• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2492-2494
• /
• 2000

Design of Fuzzy cotroller consists of intuition of human expert, and any other information about how to control system. If the rules adequately control the system, the design work is done well. If the rules are inadequate, the designer must modify the rules. Through this procedure, the system can be controlled. In this paper, we designed simply a fuzzy controller based on human knowledge, but it has errors showing some vibrations. So we updated the optimal parameters of fuzzy controller using Neural Network algorithm.

• 한국항해학회지
• /
• 제20권2호
• /
• pp.77-84
• /
• 1996

This is the first report about the development of INMARSAT-C Satellite communication terminal. We analyze the existing Inmarsat-C terminal and examine each rules(IMO rule, domestic rules) about terminal. With that result, we design the basic hardware and software of terminal. This report consists of ; 1) the contents of the overall of operating situation and resources of INMARSAT-C system as like operation of communication system, communication channels and services 2) the contents of the specification of Inmarsat-C terminal hardware and software and the rules of IMO and Type approval 3) the design of basic hardware and reserch of signal modulation/demodulation using Viterbi algorithm 4) the design of software algorithms and functions focused in korean situations.

• 스마트미디어저널
• /
• 제5권1호
• /
• pp.104-113
• /
• 2016

본 논문은 쌓임 규칙에 기반한 복합기능을 가진 풀다운메뉴의 새로운 설계 방법을 제안한다. 기존의 웹 내비게이션 관련 연구에서는 디자인적인 측면을 강조한 내용이 대부분이다. 본 논문은 프로그래밍기법에 주안점을 둔 기술적인 측면을 고려하여 다수의 엘리먼트로 풀다운메뉴의 메인메뉴를 구성하고, 이들을 쌓임 규칙을 이용하여 서로 다른 레이어에 배치함으로써 메인메뉴의 기본적인 분류기능 이외에 독립적으로 고유의 기능을 할 수 있다. 또한 본 논문에서 제안한 애니메이션기법을 사용한 서브메뉴 선택 바와 서브메뉴 항목 자동 탐색 기능을 추가하여 시각적인 효과와 정보탐색 효율을 향상할 수 있다. 본 논문에서 제안한 복합기능을 갖는 풀다운메뉴를 CSS와 jQuery를 사용하여 구현함으로써 제안한 방법의 유효성을 확인하였다.

• 한국정보처리학회논문지
• /
• 제6권8호
• /
• pp.2072-2087
• /
• 1999

소프트웨어의 대형화와 사용자 요구사항의 복잡화에 따라, 소프트웨어 개발 초기 단계에서의 산출물의 정확성과 일관성은 중요해지고 있다. 하지만, 객체지향 방법을 기반으로 한 설계 문서에 대한 오류 검출 및 일관성 점검을 위한 기법은 만족할 만한 수준에 이르지 못하고 있다. 본 논문은 UML(Unified Modeling Language)의 다이어그램들에 대한 메타모델을 작성하고, 메타모델의 각 요소들에 대하여 적용할 일반화된 메타규칙을 도출하고, 메타규칙들을 각 다이어그램에 적용한 세부규칙 도출에 활용하였다. 이 방법은 오류 검출과 일관성 점검에 활용할 세부규칙들을 체계적으로 도출하므로, 규칙의 완전성을 도모하고 규칙적용의 자동화를 가능하게 하였다. 또한, 도출된 세부규칙을 적용한 사례를 통하여 그 효용성을 확인하였다.

• 한국실내디자인학회논문집
• /
• 제26호
• /
• pp.95-103
• /
• 2001

This study was performed to search for the geometrical principles in modern architecture and design based on Frobel's educational idea and Kindergarten system. Especially, it studies on the geometrical principles of Froebel's building gifts and it's types, and then illustrates applied examples in modern architecture and design. As the architectural scope, the architecture and design theory of Frank Lloyd Wright and Bauhaus in early 20th century is analyzed. The conclusions of this study that starts these purpose are as follows. First, Froebel's educational theory is based on principles and rules which are perceived through the observation of nature, and Froebel's Kindergarten system consists of geometrical building gifts and categories of geometrical forms. Second, the characteristics of Froebel's building gifts are mathematical size, proportion, symmetry and the rules of spatial relation. Third, the influence of Froebel's kindergarten system on Bauhaus is that it based on the rational rules of $\bigtriangleup\square\bigcirc$ organized by geometrical basic forms as like Froebel's educational idea. And the influence of Froebel's Kindergarten system on Frank Lloyd Wright is that he used unit system, unity of space and structure and modular system as like the Froebel's building gifts.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.774-777
• /
• 2001

