• 제목/요약/키워드: Design pattern

검색결과 5,536건 처리시간 0.035초

각막형상과 난시도에 따른 구면 RGP 렌즈와 비구면 RGP 렌즈의 플루레신 염색 패턴 비교 (The Comparison of Fluorescein Patterns between Spherical RGP Lens and Aspherical RGP Lens by Corneal Type and Astigmatic Degree)

  • 박은혜;김소라;박미정
    • 한국안광학회지
    • /
    • 제17권1호
    • /
    • pp.37-45
    • /
    • 2012
  • 목적: 구면 RGP 렌즈 및 비구면 RGP 렌즈를 양호하게 피팅할 때 중심부와 주변부의 플루레신 염색 면적이 난시도 및 각막형상에 따라 어떻게 달라지는 지를 비교하여 렌즈와 각막과의 정렬상태가 렌즈의 디자인에 따라 어떠한 차이가 있는지를 알아보고자 하였다. 방법: 직난시를 가진 19~30세($25.12{\pm}3.52$세)의 90안을 대상으로 구면 및 비구면 RGP 렌즈를 착용시키고 플루레신 염색 패턴을 분석하였으며, 이의 정량적인 평가를 위하여 중심부와 주변부의 면적을 계산하여 비교하였다. 결과: 양호한 피팅이 되는 렌즈의 베이스커브가 구면 RGP 렌즈와 비구면 RGP 렌즈가 동일한 경우는 72%에 달하였으나, 대칭나비형 각막과 높은 난시도를 가진 경우에는 동일한 베이스커브에서 구면 RGP 렌즈와 비구면 RGP 렌즈가 양호한 피팅이 될 가능성이 적어졌다. 양호하게 피팅된 비구면 RGP 렌즈의 주변부 플루레신 염색 면적은 구면 RGP 렌즈보다 더 작았으며, 두 디자인의 렌즈 모두 난시가 심해질수록 주변부 면적은 감소하였고 원형 각막보다도 대칭 나비형 각막에서의 주변부 면적이 더 작았다. 동일한 난시도의 각막에서는 두 각막 형상 모두에서 양호하게 피팅된 비구면 RGP 렌즈의 주변부 플루레신 염색 면적이 더 작았다. 결론: 본 연구를 통하여 RGP 렌즈의 각막과의 정렬상태의 달라지는 정도가 렌즈 디자인, 각막의 난시도, 각막 형상에 의해 차이가 있음을 알 수 있었다. 따라서 렌즈 디자인과 각막의 정렬상태의 정량적인 고찰을 통한 본 연구결과는 RGP 렌즈의 피팅 가이드라인 설정, 적합한 디자인 개발, 부분별 누액양에 대한 기초자료로 사용될 수 있을 것이다.

실시간 신호제어를 위한 신경망 적용 지체최소화 주기길이 설계모형 개발 (Development of Neural Network Based Cycle Length Design Model Minimizing Delay for Traffic Responsive Control)

  • 이정윤;김진태;장명순
    • 대한교통학회지
    • /
    • 제22권3호
    • /
    • pp.145-157
    • /
    • 2004
  • 국내 실시간 신호제어시스템은 주요교차로의 검지체계에서 산출되는 포화도 정보 및 실시간 신호운영자료를 토대로 차기 주기길이를 설계하고 있다. 이러한 국내 실시간 신호제어시스템의 주기길이 설계모형에 의해 설계되는 차기주기길이는 교통량이 증가하면 주기길이도 증가한다는 주기길이 결정 기본원리를 따르고 있으나 해당 주기길이 설계모형으로 결정되는 주기길이가 과연 지체최소화 주기인지 검토가 요구된다. 또한 국내 실시간 신호제어시스템의 주기길이 설계모형에는 운영자 결정 변수가 있어 차기 주기길이 설계가 비효율적일 수 있으므로 운영자 결정 변수를 제외한 주기길이 설계모형 개발이 필요하다. 이에 본 연구에서는 (1)국내 실시간 신호제어시스템의 주기길이 설계모형을 검토하고, (2)운영자 결정변수를 제외한 주기길이 설계모형을 개발한다. 국내 실시간신호제어시스템의 주기길이 설계모형을 검토한 결과 (1)교차로의 운영상태가 비포화일 경우 지체최소화 주기보다 큰 주기길이를 설계하는 것으로 검토되었고, (2)교차로의 현재 신호주기가 90초 이상일 경우 목적 운영포화도(Target operational volume-to-capacity ratio)가 0.90을 유지하는 반면 신호주기가 90초 미만일 경우 목적운영포화도가 0.90보다 작아지는 것으로 검토되었다. 본 연구는 이러한 점을 고려, 신경망을 이용하여 운영자 결정변수를 제외한 국내 실시간 신호제어시스템을 위한 지체 최소화 주기길이 설계 모형을 개발하였다. 모형 검증결과 본 연구에서 개발된 신경망 모형은 국내 실시간 신호 제어시스템과는 달리 지체최소화 주기길이와 유사한 패턴으로 주기길이를 설계한다는 결과를 도출하였다.택배서비스시장도 성장한 것으로 나타났다. 특히 정부주도에 의한 정보화추진이 전자상거래를 촉진시켜 택배서비스시장에 영향을 미친 것으로 분석되었다.수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수

