• 한국CDE학회논문집
• /
• 제6권3호
• /
• pp.147-156
• /
• 2001

In the construction industry, construction process includes a variety of design stages with cooperation and regulation by many related disciplines. In addition, the construction market is growing and becoming more complex. With this characteristic, design information has become more and more complicated and difficult to manage by the simple and traditional data management methodology. In the practical field, although CAD has been widely available for the last ten years, related disciplines have not shared digital information efficiently. This paper suggests a construction CAD data exchange model that has been developed through investigation and analysis of Korean construction CAD practices and foreign CAD standards. Moreover, this paper investigates a CAD data exchange model using STEP to improve information availability and overcome the limit of CAD systems.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제8권1호
• /
• pp.14-28
• /
• 2000

The frequency response characteristics of a condenser were numerically studied for the control of refrigeration and air conditioning systems. The important parameters, such as the refrigerant flow rate, refrigerant temperature, air velocity, and air temperature at the condenser inlet, were analyzed. Superheated vapor, two phase, and subcooled liquid domain in condenser can be described by using the energy balance equation and the mass balance equation in refrigerant and tube wall, the basic equation for describing the dynamic characteristics of condenser can be derived. The transfer function for describing dynamic response of the condenser to disturbances can be obtained from using linearizations and Laplace transformations of the equation. From this transfer function, analytical investigation which affects the frequency responses of condenser has been made. Block diagrams were made based on the analytic transfer function; dynamic responses were evaluated in Bode diagrams on the frequency response. Through this study, it became possible that the information about the dynamic characteristics of air-cooled condenser is offered. The results may be used for determining the optimum design parameters in actual components and entire systems. Also, the mathematical models, frequency response may be used to help understanding, evaluate optimum design parameters, design control systems and determine on setting the best controller for the refrigeration and air-conditioning systems.

• International Journal of Computer Science & Network Security
• /
• 제21권1호
• /
• pp.55-63
• /
• 2021

The design functionality put forward by mapping the interactiveness of information. The presentation of such information with the user interface model indicates that the guidelines, concepts, and workflows form the deliverables and milestones for achieving a visualized design, therefore forming the right trend is significant to ensure compliance in terms of changing consideration and applying evaluation in the early stages. It is evidenced that prototype design is guided by improvement specifications, includes modes, and variables that increase improvements. The study presents five user interface testing methods. The testing methods are heuristic evaluation, perspective-based user interface testing, cognitive walkthrough, pluralistic walkthrough, and formal usability inspection. It appears that the five testing methods can be combined and matched to produce reasonable results. At last, the study presents different mobile application designs for student projects besides the evaluation of mobile application designs to consider the user needs and usability.

• 한국전자통신학회논문지
• /
• 제2권4호
• /
• pp.244-249
• /
• 2007

HL7은 병원정보 시스템에서 사용되는 정보와 관련된 표준화된 프로토콜이다. Central Monitor로부터 전송되어진 환자의 생체정보 Raw Data가 HIS의 데이터 수신 모듈을 통해 사용가능한 데이터로 재구성될 수 있도록 설계가 이루어져 있다. 환자 생체정보에 대한 실시간성과 생체정보에 대한 생체정보 데이터의 연속성을 부여함으로서 베드 사이트의 환자에게서 발생된 모든 생체정보에 의해 환자 관리가 이루어진다. 또한 보다 많은 검사장비의 데이터를 데이터베이스를 이용하여 전산화함으로서 해당 환자의 광범위한 자료 검색이 이루어지므로 획기적인 원격진료로 활용이 가능하다.

• 대한산업공학회지
• /
• 제30권1호
• /
• pp.17-26
• /
• 2004

In this study, the usability evaluation of a menu-structure was performed using spreading activation model with respect to human's memory retrieval. Spreading Activation Model is effectively used to understand the process of information retrieval, so it can be used as a theoretical background for modeling of the process of human's information retrieval. For spreading activation test (SAT), subjects were presented with 67 pairs of menu titles, which consist of a menu title in the high level menu item and a menu title for the next lower level menu item, from Korea University's web site. For performance tests, three scenarios were developed with longer reaction times and ambiguous associations found in the SAT to reflect the existing problems of the website. As a result, the SAT was found to bean effective tool to enhance the website usability because the SAT could bea substitute for the performance test with a high correlation $({\rho}=0.735,\;{\alpha}=0.05)$. After remaining menu titles with slow reaction times and ambiguous associations found in SAT, the website usability was significantly improved with faster reaction times and less ambiguous associations proven with smaller number of web-page visits. Therefore, the SAT could be used as a methodology to design and evaluate the user-centered menu structure related to human's association structure.

