• 한국지능시스템학회논문지
• /
• 제7권5호
• /
• pp.14-20
• /
• 1997

This paper proposes a new design method for the SMC-type FLC and shows that a SMC-type LFC is an extension of the SMC with BL. The conventional SMC-type FLC uses error and change-of-error as inputs of the FLC and generates the absolute value of a switching magnitude. Then, the fuzzy rule table is constructed on a two-dimensional space of the phase plane and has commonly the skew symmetric property. In this paper, we introduce a new variable, signed distance, from the skew symmetric property of the rule table. And thd variable becomes only a fuzzy variable that is used to generate the control input of a SMC-type FLC. that is, we design a new SMC-type FLC that uses a signed distance and a control input as the variables representing the contents of the rule-antecedent and the rule-con-sequent, respectively. Then the number of total rules is reduced and the control performance is almost the same as that of the conventional SMC-type FLC. Additionally, we derive the control law of the ordinary SMC with BL from a new SMC-type FLC. Namely, we show that a FLC is an extension of the SMC with BL.

• 한국기계가공학회지
• /
• 제20권5호
• /
• pp.85-95
• /
• 2021

Structure design sensitivity was evaluated using the orthogonal array experimental method for passive-type deck support frame (DSF) developed for float-over installation of the offshore plant. Moreover, approximation characteristics were also reviewed based on various meta-models. The minimum weight design of the DSF is significantly important for securing both maneuvering performance and buoyancy of a ship equipped with the DSF and guaranteeing structural design safety. The performance strength of the passive type DSF was evaluated through structure analysis based on the finite element method. The thickness of main structure members was applied to design factors, and output responses were considered structure weight and strength performances. Quantitative effects on the output responses for each design factor were evaluated using the orthogonal array experimental method and analysis of variance. The optimum design case was also identified from the orthogonal array experiment results. Various meta-models, such as Chebyshev orthogonal polynomial, Kriging, response surface method, and radial basis function-based neural network, were generated from the orthogonal array experiment results. The results of the orthogonal array experiment were validated using the meta-modeling results. It was found that the radial basis function-based neural network among the meta-models could approximate the design space of the passive type DSF with the highest accuracy.

• 한국의상디자인학회지
• /
• 제5권1호
• /
• pp.85-88
• /
• 2003

In order to design a good ready-made cloth, it is important to consider not only body size but also morphological factor. However, most dissatisfaction of customer is focusing on the size of ready-made cloth which is graded with elements of body size. Various researches on body type have been doing but the study on part of body type is insufficient compared to the study on whole body type. The objective of this paper is to provide relationship of shoulder angle between value in pattern and real measured value after analysis and comparison with these two values.

• 태양에너지
• /
• 제20권2호
• /
• pp.67-73
• /
• 2000

This study represents the methodology of performance prediction for small hydro power(SHP) sites. Nine tunnel type SHP sites with diversion dam were selected and the performance characteristics were analyzed by using a developed model. Also, primary design specifications such as design flowrate, plant capacity, and operational rate were suggested and feasibility for tunnel-type SHP sites were estimated. It was found that the design flowrate was most important parameter to exploit SHP plant and the methodology developed in this study was useful tool to analyze the performance of SHP sites.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.455-462
• /
• 2000

The characteristic of “Korea LRT Carbody” is designed by using AED(All Extrusion Design) method. This is developed in Europe and be introduced in this paper minutely. The window type of “Korea LTR” has no supported frame, so the passengers ensure the outside view widely. The passenger's door will designed by plug type - This is the first time in Korea. In this report we have an object to the strength analysis for the carbody design. For the purpose of safety and lightening, we are going to research the section of thickness through optimization design.

• 복식
• /
• 제63권1호
• /
• pp.147-160
• /
• 2013

Korean fashion designs became important items in Korea in the middle of the 1980s, and it has advanced into the world market in the early part of the 1990s. To achieve success in global fashion world, it is necessary to analyze Korean fashion design thoroughly and prepare strategies to develop designs with mainstream acceptance in the global fashion world. The purpose of this study is to analyze the aesthetic characteristics and Korean beauties of Korean fashion designs. Fashion photos of Korean fashion designs from 2006 S/S to 2012 F/W were analyzed. 357 designs from 608 designs of 4 representative Korean designers were examined and design characteristics, expression styles were studied. The major conclusions of the study are as follows : 1. H Line, slim, fitted silhouette and loose look were applied. 2. 5 major traditional colors, red, blue, yellow, white and black colors were used. Brown color, neutral color, golden color and beige color of the textile material's original color were used. Traditional textile materials like ramie fabric, satin and cotton, wool and metallic fabric were used. 3. Patterns of flower, traditional pattern and Korean letters were applied. Embroidery, patchwork and mother-of-pearl were decorated. 4. The three types of beauty were natural beauty, moderate beauty and decorative beauty. The types that were analyzed were realistic expression type, moderate expression type, image expression type and mixed expression type. To be accepted in global fashion world, Korean traditional design elements should be modified, broken down and reorganized so that Korean fashion design can be recreated.

