• KIEAE Journal
• /
• 제10권6호
• /
• pp.105-114
• /
• 2010

As children are known to touch and chew everything, green cleaning procedures are an important step in preventing children from ingesting harmful toxins. The objectives of this study are to develop a new, self-evaluation checklist and to suggest design recommendations which comply with easy, adaptable, economical ways to improve the eco-friendly indoor environment of Korean childcare facilities. The information compiled during this study was collected through literature review and internet surveys1) from July, 2009 to February, 2010. The results of this study show that the current Korean childcare accreditation system and practices emphasize clean building interiors, policies for sanitation and cleanliness, and control of humidity and lighting. On the other hand, the information provided by green-building rating systems from GBCC, LEED, and GBTool offers additional and comparative details regarding indoor environment quality and standards regarding the IAQ performance and management plan, ventilation and thermal comfort systems, views from windows, acoustics, and lighting. In conclusion, this document provides an appropriate and easy-to-follow, self-evaluation checklist composed of eight criteria and 51 practical items. This study also provides the design recommendations composed of 27 practical ideas focusing on interior elements. Both the checklist and design recommendations I have suggested can be a post-occupancy tool for evaluating eco-healthy facility standards as well as tips for continuing to maintain eco-healthy childcare facilities.

• Steel and Composite Structures
• /
• 제2권6호
• /
• pp.411-428
• /
• 2002

Non-linear large-displacement elasto-plastic finite element analyses are used to propose design recommendations for the eaves bracket of a cold-formed steel portal frame. Owing to the thinness of the sheet steel used for the brackets, such a structural design problem is not trivial as the brackets need to be designed against failure through buckling; without availability of the finite element method, expensive laboratory testing would therefore be required. In this paper, the finite element method is firstly used to predict the plastic moment capacity of the eaves bracket. Parametric studies are then used to propose design recommendations for the eaves bracket against two potential buckling modes of failure: (1) buckling of the stiffened free-edge into one-half sine wave, (2) local plate buckling of the exposed triangular bracket area.The results of full-scale laboratory tests on selected geometries of eaves bracket demonstrate that the proposed design recommendations are conservative. The use of the finite element method in this way exploits modern computational techniques for an otherwise difficult structural design problem.

• 대한인간공학회지
• /
• 제22권3호
• /
• pp.93-111
• /
• 2003

This research extends a general theory of cognition to address cognitive constraints on complex command production and allows us to make system design recommendations. The research described in this paper addresses the cognitive origins of problems user have producing sequence-dependent command strings while interacting with the UNIX operating system. We describe an empirical and theoretical analysis of user difficulties, and then show how our analyses lead to design recommendations. In addition, we summarize results from testing the impact of our design recommendations on system usability

• Industrial Engineering and Management Systems
• /
• 제10권4호
• /
• pp.288-291
• /
• 2011

Recommendations for older driver-friendly automobile interior design have been determined by taking into account older people's physical and cognitive characteristics. Twenty three older people (aged from 54 to 78) and five younger people (from 20 to 29) performed several tasks in actual driving conditions, in which their reaction times and performance errors were recorded. Some design factors were found to be related to older drivers' visibility and controllability. Several design recommendations were proposed in terms of cluster color and font, display location, and HVAC control type. Proposed recommendations are expected to satisfy a wider range of older drivers as these will facilitate automobile interior designs which are fitter to older drivers' visual, cognitive, and manual capabilities.

• 한국항공운항학회지
• /
• 제9권1호
• /
• pp.31-44
• /
• 2001

This paper addresses legislation status of air route design standard of Korea. Korea Ministry of Construction and Transportation's Order Number 300 (March 28, 2001) prescribes that firstly, the design of air routes in Korea should be in accord with International Civil Aviation Organization(ICAO)'s recommendations published in Annex 11: Air Traffic Service and Procedures for Air Navigation Services: Aircraft Operations (ICAO Doc 8168-OPS, 1986), and secondly, United States Federal Aviation Administration(FAA)'s Terminal Instrument Procedures (FAA, 1976). An investigation on the current air route specifications of Korea reveals that they are in accord with neither ICAO's recommendations nor FAA's standards in that the width of Korea's air routes are narrower that the international recommendations and standards. As a member state of ICAO, it is imperative for Korea to follow the international standards. In that purposes, Korea should legislate and regulate the detail standard for air route design. For the legislation, FAA regulations are to be followed because FAA rules contains more detail specifications while ICAO recommendations includes allows a range of policy decisions, which may result in a confusion in practice.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2002년도 봄 학술발표회 논문집
• /
• pp.138-139
• /
• 2002