수중 무선 전화기의 설계 - 수중무선전화기 설계를 위한 수중소음분석을 중심으로- (The Design of Wireless Underwater Telephone -Analysis of Underwater Background Noise for Wireless Underwater Telephone Design -)

  • 박문갑;윤갑동;김석제;윤종락
    • 수산해양기술연구
    • /
    • 제37권4호
    • /
    • pp.302-307
    • /
    • 2001
  • 본 연구는 잠수기 어업용 수중무선전화기를 설계하는데 있어 최적의 반송 주파수와 송신 신호의 음원 준위를 결정할 목적으로 우리 나라 잠수기 주 조업장의 하나인 거제와 통영 해역의 해양 배경소음과 조업중인 잠수기 어장의 수중 소음에 대하여 검토, 고찰한 결과를 요약하면 다음과 같다. 1. 거제와 통영의 잠수기 어장의 해양 배경 소음을 분석한 결과, 음압 준위는 25∼301kHz 부근에서 가장 낮아 52∼57dB이었고, 주변 통항 선박량과 산업시설이 많은 거제 해역이 통영 해역보다 약 5dB 더 높았다. 2. 거제와 통영의 잠수기 어선의 조업중의 수중소음을 비교하면, 최저 음압준위는 30kHz 부근에서 거제 어장에서는 67dB로서 통영의 62d묘보다 5dB 높은 음압 준위를 나타냈다. 이것은 거제 해역은 잠수기 어선의 규모도 통영 해역의 잠수기 어선보다 약간 크고, 분사기를 사용하여 작업하는데 비해 통영 해역은 잠수기 어선의 크기도 상대적으로 작고, 주 어획 대상물이 달라 분사기를 사용하지 않는 것이 그 원인으로 판단된다. 3. 거제 해역의 패류 채취용 분사기를 사용할 때의 수중 소음의 음압 준위는 102dB었다. 4. 거제 해역의 조업중에 대한 수중 배경 소음을 67dB라 가정할 때, 최대 500m까지 통화하기 위한 송신 신호의 음원 준위는 131dB 정도이다. 그러나, 통영 해역의 잠수기 조업은 분사기를 사용하지 않는 조업으로 이 경우 배경 소음은 약 62dB로서 송신 신호의 음원 준위는 126dB정도이다. 잠수기 조업중이 아닌 경우 즉, 스쿠버 다이버용 수중무선 전화기인 경우에는 배경 소음이 52∼57dB이므로 송신 신호의 음원 준위는 l16∼121dB이면 될 것으로 판단된다. 협동학습 모형이 수학 수업에 보다 발전적으로 널리 적용되기를 기대한다.cal results well visualized the streamlines, pressure fields, and speed vectors of a simple cambered and slot cambered otter board with slot size 0.02C. The slot cambered one with slot size 0.02C was shown that pressure field was distributed moderately on front and back side of otter board. And, the delay and decrease of separation were favorably achieved by flow through slot. 4. Computed result on the pattern of hydrodynamic field and the values of C/sub L/ and C/sub D/ by the commercial CFD code, FLUENT, show almost the same as those of the experimental result.erence was found in its fragrance. And, no difference was found in brightness and viscosity between samples. As a result of conducting the palatability test, no difference was showed in the appearance, but as for the overall palatability

  • PDF

반응표면분석법을 이용한 Leuconostoc mesenteroides SRCM201425의 만니톨 생산배지 최적화 (Optimization of Medium Components using Response Surface Methodology for Cost-effective Mannitol Production by Leuconostoc mesenteroides SRCM201425)

