• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.747-753
• /
• 1999

This paper presents results of vibration analysis of a generator-stator core for 500 MW fossil power plant. A finite element analysis using a commercial S/W is performed to estimate alternating electromagnetic forces, mainly of 120 Hz in 60 Hz machines, acting on the core, and then to calculate forced response of the core. Results are compared with design requirements.

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.83-85
• /
• 2006

The purpose of this study is to evaluate the fatigue life at the rib weldment of generator shaft. In order to do it, the stress distributions at the weldment under design loading condition were evaluated using FEA and analytical approach. The fatigue strengths of the as welded and toe machined rib specimen were estimated using 3-points bending fatigue test. Based on the fatigue test results, the S-N curve far the rib weldment of the generator shaft with post treatment was established.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.1015-1018
• /
• 2003

과거 우리는 플랫폼 독립적인 XML과 GUI 기반의 툴들을 제공하여 장비에 대한 제어 및 모니터링 소프트웨어의 효율적인 생성과 유지보수성을 향상하기 위한 프레임워크[1][2]를 제안하였다. 제안한 프레임워크는 세 가지의 XML 문서(IID, MAP, CMIHL), VI Wizard, Generator로 구성되었다. 본 논문에서는 제안한 프레임워크의 한 구성요소인 Generator에 대한 설계와 구현을 보인다. Generator는 장비의 제어정보 모니터링 정보, 통신 정보, 스케줄 정보, 제어 소프트웨어의 사용자 인터페이스 정보 등을 기술하는 CMIML(Control & Monitor ing Instrument Markup Language) 문서를 이용해서 GUI 기반의 사용자 인터페이스 편집 환경을 제공하고, CMIML 문서를 소프트웨어 코드로 변환함으로써 제어 및 모니터링 소프트웨어를 자동 생성한다.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.1072-1079
• /
• 2014

This paper introduces a coordinated droop control for the stand-alone DC micro-grid, which is composed of photo-voltaic generator, wind power generator, engine generator, and battery storage with SOC (state of charge) management system. The operation of stand-alone DC micro-grid with the coordinated droop control was analyzed with computer simulation. Based on simulation results, a hardware simulator was built and tested to analyze the performance of proposed system. The developed simulation model and hardware simulator can be utilized to design the actual stand-alone DC micro-grid and to analyze its performance. The coordinated droop control can improve the reliability and efficiency of the stand-alone DC micro-grid.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1003-1004
• /
• 2011

In this paper, the Interior Permanent Magnet Generator utilizing the power of the robot engine was designed. We designed considering the required power of the auxiliary power to be also used in robot. The rotor which is suitable for the high speed operation was designed. And the generator which utilized this finite element method (FEM) and can deliver the optimum output to the auxiliary power was designed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.52-59
• /
• 2001

In this study, a technique has been developed to analyze the performance of the launching system using a gas generator of solid propellant. The physical model which described the thermodynamic behaviors of all launching devices from gas generator to canister and the dynamic behavior of missile was established, applying the empirical coefficients in the heat loss model. The processes of combustion, flow, and heat transfer inside the chamber of gas generator and the launching system were simulated by numerical method. The theoretical analysis guided the optimal design of gas generator and system, which made the launching system satisfy the requirements of good performance and high reliability.

• Journal of Power System Engineering
• /
• v.17 no.4
• /
• pp.31-35
• /
• 2013

The emergency AC power supply system of the nuclear power plant is designed to supply the power to the nuclear power plant at the emergency operating condition. The safety function of the diesel generator at the nuclear power plant is to supply AC electric power to the safety system whenever the preferred AC power supply is unavailable. The reliable operation of onsite standby diesel generator should be ensured by a condition monitoring system designed to maintain, monitor and forecast the reliability level of diesel generator. The purpose of this paper is to improve the existing ultrasonic sensor used for condition diagnosis of engine fuel pump and cylinder head for the accurate diagnosis in actual engine condition of emergency diesel generator(EDG). As a result of this study, we could design and develop much more reliable ultrasonic sensor than existing ones.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.277-277
• /
• 2009

In this paper, PMPG (Piezoelectric Micro Power Generator) was investigated by ANSYS FEA (Finite Element Analysis) to decrease operating frequency and improve out power. The micro power generator was designed to convert ambient vibration energy to electrical power as a ZnO piezoelectric material. To find optimal model in low vibration ambient, the shape of power generator was changed with different membrane width, thickness, length, and proof mass size. Used the ANSYS modal analysis, bending mode and stress distribution of optimal model were analyzed. Also, the displacement with the frequency range was analyzed by harmonic analysis. From the simulation results, the resonance frequency of optimal model is about 373 Hz and confirmed the possibility of ZnO micro power generator for wireless sensor node applications.

• Particle and aerosol research
• /
• v.8 no.4
• /
• pp.143-150
• /
• 2012

Fungal particles have been known to aggravate indoor air quality. To develop fungal particle cleaning devices requires a well-controlled generator of fungal aerosol particles. In this study, a novel fungal aerosol generator was designed and tested for anti-fungal experiment. Cladosporium cladosporioides was selected as test fungal particle. After aerosolization, the number concentration and the size of particles were measured by aerodynamic particle sizer. The number concentration depended on the vibration strength and vibration period of the designed fungal aerosol generator. For the vibration strength of 10volt and the period of 10 sec (5 sec on and 5 sec off), the stable particle generation with concentration of 10#/cm3 was maintained during 35 minutes.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.4
• /
• pp.251-259
• /
• 2007

AUTOSAR is a partnership of automotive manufacturers and suppliers working together to develop and establish a de-facto open industry standard for automotive software architectures. In the AUTOSAR architecture, the runtime environment is at in the heart of the AUTOSAR architecture to provides the infrastructure services that enable communication between software components and between software components and basic software components. The RTE generator is an automated generation tool for AUTOSAR specification based RTE according to the ECU configuration. It generates communication API function for the software components and the basic software components like OS and COM of the application. The availability and the accuracy of the RTE generator are important for the automobile software which is based on AUTOSAR architecture, this paper proposes an architectural design of the RTE generator for auto-generation of the AUTOSAR based RTE.