• Fashion & Textile Research Journal
• /
• v.23 no.3
• /
• pp.323-336
• /
• 2021

This study investigated the cognitive process of fashion design images through eye activity tracking. Differences in the cognitive process and gaze activity according to image elements were confirmed. The results of the study are as follows. First, a difference was found between groups in the gaze time for each section according to the model and design. Although model diversity is an important factor leading the interest of observers, the simplicity of the model was deemed more effective for observing the design. Second, the examination of the differences by segments regarding the gaze weight of the image area showed differences for each group. When a similar type of model is repeated, the proportion of face recognition decreases, and the proportion of design recognition time increases. Conversely, when the model diversity is high, the same amount of time is devoted to recognizing the model's face in all the processes. Additionally, there was a difference in the gaze activity in recognizing the same design according to the type of model. These results enabled the confirmation of the importance of the model as an image recognition factor in fashion design. In the fashion industry, it is important to find a cognitive factor that attracts and retains consumers' attention. If the design recognition effect is further maximized by finding service points to be utilized, the brand's sustainability is expected to be enhanced even in the rapidly changing fashion industry.

• Steel and Composite Structures
• /
• v.44 no.1
• /
• pp.119-139
• /
• 2022

This paper aims to use the artificial intelligence approach to develop a new model for predicting the ultimate axial strength of the circular concrete-filled steel tubular (CFST) stub columns. For this, the results of 314 experimentally tested circular CFST stub columns were employed in the generation of the design model. Since the influence of the column diameter, steel tube thickness, concrete compressive strength, steel tube yield strength, and column length on the ultimate axial strengths of columns were investigated in these experimental studies, here, in the development of the design model, these variables were taken into account as input parameters. The model was developed using the backpropagation algorithm named Bayesian Regularization. The accuracy, reliability, and consistency of the developed model were evaluated statistically, and also the design formulae given in the codes (EC4, ACI, AS, AIJ, and AISC) and the previous empirical formulations proposed by other researchers were used for the validation and comparison purposes. Based on this evaluation, it can be expressed that the developed design model has a strong and reliable prediction performance with a considerably high coefficient of determination (R-squared) value of 0.9994 and a low average percent error of 4.61. Besides, the sensitivity of the developed model was also monitored in terms of dimensional properties of columns and mechanical characteristics of materials. As a consequence, it can be stated that for the design of the ultimate axial capacity of the circular CFST stub columns, a novel artificial intelligence-based design model with a good and robust prediction performance was proposed herein.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.115-127
• /
• 2000

The purpose of this study is to propose the Design Object Model for implementation of an integrated structural design system for building structures. This study outlines the step-by-step development methodologies of the Design Object Model, which covers classification and modeling of the building design information. The Design Object Model has been efficiently developed through the proposed development methodologies. As a result, the Design Object Model has been proved to be efficient in design information management by representing the information from planning perspective, in recognition of structural member in space by the topology design object, and in representation of analysis s design information.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.2
• /
• pp.17-30
• /
• 2019

Due to difficulties in tracking design information of existing document-based configuration management, the research on the development of plant SysML model was started to apply the model-based system engineering methodology to comprehensively manage various design information. However, until now, in order to create the SysML model, the engineers are checking the design information and inputting it to the SysML model. This process requires a lot of time and manpower, it is required to minimize it. Therefore, this study has recognized the problem, a plug-in that extracts the plant design information in the design document and automatically converts the SysML plant model from it. Specifically, the development was performed in the following order. First, the extraction file was selected as the most commonly used Excel file as the plant design document. Next, the design information in the document was analyzed, and extracted information including tag number, name, and the capacity were selected. Finally, the plant SysML model conversion module was implemented. The developed plug-in is confirmed that the task load of the engineers by the SysML model conversion can be minimized and the model can be generated more quickly and accurately.

• Journal of Distribution Science
• /
• v.21 no.4
• /
• pp.11-20
• /
• 2023

Purpose: 1) develop a learning model involving design thinking to develop creative economy innovation and the characteristics of digital entrepreneurs. 2) evaluate the impact of design thinking on creative economy innovation 3) evaluate the impact of design thinking on digital entrepreneurial ability. Research design, data and methodology: 1) develop a learning model involving design thinking in order to develop creative economy innovation and the characteristics of digital entrepreneurs. 2) Evaluating creative economy innovation involving design thinking. 3) Assessing the characteristics of digital entrepreneurs based on design concepts. Results: 1) the development of a learning model involving design thinking to develop creative economy innovation and digital entrepreneurial competency 2) The students who studied using the learning model involving a design thinking process had the highest overall scores in terms of creative economy innovation 3) The scores for the assessment of digital entrepreneurial activity for the students who studied by using the design thinking learning model were at a high level. Conclusions: The development of the design thinking learning model can encourage students to be able to develop creative economy innovations and to empower digital entrepreneurs' ability for distribution strategy. Educational institutions that would like to succeed in developing creative economy innovative and digital entrepreneurship characteristics with the support of design thinking.