  • 하광수;신수진;정성엽;양호연;임수아;허주희;양희종;정도연
    • 생명과학회지
    • /
    • 제29권8호
    • /
    • pp.861-870
    • /
    • 2019
  • 본 연구에서는 경제성 있는 생물학적 만니톨 고생산을 위해 선별균주의 만니톨 생산 최적화 배지조성을 RSM 방법을 이용하여 확립하고자 하였다. 먼저 김치로부터 분리된 10균주의 만니톨 생산량과 과당으로부터 만니톨 전환율 분석을 통하여 SRCM201425 균주를 선발하였으며, 선발균주는 16S rRNA 유전자 염기서열과 당 발효 분석을 통하여 Leuconostoc mesenteroides로 동정하였다. Plackett-Burman design (PBD)을 이용하여 만니톨 생산에 영향을 주는 배지 인자를 선별하기 위해 총 11개의 탄소원, 질소원, 무기원소의 영향을 조사하였으며, 통계학적 분석을 통하여 최종적으로 fructose와 sucrose, peptone을 선정하였다. 만니톨 생산을 위한 선별된 각 변수의 최적 농도를 결정하기 위한 방법으로 central composite design (CCD)과 반응표면 분석법을 이용하였으며, 최종적으로 CCD를 통해 만니톨 생산을 위한 배지 조성의 최적 농도는 fructose 38.68 g/l, sucrose 30 g/l, peptone 39.67 g/l으로 예측되었으며, 통계학적 분석을 통해 실험모델의 적합성을 확인하였다. 최종적으로 MRS 배지에서의 생산량의 약 20배의 만니톨을 생산할 수 있었으며, 100 g/l의 fructose가 포함된 MRS 배지 대비 97.46%의 만니톨을 생산하면서, 산업화시 기존 배지 대비 생산비용을 크게 절감할 수 있을 것으로 예상되었다. 본 연구를 통하여 만니톨 생산을 위한 배지 조성의 최적화를 확립하였으며, 만니톨을 생산하기 위한 방법으로 주로 사용되고 있는 고비용의 촉매환원 방법을 대체할 방법을 제시할 수 있는 기초자료로 활용될 수 있을 것으로 기대된다.

조선왕조(朝鮮王朝) 왕릉(王陵) 문인석상(文人石像)의 복식형태(服飾形態)에 관한 연구 (A Study on the Costume Style of Civil Servants' Stone Images Erected at Tombs of the Kings for Yi-dynasty)