• 한국실내디자인학회논문집
• /
• 제25권3호
• /
• pp.70-81
• /
• 2016

Nowadays the preschool children spend much of the day playing indoors. Therefore, it needs the indoor environment that helps a variety of fun activities and physical development, and it requires the space configuration and playable furniture considering the emotional development for mental health. However, the furniture for fast growing preschoolers has not various types because the domestic furniture market for children is mostly baby beds and the furniture for the education of children. Therefore, this study presents the concepts and types of the playable furniture reflecting emotional design for preschool children's healthy emotion and suggests the most appropriate type of playable furniture considering play behavior by age. In this study, we investigated the physical, cognitive, social, emotional and linguistic development characteristics and play behavior of preschoolers, and derived the right type of playground equipment and furniture, and examined the types of playable furniture to help the emotional development. We derived the items to be checked for developing the playable furniture by age for emotional development, and classified preschoolers' playable furniture into the use of learning, relaxation and storage, and suggested its basic type focusing on the cases of various playable furniture developed at home and abroad. As a result, the playable furniture was divided into three types. The first is the self-play type making possible self amusement, the second is module built-up-type that consists of furniture and modules or units and creates various patterns and can be modified through the self-assembly and disassembly, and the third is IT game type grafting IT skills and a variety of electronic games to furniture. We sorted these types into three classes (1-3 years old, 4-5, 6-7) according to age and presented the type of play for each age, the play element and representative image that can be introduced to this furniture. In this study, we provided the basic design types of age-specific emotional playable furniture by analyzing these results.

• International Journal of Advanced Culture Technology
• /
• 제6권3호
• /
• pp.129-141
• /
• 2018

As the scope of social expectations and roles in the design field has expanded, the demand for education to cope with changes in the technology environment is increasing in design education. In response to this trend, microcontroller board-type design-prototyping tools have also been introduced into design education, and much educational content is being developed. However, there is the perception that students who are majoring in design without engineering knowledge are still barred from entry. A variety of educational content and tools have been developed to solve these difficulties, although there are several limitations to their practical application. Especially, in the design education courses in universities, the functional expectation level for prototyping is high, but most of the content developed for solving the difficulties has been developed for the lower education levels, and it could be said that a great deal of learning is necessary to solve the problem. In this study, students were asked about microcontroller board utilization and their satisfaction with their design through questionnaires and with the developed microcontroller board development direction via Focus Group Interviews. Based on this, we tested microcontroller boards that eliminate the coding process and which students can use to create and prototype their work as a suggestion to fulfil demand. After using the board, both the usability and improvement of the product were checked. Confirmation of the usefulness of the free- coding-type microcontroller was obtained through this study along with the possibility of responding to various educational demands by applying the application design related to this product.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권1호
• /
• pp.49-58
• /
• 1997

The membrane type LNG tank is non self-supporting tank which consists of both primary and secondary membrane supported through the insulation boxes by the adjacent hull struc¬ture. Although the membranes are not structural member. They are subject to periodical cyclic loads due to the thermal expansion and other expansions or contraction of membrane. At the design stage of the tank, an analytical and experimental approach on the fatigue strengths of membrane and its welds is necessary in order to assist the designer and the inpector. In this study the evaluation method of fatigue strength of membrane type LNG tank is pre¬sented with FEM analysis and fatigue test of lap welds and it contains the following:1) The fatigue tests and preparation of design S - N curve for lap welds 2) FEM analysis of test specimens 3) Estimation of cumulative damage factor of lap welds 4) Guideline for inspection of lap welds of membrane type LNG tank As the results of analytical and experimental approaches in this study, the evaluation method of fatigue strengths of membrane type LNG tank is proposed, which is expected to be useful for design and inspection of membrane type LNG tank.

• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.15-23
• /
• 1999

With a remarkable expansion of communication industry, a pager or a cellular phone becomes a necessary communication device in modern society. However, a paging signal by a buzzer is often acted as an unpleasant noise in some places, thus necessitating a paging signal by a vibration motor. In this paper, a simpler type of a vibration motor, a coreless permanent magnet(PM) DC motor, is considered to substitute for the conventional vibration motors. Using an analytical method, electromagnetic field and operating torque were calculated for the given inner and outer PM type motors, and the results were confirmed by FEM analysis. As design parameters, number of PM poles, PM radial thickness, coil arc angle and number of winding stacks were chosen for sensitivity analysis. It shows that coil arc angle is the most important design parameter to increase the motor performance, without giving an adverse effect on motor weight, size and manufacturing cost. Based on the analysis of the outer PM type motor, an outer square PM type motor is proposed as the final design. Compared to the outer PM type, outer square type provides more flexibility to attach to the small size cellular phones. With the optimum design of square outer PM DC motor, it can successfully substitute the conventional types with less expensive manufacturing cost. better performance and smaller necessary space.