• Journal of Distribution Science
• /
• v.11 no.3
• /
• pp.13-22
• /
• 2013

Purpose - Product purpose for optimal values solution for synthesize evaluative criteria and optimize product design values. In addition, product designer has to consider the product design to conform to project, laws and regulations, authentication, from the product design stage. Research design, data, methodology - How to use an evaluative criteria model's imprecise market data by evaluative criteria research design; product mapping relationships between design parameters and customer requirements using product predicted value method. An evaluative criteria model and their associated criteria status, product evaluative criteria model of results. Results - Therefore, after the enterprise product design project analysis, effectiveness and the customer degree of satisfaction must be appraised to obtain the maximum value for the benefit on behalf of the implementation goals, the promotion product level and market competition strength. Conclusions - In multi criterion decision making (MCDM), using its searching software capacity to obtain the optimal solution.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.3
• /
• pp.151-161
• /
• 2005

This paper describes the parting and Boolean operations for a pseudo-solid model of a plastic part, and their application to injection mold design. Here, a pseudo-solid model means a sheet model that looks like a solid model, but its boundary is not closed. When a solid model created in a different CAD system is imported through a standard data exchange file format, in most cases, a pseudo-solid model may be created due to tolerance or some other problems. However, most existing mold design systems based on solid modeling kernels require a complete part solid model. Therefore, mold designers have to do time-consuming healing operations to convert a pseudo-solid to solid. To eliminate or reduce the healing pre-process for mold design, in this paper, we proposed the parting and Boolean Operations on pseudo-solid part models. This paper also describes their detailed implementation and a case study.

• Journal of the Korean Statistical Society
• /
• v.31 no.3
• /
• pp.277-299
• /
• 2002

Most statistical designs, such as orthogonal designs and optimal designs, are based on a specific statistical model. It is very often that the experimenter does not completely know the underlying model between the response and the factors. In computer experiments, the underlying model is known, but too complicated. In this case we can treat the model as a black box, or model to be unknown. Both cases need a space filling design. The uniform design is one of space filling designs and seeks experimental points to be uniformly scattered on the domain. The uniform design can be used for computer experiments and also for industrial experiments when the underlying model is unknown. In this paper we shall introduce the theory and method of the uniform design and related data analysis and modelling methods. Applications of the uniform design to industry and other areas are discussed.

• Journal of the Korean Society of Costume
• /
• v.50 no.2
• /
• pp.97-109
• /
• 2000

The purpose of this study is to apply 3D computer graphics in fashion design as a creative medium and it attempts to fine out what advantages 3D technique can offer to fashion design. For this purpose, this study, first, tries to develop a 3D digital model in which designer can select design, color , pattern and fabric palette whatever necessary . This study uses of the software named 'Poser of Fractal Design' and the and the 3D digital model comprises four stages ; body modeling, item design (item coordination), color design (color coordination), pattern and fabric design (pattern and fabric coordination). Secondly, this study seeks to accumulate a data base which was produced in the course of case studies, which have applied 3D digital model to design. The outcome of the case studies shows that 3D digital model can enhance designing in the following four aspects. ⅰ) It can give more freedom to designer to try various ideas, revise and modify them, It can also produce random generation. Through this process, the designer test various input and output without damage on fabric after revision and alteration. ⅱ) It can help designers to enhance their accuracy. Since fault in the design developed by the 3D digital model can be detected in advance, designers can make correlation before actual work begins. In the end, designers can express their ideas and intention accurately as well as freely. ⅲ) Since design developed by the 3D digital model can be shared on screen by various actors in the course of priduction such designers , merchandisers, and supervisors, it can help communication between and cut the time of feedback.ⅳ) By using the 3D digital model, designers can work from the begining with awareness of actual outcome their design, since the 3D digital model provide animation, which helps designers to envisage visual changes as they apply various items, colors, pattern and fabrics.

• The Journal of Information Systems
• /
• v.16 no.4
• /
• pp.131-155
• /
• 2007

The purpose of this thesis is to study on the philosophical analysis model and its methodological application of information systems research evaluation from critical realist perspective. Fist of all, I examine ontological epistemological methodological assertions of critical realism. Because the philosophy of critical realism is an opportunity for information systems study. I examine Dobson and Mutch's critical realist perspective on actors-structure model. I suggest a critical realist actors-praxis-structure model. This model provides the potential for a new approach to social investigations in its provision of an ontology for the analytical separation of structure and agency. Of most importance might be the incorporation of non-humans into the analysis of social interaction and of technology into the elaboration of structures. I also examine Tsoukas's critical realistic meta-theory of management. I suggest a critical realist IS management model. This model elucidate the nature of management and delineate the scope of applicability of various perspectives on management. The causal powers of management reside in the real domain and, taken together, their logics are contradictory, the effects of their contradictory composition are contingent upon prevailing contingencies. I analyze Carlsson's theory of design knowledge. His framework builds on that the aim of IS design science research is to develop practical knowledge for the design and realization of different classes of IS initiatives, where IS are viewed as socio-technical systems and not just IT artefacts. The framework proposes that the output of IS design science research is practical IS design knowledge in the form of field-tested and grounded technological rules. The IS design knowledge is developed through an IS design science research cycle. In conclusion, I think that IS actors-praxis-structure model, meta-theoretical IS management model, and IS design knowledge model according to critical realistic approach are very useful for IS research evaluation. Nevertheless, important problems are left not resolved.