  • 권용옥
    • 복식
    • /
    • 제4권
    • /
    • pp.87-114
    • /
    • 1981
  • A costume reveals the social characteristics of the era in which it is worn, thus we can say that the history of change of the costume is the history of change of the living culture of the era. Since the Three States era, the costume structure of this country had been affected by the costume system of the China's historical dynasties in the form of the grant therefrom because of geographical conditions, which affection was conspicuous for the bureaucrat class, particularly including but not limited to the Kings' familities. Such a grant of the costume for the bureaucrat class (i.e., official uniform) was first given by the Dang-dynasty at the age of Queen Jinduck, the 28th of the Shilla-dynasty. Since then, the costume for the bureaucrats had consecutively been affected as the ages had gone from the unified Shilla, to the Koryo and to the Yi-dynasty. As the full costumes officially used by government officials (generally called "Baek Gwan") in the Yidynasty, there existed Jo-bok, Gong-bok and Sang-bok. Of such official costumes, Gong-bok was worn at the time of conducting official affairs of the dynasty, making a respectful visit for the expression of thanks or meeting diplomatic missions of foreign countries. It appears no study was made yet with regard to the Gong-bok while the studies on the Jo-bok and the Sangbok were made. Therefore, this article is, by rendering a study and research on the styles of costumes of civil servants' stone images erected at the Kings' tombs of the Yi-dynasty, to help the persons concerned understand the Gong-bok, one of the official costume for Baek Kwan of that age and further purports to specifically identify the styles and changes of the Gong-bok, worn by Baek Gwan during the Yi-dynasty, consisting of the Bok-doo (a hat, four angled and two storied with flat top), Po (gown), Dae (belt), and Hol (small and thin plate which was officially held by the government officials in hand, showing the courtesy to and writing brief memorandums before the King) and Hwa (shoes). For that purpose, I investigated by actually visiting the tombs of the Kings of the Yi-dynasty including the Geonwon-neung, the tomb of the first King Tae-jo and the You-neung, the tomb of the 27th King Soon-jong as well as the tombs of the lawful wives and concubines of various Kings, totalling 29 tombs and made reference to relevant books and records. Pursuant. to this study, of the 29 Kings' tombs the costume styles of civil servants' stone images erected at the 26 Kings' tombs are those of Gong-bok for Baek-gwan of the Yi-dynasty wearing Bok-doo as a hat and Ban-ryeong or Dan-ryenog Po as a gown with Dae, holding Hol in hand and wearing shoes. Other than those of the 26 tombs, the costume styles of the Ryu-neung, the tomb of the Moon-jo who was the first son of 23rd King Soon-jo and given the King's title after he died and of the You-neung, the tomb of the 27th King Soon-jong are those of Jobok with Yang-gwan (a sort of hat having stripes erected, which is different from the Bok-doo), and that of the Hong-neung, the tomb of the 26th King Go-jong shows an exceptional one wearing Yang-gwan and Ban-ryeong Po ; these costume styles other than Gongbok remain as the subject for further study. Gong-bok which is the costume style of civil servants' stone images of most of the Kings' tombs had not been changed in its basic structure for about 500 years of the Yi-dynasty and Koryo categorized by the class of officials pursuant to the color of Po and materials of Dae and Hol. Summary of this costume style follows: (1) Gwan-mo (hat). The Gwan-mo style of civil servants' stone images of the 26 Kings' tombs, other than Ryu-neung, Hong-neung and You-neung which have Yang-gwan, out of the 29 Kings' tombs of the Yi-dynasty reveals the Bok-doo with four angled top, having fore-part and back-part divided. Back part of the Bok-doo is double the fore-part in height. The expression of the Gak (wings of the Bokdoo) varies: the Gyo-gak Bok-doo in that the Gaks, roundly arisen to the direction of the top, are clossed each other (tombs of the Kings Tae-jong), the downward style Jeon-gak Bok-doo in that soft Gaks are hanged on the shoulders (tombs of the Kings Joong-jong and Seong-jong) and another types of Jeon-gak Bok-doo having Gaks which arearisen steeply or roundly to the direction of top and the end of which are treated in a rounded or straight line form. At the lower edge one protrusive line distinctly reveals. Exceptionally, there reveals 11 Yang-gwan (gwan having 11 stripes erected) at the Ryu-neung of the King Moon-jo, 9 Yang-gwan at the Hong-neung of the King Go-jong and 11 Yang-gwan at the You-neung of the King Soon-jong; noting that the Yang-gwan of Baek Kwan, granted by the Myeong-dynasty of the China during the Yi-dynasty, was in the shape of 5 Yang-gwan for the first Poom (class) based on the principle of "Yideung Chaegang" (gradual degrading for secondary level), the above-mentioned Yang-gwans are very contrary to the principle and I do not touch such issue in this study, leaving for further study. (2) Po (gown). (a) Git (collar). Collar style of Po was the Ban-ryeong (round collar) having small neck-line in the early stage and was changed to the Dan-ryeong (round collar having deep neck-line) in the middle of the: dynasty. In the Dan-ryeong style of the middle era (shown at the tomb of the King Young-jo); a, thin line such as bias is shown around the internal side edge and the width of collar became wide a little. It is particularly noted that the Ryu-neung established in the middle stage and the You-neung in the later stage show civil servants in Jo-bok with the the Jikryeong (straight collar) Po and in case of the Hong-neung, the Hong-neung, the tomb of the King Go-jong, civil servants, although they wear Yang-gwan, are in the Ban-ryeong Po with Hoo-soo (back embroidery) and Dae and wear shoes as used in the Jo-bok style. As I could not make clear the theoretical basis of why the civil servants' costume styles revealed, at these tombs of the Kings are different from those of other tombs, I left this issue for further study. It is also noted that all the civil servants' stone images show the shape of triangled collar which is revealed over the Godae-git of Po. This triangled collar, I believe, would be the collar of the Cheomri which was worn in the middle of the Po and the underwear, (b) Sleeve. The sleeve was in the Gwan-soo (wide sleeve) style. having the width of over 100 centimeter from the early stage to the later stage arid in the Doo-ri sleeve style having the edge slightly rounded and we can recognize that it was the long sleeve in view of block fold shaped protrusive line, expressed on the arms. At the age of the King Young-jo, the sleeve-end became slightly narrow and as a result, the lower line of the sleeve were shaped curved. We can see another shape of narrow sleeve inside the wide sleeve-end, which should be the sleeve of the Cheom-ri worn under the Gong-bok. (c) Moo. The Moo revealed on the Po of civil servants' stone images at the age of the King Sook-jong' coming to the middle era. Initially the top of the Moo was expressed flat but the Moo was gradually changed to the triangled shape with the acute top. In certain cases, top or lower part of the Moo are not reveald because of wear and tear. (d) Yeomim. Yeomim (folding) of the Po was first expressed on civil servants' stone images of the Won-neung, the tomb of the King Young-jo and we can seemore delicate expression of the Yeomim and Goreum (stripe folding and fixing the lapel of the Po) at the tomb of the Jeongseong-wanghoo, the wife of the King Young-jo, At the age of the King Soon-jo, we can see the shape of Goreum similar to a string rather than the Goreum and the upper part of the Goreum which fixes Yeomim was expressed on the right sleeve. (3) Dae. Dae fixed on the Po was placed half of the length of Po from the shoulders in the early stage. Thereafter, at the age of the King Hyeon-jong it was shown on the slightly upper part. placed around one third of the length of Po. With regard to the design of Dae, all the civil servants' stone images of the Kings' tombs other than those of the Geonwon-neung of the King Tae-jo show single or double protrusive line expressed at the edge of Dae and in the middle of such lines, cloud pattern, dangcho (a grass) pattern, chrysanthemum pattern or other various types of flowery patterns were designed. Remaining portion of the waist Dae was hanged up on the back, which was initially expressed as directed from the left to the right but thereafter expressed. without orderly fashion,. to the direction of the left from the right and vice versa, Dae was in the shape of Yaja Dae. In this regard, an issue of when or where such a disorderly fashion of the direction of the remaining portion of waist Dae was originated is also presented to be clarified. In case of the Ryuneung, Hong-neung and You-neung which have civil servants' stone images wearing exceptional costume (Jo-bok), waist Dae of the Ryu-neung and Hong-neung are designed in the mixture of dual cranes pattern, cosecutive beaded pattern and chrvsenthemum pattern and that of You-neung is designed in cloud pattern. (4) Hol. Although materials of the Hol held in hand of civil servants' stone images are not identifiable, those should be the ivory Hol as all the Baek Gwan's erected as stone images should be high class officials. In the styles, no significant changes were found, however the Hol's expressed on civil servants' stone images of the Yi-dynasty were shaped in round top and angled bottom or round top and bottom. Parcicularly, at the age of the King Young-jo the Hol was expressed in the peculiar type with four angles all cut off. (5) Hwa (shoes). As the shoes expressed on civil servants' stone images are covered with the lower edges of the Po, the styles thereof are not exactly identifiable. However, reading the statement "black leather shoes for the first class (1 Poom) to ninth class (9 Poom)," recorded in the Gyeongkook Daejon, we can believe that the shoes were worn. As the age went on, the front tips of the shoes were soared and particularly, at the Hong-neung of the King Go-jong the shoes were obviously expressed with modern sense as the country were civilized.