• 대한전자공학회논문지TC
• /
• 제44권11호
• /
• pp.11-18
• /
• 2007

FFT(Fast Fourier Transform) 프로세서는 WiBro, DAB, UWB와 같은 OFDM 시스템의 구현에 있어 중요한 블록 중 하나이다. 현재, FFT 프로세서의 구현에 관한 연구는 계속 이루어지고 있으며 대부분의 연구들은 곱셈기의 수나 면적감소, 메모리 사이즈 감소, 제어회로를 감소시키는 것에 초점을 두어 진행되고 있다. 본 논문에서는 IFFT(Inverse Fast Fourier Transform)에서 요구되는 메모리를 감소시키기 위하여 mapping 방법을 토대로 한 새로운 IFFT 설계방법을 제안한다. WiBro를 위한 1024포인트 IFFT를 설계하기 위해 $Radix-2^4$ SDF(Single-Path Delay Feedback) 구조를 사용하여 시뮬레이션하였으며 제안된 IFFT 설계방법으로 구현했을 시 기존의 방법으로 설계했을 때와 비교하여 메모리가 차지하는 면적에서 60%이상의 감소와 입력비트별로 다양한 SQNR(Signal-to-Quantization-Noise Ratio) 이득을 보였다.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.171-176
• /
• 2005

In the information storage development, the trend of the storage device is to increase the recording density. Among such an effort, near-field probe recording is spotlighted as a method of high increasing recording density. For the successfully embodiment of storage device, the actuating mechanism of near-field probe is essentially designed. In this paper, we suggest the slider similar with conventional HDDs and design the slider using near- field probe for the purpose of applying the slider in order to control gap between probe and media. The most important object of slider design is to guarantee the flying ability and stability. For achievement of these design objects, we perform two step of optimal design process. The media is mod! eled as random displacement, which is only considered roughness of disk surface. The design slider is analyzed with dynamic state in assumed media. At this process, the optimal model is confirmed to stable flying stability.

• 시스템엔지니어링학술지
• /
• 제18권1호
• /
• pp.84-89
• /
• 2022

For system maintenance optimization, it is necessary to establish a state information system by CBM+ including CBM and RCM, and sensor selection for CBM+ application requires system process for function model analysis at the early design stage. The study investigated the contents of CBM and CBM+, analyzed the function analysis tasks and procedures of the system, and thus presented a D-FMEA based sensor selection inference methodology at the early stage of design for CBM+ application, and established it as a D-FMEA based sensor selection inference process. The D-FMEA-based sensor inference methodology and procedure in the early design stage were presented for diesel engine sub assembly.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1744-1747
• /
• 2002

In late years, the tendency to shift the design language of electronic circuits from HDL to C-based languages of C/C)1 and so on is strengthened. The current of adopting these software languages thrives by necessity to solve the problem peculiar to HDL that verification of design is difficult. When we use C-based languages, we can describe the design by higher abstraction degree, mount the design as both hardware and software finally and so that express the design part which is not made clear at early stage the same one language. Therefore, the flexibility of design very improves, the design work in environment the range of applying the whole systems become possible. This paper introduces example at having applied C-based languages in image processing LSI design and describes that the design technique of C-based languages is effective for the system design.

• Journal of Information Technology Applications and Management
• /
• 제11권3호
• /
• pp.147-159
• /
• 2004

Empirical evidence on the maintainability of object-oriented systems is far from conclusive, partly due to lack of representativeness of the subjects and systems used in the study. The present research empirically examined this issue with the systems that are mission-critical. currently operational and maintained by professionals. It was found that the 00 group appeared to consume less time while maintaining more amount of software artifacts than the NOO counterpart. This economical utilization of time appeared evident regardless of software development life cycle. This was due to the usefulness of UML for impact analysis which contributed to effective comprehension and communication. Insufficient design specifications led to ambiguity and costly defects in transferring design solutions to development. Also. the encapsulation of 00 seemed to reduce mental loads at maintenance tasks and improved code reuse. However, the number of files to manage increased and thus. dependency management is required for the 00 systems.