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.63-70
• /
• 2005

For using narrow site effectively, recently constructions of high-rise buildings have been increased. High-rise buildings are mainly governed by wind loads. Since wind flow Is vaned irregularly, the experimental method such as wind tunnel test is used to evaluate real wind loads. In this study, it is intended to estimate design wind pressure and amounts of material of cladding by AIK recommendations and wind tunnel test. Also, this study includes the investigation of reliability, suitability and economical efficiency in design of cladding of buildings by AIK recommendations and wind tunnel test by comparing and examining various results. Finally, it is concluded that not only AIK recommendations but also wind tunnel test should be considered to get the reasonable wind pressure acting on the cladding of high-rise buildings.

• Structural Engineering and Mechanics
• /
• 제9권3호
• /
• pp.257-268
• /
• 2000

The seismic design recommendations of the Jordan Code for Loads and Forces (JC) are evaluated, based on comparisons with analytical studies and the Uniform Building Code. It was established that the overall safety ensured by the implementation of these recommendations is not consistent with the established seismic risk in Jordan and the intended objectives of the code. A new zoning map is proposed with effective peak ground acceleration values. The different period formulae of the code were studied and were found to grossly underestimate the fundamental period when compared with analytically derived values or other codes' formulae. Other factors including the dynamic, soil, importance and behavior factors are discussed. It was determined that the JC's lateral load distribution formulae clearly lead to smaller internal forces than both dynamic analysis and UBC loads, even when those loads are normalized to give the same base shear. The main reason for this is attributed to the limited allowance for a backlash force in the JC.

• 대한인간공학회지
• /
• 제26권3호
• /
• pp.111-115
• /
• 2007

Design equations for anthropometric product design are developed by considering the geometrical relationships of design dimensions and anthropometric dimensions. The present study applied the design structure matrix (DSM) method to the development of design equations for a computer workstation, and compared design values from the design equations with corresponding design values of ergonomic recommendations and existing products. The relationships between design dimensions (e.g., legroom and worktable) were analyzed by a DSM, and then the application order of design equations (e.g., seatpan, backrest, armrest, legroom, and worktable in descending order) was determined. Next, design equations were developed by analyzing the geometric relationships between computer workstation design dimensions and anthropometric dimensions. Finally, design values for a computer workstation were determined by considering a standard posture defined and representative human models (5th, 50th, 95th %ile). The design values calculated using the design equations were similar with those of ergonomic recommendations found in literature and two commercial products measured in the study; however, some design values (e.g., seatpan height) were different due to discrepancy in standard posture. The DSM method would be utilized to systematically analyze the relationships between design dimensions for anthropometric product design.

• 한국실내디자인학회논문집
• /
• 제3호
• /
• pp.64-70
• /
• 1994

The objective of this study is to provide recommendations for the interir design of motor showroom as a sales policy. ten cases of motor showrooms were selected from already observed 50 showrooms in Seoul area. findings revealed that the car industries of Korea should meet the strong needs of differentiated sales policy, and the showroom design was an important factor which influenced client's pruchasing power. From these findings and analyses, this study suggests that each brand has to represent the typical total image to appeal to the consumer strongly . Additionally each showroom should be flexible in modification to meet the diverse conditions such as the location, required function and the trend of consumers. In conclusion , researchers provided 6 types of recommendations in terms of floor plan and interior elements such as circulation path, moduled furniture and objects color and lighting variation . Hopely, this research provides more functional and comfortable environment of automobile showrooms for consumers and companies.