  • PDF

프로세스 마이닝을 이용한 공공서비스의 품질 측정: N시의 건축 인허가 민원 서비스를 중심으로 (Measuring the Public Service Quality Using Process Mining: Focusing on N City's Building Licensing Complaint Service)

  • 이정승
    • 지능정보연구
    • /
    • 제25권4호
    • /
    • pp.35-52
    • /
    • 2019
  • 전자정부를 포함한 다양한 형태의 공공서비스가 제공됨에 따라 공공서비스 품질에 대한 국민의 요구 수준이 점점 높아지고 있다. 공공서비스의 품질을 높이기 위해서 공공서비스 품질에 대한 상시적 측정과 개선이 필요함에도 불구하고 전통적인 설문조사는 비용과 시간이 많이 소요되어 한계가 있다. 따라서 공공서비스에서 발생하는 데이터를 기반으로 원하는 시점에 언제라도 공공서비스의 품질을 빠르고 정확하게 측정할 수 있는 분석적 기법이 필요하다. 본 연구에서 공공서비스의 품질을 데이터 기반으로 분석하기 위해 N시의 건축 인허가 민원 서비스를 대상으로 프로세스 마이닝 기법을 이용하여 분석하였다. N시의 건축 인허가 민원 서비스는 분석에 필요한 데이터를 확보할 수 있고 공공서비스 품질관리를 통해 타 기관으로 확산 가능할 것으로 판단되었기 때문이다. 본 연구는 2014년 1월부터 2년 동안 N시에서 발생한 총 3678건의 건축 인허가 민원 서비스에 대해 프로세스 마이닝을 실시하여 프로세스 맵을 그리고 빈도가 높은 부서와 평균작업시간이 긴 부서를 파악하였다. 분석 결과에 따르면 특정 시점에 한 부서별로 업무가 몰리거나 상대적으로 업무가 적은 경우가 발생하였다. 또한 민원의 부하가 늘 경우 민원완료까지 걸리는 시간이 늘어날 것이라는 합리적인 의심을 하였으나 분석 결과 상관관계는 크게 없었다. 분석 결과에 따르면 민원완료까지 걸리는 시간은 당일처리에서 1년 146일까지 매우 다양하게 분포하였다. '하수처리과,' '수도과,' '도시디자인과,' '녹색성장과'의 상위 4개 부서의 누적빈도가 전체의 50%를 넘고 상위 9개 부서의 누적빈도가 70%를 넘어서는 등 빈도가 높은 부서는 한정적이며 부서 간 부하의 불균형이 심했다. 대부분의 민원 서비스는 서로 다른 다양한 패턴의 프로세스를 갖고 있었다. 본 연구의 결과를 활용하면 특정 시점에 민원의 부하가 큰 부서를 찾아내 부서 간 인력 배치를 탄력적으로 운영할 수 있을 것이다. 또한 민원 특성별 협의에 참여하는 부서의 패턴을 분석한 결과, 협의 부서 요청 시 자동화 혹은 추천에 활용할 수 있는 가능성이 보인다. 본 연구는 민원 서비스에 대한 프로세스 마이닝 분석을 통해 향후 공공서비스 품질 개선방향을 제시하는데 활용될 것으로 기대한다.