This paper describes a research work of developing a computer-aided design system of cold forging products. An approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plastic theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoCAD with a personal computer and is composed of six modules, which are selection of billet material, input of final product, process planning design, preform modification, insert design, shrink rings design module. Based on knowledge-based rules, the system is designed by considering several factors such as volume constancy, limite of formability by material, preform shape and so on.

• 대한인간공학회지
• /
• 제25권2호
• /
• pp.125-134
• /
• 2006

Most users learn new, complex systems through trial-and-error experience rather than referring to the manuals in a cognitive process that is called 'exploratory learning'. While exploring a system, people find prototypical rules for using the system based especially on frequent tasks. The rules are formed from consistent task procedures and well-expected interface elements on the designed system. These rules play the role of the basis of users' knowledge for performing tasks. The decision making to select and apply those rules interacting with an interface can be aided by properly provided hints on the interface. With appropriate hints, users can learn new systems easily and use them with reduced usability problems. This paper first reports an observation of user behavior performing tasks with prototypical interaction rules and finds a sound set of criteria to extract prototypical interaction rules systematically. Two types of hints are defined. Extending hints prompt users to apply prototypical interaction rules beyond well-known tasks. Preventive hints guide users out of possible capture errors by drawing attention to the variation of rules. A systematic and practical method is proposed to identify the opportunities for both types in designing interfaces. It is then verified through a usability test that the proposed method is effective in identifying the locations and types of appropriate hints to reduce or mitigate usability problems.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.38-47
• /
• 2001

This paper decribes the development of computer-aided design of a very precise progressice die for lead frame of semiconductor chip. The approach to the system is based on knowledgr-based rules. Knowledge of fie이 experts. This system has been written in AutoLISP using AutoCAD ona personal computer and the I-DEAS drafting programming Language on the I-DEAS mater series drafting with on HP9000/715(64) workstation. Data exchange between AutoCAD and I-DEAS master series drafting is accomplished using DXF(drawing exchange format) and IGES(initial graphics exchange specification) files. This system is composed of six main modules, which are input and shape treatment, production feasibility check, strip layout, data conversion, die layout, and post processing modules. Based on Knowledge-based rules, the system considers several factors, such as V-notches, dimple, pad chamfer, spank, cavity punch, camber, coined area, cross bow, material and thickness of product, complexities of blank geometry and punch profiles, specifications of available presses, and the availability of standard parts. As forming processes and the die design system using 2D geometry recognition are integrated with the technology of process planning, die design, and CAE analysis, the standardization of die part for lead frames requiting a high precision process is possible. The die layout drawing generated by the die layout module s displayed in graphic form. The developed system makes it possible to design and manufacture lead frame of a semiconductor more efficiently.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.132-135
• /
• 2000

A process design expert system for rotationally symmetric deep drawing products has been developed The application of the expert system to non-axisymmetric components, however, has not been reported yet. Thus, in this present study, the expert system for non-axisymmetric deep drawing products with elliptical shape was constructed by using process sequence design. The system developed in this work consists of four modules. The first one is a recognition of shape module to recognize non-axisymmetric products. The second one is three dimensional (3-D) modeling module to calculate the surface area for non-axisymmetric products. The third one is a blank design module to create an oval-shaped blank with the identical surface area. The forth one is a process planning module based on the production rules that play the best important role in an expert system for manufacturing. The production rules are generated and upgraded by interviewing with field engineers.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.85-89
• /
• 2004

The paper presents a summary of the multidisciplinary/optimization method for the preliminary design of container feeder vessel. The current scenario in the ship building industry highly focuses on container ship design and construction proving the inherent demand in maritime industry. The design accomplishes the outer circle of the design spiral giving stress in areas of Hull Form Design, Resistance & Propulsion. Empirical relations, model test results, data from built ships, class rules and latest market demands stood as the criteria for the design. Optimization of the design as per the owners requirement. class rules, and the trade route selected are the major challenges met with. Strength. reliability, structural safety and stability have been incorporated in compromising standards.