The dynamics of steam generators is non-linear in nature. The task of modelling such plant is very difficult and especially so when plant operating conditions change frequently. In these reasons, conventional PI gains over all pover range will not work efficiently and a manual control is generally used in low power operation. Therefore the robust H$\infty$ controller design method should be required. In this paper, we design the robust H$\infty$ controller for water level control of steam generator using a mixed H$\infty$ optimization with model-matching method. Firstly we choose the desired model that has good disturbance rejection performance. Secondly we design a stabilizing controller to keep the model-matching error small and also provide sufficiently large stability margin against additive perturbations of the nominal plant.

• 수산해양교육연구
• /
• 제25권1호
• /
• pp.1-11
• /
• 2013

The aim of this study was estimated the characteristics of the wave propagation by the water level conditions using a numerical modeling method at the Wando sea area. For three cases numerical simulation on the condition of incident and incoming of the deepwater design wave and the season normal wave, the spatial distribution of the incident wave at study area were investigated. And the calculated numerical modeling results were compared with measured field wave data. According to on-site wave data measured for 18 days, the range of the significant wave height and period were 0.10~1.14 m, 4.35~8.74 sec, respectively, and the maximum wave height were 0.15~1.66 m. From the results of numerical model for offshore design wave incident, the wave height attacked from Southern-East direction at this study area were over maximum 10.5 m because of rapidly change of water depth. Numerical modeling by three water level conditions of Approxmate Lowest Low Water Level(Approx. L.L.W), Mean Sea Level(M.S.L) and Approximate Highest High Water Level(Approx. H.H.W) were practiced. From the results for the case of Approx. H.W.L, variations of wave height at the back area of islands were about 1.6 m at maximum value for the case of deepwater design wave incoming. The significant wave heights of winter season were bigger than summer under normal wave condition, the incident wave height over 5.5 m decreased by shielding effect of islands. The change of maximum wave height at summer season were distinct than winter and was about 1.2 m and 0.8 m, respectively.

• 한국산학기술학회논문지
• /
• 제17권4호
• /
• pp.464-473
• /
• 2016

이산화탄소의 배출 증가와 지구온난화, 엘리뇨 현상, 라니냐 현상 등과 같은 이상기후 현상의 발생빈도 증가로 인하여 전 세계적으로 내륙과 해안의 온도가 상승하고 있다. 지구온난화로 인한 바닷물의 열팽창 그리고 빙하의 해빙 등으로 인한 지구의 해수면은 매년 2.0mm/yr(전 세계 평균값)의 속도로 상승하고 있다. 그러나 해안에 인접한 수리구조물 혹은 해안 수리구조물을 설계할 시 기준이 되는 설계조위는 과거 관측된 조위 값으로부터 4대 분조 및 조화상수를 분석하거나 수치모형 실험에 의해 결정된다. 따라서, 설계조위는 구조물의 설계빈도에 상응하는 해수면의 상승속도를 감안해야 할 필요가 있다고 사료된다. 본 연구에서는 국립해양조사원(Korea Hydrographic and Oceanographic Administration; KHOA)에서 운영하고 있는 46개소의 조위관측소를 대상으로 관측개시일부터 2015년까지 시단위로 조위자료를 수집하였다. 우리나라를 크게 남해동부, 남해서부, 동해남부, 동해중부, 서해남부, 서해중부, 제주로 총 7개의 해역으로 구분하여 월별, 연별 변동추이 및 연평균 상승률 분석을 수행하였다. 향후 국지적 해수면상승의 원인규명 및 설계조위 고려 시 기초자료로 활용가능 할 것으로 판단된다.

• 한국지반공학회논문집
• /
• 제30권4호
• /
• pp.81-92
• /
• 2014

하천제방 건전도 평가는 하천설계기준 해설(2009), 구조물기초 설계기준 해설(2009) 등 관련 기준을 토대로 한계동수경사법, 한계유속법 등에 의한 파이핑 안전성과 제내지 및 제외지의 활동안전성 평가에 의하여 수행된다. 이때 수위파형은 건전도 평가 시 가장 중요한 설계입력자료이나 관련 국가기준에서 그 결정방법을 제시하지 못함으로서 부정확한 설계가 이루어지고 있다. 본 논문에서는 낙동강 문산제를 대상으로 평수위 상승, 홍수위 지속, 수위하강, 홍수빈도 등 개별 수위파형을 변화시켜가면서 제방 안정성에 미치는 영향 정도와 합리적인 수위파형특성을 제안하였다. 평가결과, 문산제 조립토 제방의 설계수위파형은 최대 57시간 이상의 평수위상승시간 및 53시간 이상의 홍수위지속시간 등을 반영할 것을 제안하였다.

• 물과 미래
• /
• 제18권3호
• /
• pp.202-207
• /
• 1985

• 한국연안방재학회지
• /
• 제4권3호
• /
• pp.119-131
• /
• 2017

Global warming under the influence of climate change and its direct impact on glacial and sea level are known issue. However, there is a lack of research on an indirect impact of climate change such as coastal structure design which is mainly based on a frequency analysis of water level under the stationary assumption, meaning that maximum sea level will not vary significantly over time. In general, stationary assumption does not hold and may not be valid under a changing climate. Therefore, this study aims to develop a novel approach to explore possible distributional changes in annual maximum sea levels (AMSLs) and provide the estimate of design water level for coastal structures using a multiple non-crossing quantile regression based nonstationary frequency analysis within a Bayesian framework. In this study, 20 tide gauge stations, where more than 30 years of hourly records are available, are considered. First, the possible distributional changes in the AMSLs are explored, focusing on the change in the scale and location parameter of the probability distributions. The most of the AMSLs are found to be upward-convergent/divergent pattern in the distribution, and the significance test on distributional changes is then performed. In this study, we confirm that a stationary assumption under the current climate characteristic may lead to underestimation of the design sea level, which results in increase in the failure risk in coastal structures. A detailed discussion on the role of the distribution changes for design water level is provided.

• 상하수도학회지
• /
• 제19권2호
• /
• pp.181-192
• /
• 2005

This study evaluated the effect of factors influencing the initial biofilm formation in drinking water distribution pipe by running experiments using a $2^{4-1}$ fractional factorial experimental design with a replicate. Important variables used for assessing biofilm formation included BDOC(biodegradable dissolved organic carbon), viable heterotrophic bacteria present in drinking water, water temperature, and shear stress at two levels each. Based on the statistical analysis of biofilm levels measured as attached HPC(heterotrophic plate count) and community-level assay, the main factors that have significant effects on biofilm formation were found to be viable heterotrophic bacteria and BDOC. Water temperature only exhibited significant effect on the levels of attached HPC, while shear stress was not a significant factor under given conditions. Moreover, the statistical analysis revealed that interactions between the important variables were not statistically significant at a 0.05 significance level.