구인구직사이트의 구인정보 기반 지능형 직무분류체계의 구축 (Development of Intelligent Job Classification System based on Job Posting on Job Sites)

  • 이정승
    • 지능정보연구
    • /
    • 제25권4호
    • /
    • pp.123-139
    • /
    • 2019
  • 주요 구인구직사이트의 직무분류체계가 사이트마다 상이하고 SW분야에서 제안한 'SQF(Sectoral Qualifications Framework)'의 직무분류체계와도 달라 SW산업에서 SW기업, SW구직자, 구인구직사이트가 모두 납득할 수 있는 새로운 직무분류체계가 필요하다. 본 연구의 목적은 주요 구인구직사이트의 구인정보와 'NCS(National Competaency Standars)'에 기반을 둔 SQF를 분석하여 시장 수요를 반영한 표준 직무분류체계를 구축하는 것이다. 이를 위해 주요 구인구직사이트의 직종 간 연관분석과 SQF와 직종 간 연관분석을 실시하여 직종 간 연관규칙을 도출하고자 한다. 이 연관규칙을 이용하여 주요 구인구직사이트의 직무분류체계를 맵핑하고 SQF와 직무 분류체계를 맵핑함으로써 데이터 기반의 지능형 직무분류체계를 제안하였다. 연구 결과 국내 주요 구인구직사이트인 '워크넷,' '잡코리아,' '사람인'에서 3만여 건의 구인정보를 open API를 이용하여 XML 형태로 수집하여 데이터베이스에 저장했다. 이 중 복수의 구인구직사이트에 동시 게시된 구인정보 900여 건을 필터링한 후 빈발 패턴 마이닝(frequent pattern mining)인 Apriori 알고리즘을 적용하여 800여 개의 연관규칙을 도출하였다. 800여 개의 연관규칙을 바탕으로 워크넷, 잡코리아, 사람인의 직무분류체계와 SQF의 직무분류체계를 맵핑하여 1~4차로 분류하되 분류의 단계가 유연한 표준 직무분류체계를 새롭게 구축했다. 본 연구는 일부 전문가의 직관이 아닌 직종 간 연관분석을 통해 데이터를 기반으로 직종 간 맵핑을 시도함으로써 시장 수요를 반영하는 새로운 직무분류체계를 제안했다는데 의의가 있다. 다만 본 연구는 데이터 수집 시점이 일시적이기 때문에 시간의 흐름에 따라 변화하는 시장의 수요를 충분히 반영하지 못하는 한계가 있다. 계절적 요인과 주요 공채 시기 등 시간에 따라 시장의 요구하는 변해갈 것이기에 더욱 정확한 매칭을 얻기 위해서는 지속적인 데이터 모니터링과 반복적인 실험이 필요하다. 본 연구 결과는 향후 SW산업 분야에서 SQF의 개선방향을 제시하는데 활용될 수 있고, SW산업 분야에서 성공을 경험삼아 타 산업으로 확장 이전될 수 있을 것으로 기대한다.

보물 청자 투각고리문 의자의 해체 및 복원 (Dismantling and Restoration of the Celadon Stool Treasure with an Openwork Ring Design)

  • 권오영;이선명;이장존;박영환
    • 헤리티지:역사와 과학
    • /
    • 제55권2호
    • /
    • pp.200-211
    • /
    • 2022
  • 청자 투각고리문 의자는 4점 일괄유물로 경기도 개성에서 출토된 것으로 전해진다. 청자 의자는 고려시대 당시 청자 제작기술의 우수성과 화려한 생활상을 보여주는 등 미술사적으로 가치가 높아 보물로 지정 관리되어 왔다. 그러나 일괄유물 중 1점의 경우 과거 수리 복원된 것으로, 처리 재료의 열화, 처리자의 미숙함 등으로 인해 미적가치가 하락되었고, 구조적으로 불안하여 재처리의 필요성이 제기되었다. 처리 전 보존상태를 조사한 결과, 물리적 손상은 전반적으로 제조상 결함부위를 중심으로 인위적 손상이 가중되어 구조적으로 취약한 상태를 보였다. 균열부위 및 탈락된 편은 접합면이 맞지 않고 접착제가 청자 표면에 흐른 자국과 접착제 표면에 분진 등 2차적 오염물이 생겨 변질된 상태였다. 수리복원 상태를 조사하기 위해 자외선과 확대현미경을 이용하여 균열부의 접합 부위의 위치와 범위, 상태를 파악하였다. 적외선분광 분석(FT-IR)과 휴대용 X-선 형광분석을 실시하여 보존처리에 사용한 재료를 분석한 결과, 접착제로 셀룰로오스계 수지와 에폭시계 수지가 사용된 것을 확인하였다. 또한 일부 힘을 받는 접합부위에서는 접합강도를 높이기 위해 접착제에 석고(CaSO4·2H2O) 또는 골분(Ca10 (PO4)6(OH)2)을 첨가한 것을 알 수 있었다. 상태조사 결과를 바탕으로, 유물의 보존처리는 기존 접합된 상태에서 전면 해체하고 물리적으로 취약한 부분을 중심으로 접합·복원을 통해 보강하는데 중점을 두었다. 기존에 사용된 접착제를 제거하고 해체한 결과, 청자 의자는 크게 상부와 하부, 굽다리, 일부 고리 문 등 총 6개 편으로 분리되었다. 해체 후 접합면에 남아 있는 잔류 접착제 및 오염물은 화학적 및 물리적으로 제거하고 스팀세척기로 파단면 세척을 통해 재접합의 효율을 높였다. 유물의 접합은 접합부위와 크기에 따라 접착제를 다르게 적용하였다. 편의 위치만 고정하는 접합부에는 시아노아크릴계 수지 Loctite® 401을 사용하고 구조적으로 안정화시키는 부분에는 가역성을 위해 아크릴계 수지인 Paraloid® B-72 20%(in xylene)로 단면처리한 후 에폭시계 수지 Epo-tek® 301-2를 이용하여 접합하였다. 상·하부 접합 같이 힘을 받는 부위는 Epo-tek® 301-2에 Kaolin을 첨가하여 접합강도를 보강하였다. 연속되는 문양으로 추정 가능한 고리문의 결실 부분은 SN-Sheet로 뼈대를 만들고 Wood epos®로 파손단면을 연결하여 모델링하면서 고리문을 복원하였다. 그 외 접합하면서 생긴 복원 부위는 심미적 및 구조적 안정화를 위해 Wood epos®로 메움처리하였다. 복원부위 및 메움처리한 부분은 추후 전시활용에 있어 이질감이 없도록 색맞춤하였다. 다양한 과학기술을 활용한 조사와 처리과정은 체계적으로 기록하여 보존 관리하는데 기초자료로 활용하도록 하였다.

슬래브-기둥 접합부의 이력거동에 대한 기둥 형상비의 영향 (Influence of Column Aspect Ratio on the Hysteretic Behavior of Slab-Column Connection)

  • 최명신;조인중;안종문;신성우
    • 콘크리트학회논문집
    • /
    • 제19권4호
    • /
    • pp.515-525
    • /
    • 2007
  • 본 연구는 주거용 고층 건물에서 폭넓게 사용되고 있는 플랫플레이트 구조에서 장방형 기둥-슬래브 접합부를 대상으로 실시한 4개의 실험 결과를 분석한 것이다. 이 연구의 목적은 지진하중과 같이 반복적으로 작용하는 횡하중에 대하여 기둥 단면의 형상비 (${\beta}_c=c_1/c_2$=횡하중과 나란한 방향의 기둥 단면의 크기/횡하중과 직교 방향의 기둥 단면의 크기)에 따른 접합부의 이력 거동을 비교 평가한 것이다. 기둥 단면의 형상비는 $0.5{\sim}3\;(c_1/c_2=1/2,\;1/1,\;2/1,\;3/1)$으로 선정되었고, 기둥 또는 슬래브 위험단면의 둘레 길이 $(b_o)$가 일정하지 않을 경우 공칭 수직 전단력 $(V_c)$의 크기기 변화하여 중력 전단력비의 차이가 발생하기 때문에 기둥 양변의 크기를 동시에 변화시켜서 $b_o$가 일정해 지도록 기둥 단면의 크기를 결정하였다. 그리고 슬래브 휨 철근비와 중력 전단력비 $(V_g/V_c)$ 등 접합부의 이력 거동에 영향을 줄 수 있는 다른 영향 인자들은 일정한 조건으로 계획하여 기둥 형상비의 영향을 고찰할 수 있도록 하였다. 일정 수직하중과 반복횡하중이 작용하는 슬래브_기둥 접합부의 실험을 통해서 뚫림전단파괴 양상과 균열 패턴, 철근 및 콘크리트의 변형률, 접합부의 강도와 강성, 그리고 변형 능력 등을 기둥 형상비 변수에 따라 분석하였다. 또한, ACI 318-05 설계기준의 편심 전단응력 모델에 의한 전단응력을 실험 결과와 비교하여 평가하였고, 실험 결과에 기초하여 휨과 전단에 의한 접합부 불균형모멘트 전달비율에 대한 검토를 하였다.

도시공원에서 벤치의 배치장소에 따른 이용자의 시각적 선호도에 관한 연구 (A Study on the Visual Preference of Users according to the Location of Benches at Urban Community Parks)

  • 유상완;문석기;권상준
    • 디자인학연구
    • /
    • 제13권2호
    • /
    • pp.95-102
    • /
    • 2000
  • 본 연구는 도시공원내 벤치의 배치장소가 이용자의 선호도에 어떻게 영향을 주고 있는가를 파악하고자 하였다. 이를 위해 도시근린공원내 벤치의 대표적인 배치장소의 유형을 크게 4가지로 구분하고 각 배치장소별 시각적 특성과 형용사 항목들의 차이 등을 설명하고자 분산분석과 던칸분석을 실시하였다. 이상의 결과를 요약해 보면 아래와 같다. 1.벤치의 배치장소별 시각적 특성을 구성하는 인자는 감정적요인,시각적요인,물리적/개성적요인,명료성 요인,밀도요인 등 모두 5가지 요인으로 구분되었다. 이들 5가지 요인들의 설명력은 60.40%였으며,이들 요인중 심리적반응을 표현하는 감적적 요인이 가장 높게 평가되었다.2. 앞의 요인분석 결과로부터 도출된 5가지의 요인별 시가적 특성은 형용사 변인들이 배치장소별로 다르게 지각되고있는 것으로 확인되었다. 특히 조사결과 대부분의 형용사 이미지 변인들이 통계적인 유의성을 보이며 Spot1->Spot Spot 4->spot 2-> spot3의 순으로 평균점수를 나타내고 있어,벤치의 배치장소가 수변과 인접해 배치된 유형을 가장 선호하고 있는 것으로 나타났으며, 인공재료 및 인위적인 공간과 연계되어 배치되었을 것으로 나타났으며,인공재료 및 인위적인 공간과 연계되어 배치되었을 때의 선호도가 낮아지고 있음을 확인할 수 있었다. 한편, 본연구는 앞으로 검토되어야 할 것 으로 첫째 제한된 설문대상자 외에도 연령별,계층별로 다각적인 접근을 통한 선호도 조사가 지속적으로 수행되어야 한다. 둘째 본 실험에 사용된 대표적인 4가지 유형외에도 실험 대상을 확대시킬 필요가 있다. 셋째 보여지는 대상과 장소의 시각적 특성 뿐만 아니라 벤치에 앉았을 때 관찰되는 주변경관의 시각적 특성 등에 대한 조사 연구도 동시데 뒷받침될 필요가 있다.그럼에도 불구하고 본 연구결과를 통해 공원시설물 디자인을 함에 있어 유용한 자료로 활용을 기대할 수 있을 것이다.고 있다.석한후 그 결과를 종합적으로 해석함으로써 더 유효성이 높은 접근 가능성을 모색하고자 하였다. 시스템 에서 포도당을 낮은 level로 유지할 수 있었으나, 초산의 과도한 축적으로 항체 생산성의 향상은 예상에 비해 크지 않았다. 81%), C18 0(12.38%), C18: 1(25.93%), C22:6(9.95%)이며 결합지방질(結合脂肪質)은 C14 : 0(11.60%), C16 : 0(18.94%), C16: 1(10.42%). C18 : 1(10.89%), C22 : 6(23.44%)이었다. 총필수지방산(總必須脂肪酸) 함량(含量)은 극성지방질(極成脂肪質)$(20.14{\sim}31.12%)$이 비극성지방질(非極成脂肪質)$(6.97{\sim}11.13%)$보다 훨씬 높았고, 결합지방질(結合脂肪質)이 유리지방질(遊離脂肪質)보다 높았으며 부위별(部位別)로는 피부(皮部)$(15.18{\sim}15.41%)$가 육질부(肉質部)$(6.97{\sim}11.13%)$보다 높았다. 또${\omega}3$고도부포화지방산(高度不飽和脂肪酸) 함량(含量)은 육질부(肉質部)$(15.15{\sim}28.32%)$가 피부(皮部)$(6.77{\sim}18.18%)$나 내장부(內臟部)$(8.35{\sim}9.74%)$보다 높았으며, 육질부(肉質部)에서는 극성지방질(極成脂肪質)$(26.28{\sim}34.18%)$이 비극성지방질(非極成脂肪質)$(15.15{\sim}28.32%)$보다 높았다.veral world-wide prediction models. Based on the analysis, we can easilty know the importance of the model

  • PDF