• Asian Journal of Turfgrass Science
• /
• v.18 no.2
• /
• pp.63-70
• /
• 2004

This study was conducted to figure out the effect of 'Methlyen Urea(MU)', slow released fertilizer and 'T-Vigor', microbial fertilizer as environment fertilizer on growth of 'Crenshaw' creeping bentgrass for environmental management in golf course. This study was conducted at No. 3, 4, 5 Valley Courses of Rexfield Country Club from April to July in 2004. MU, T-Vigor, sterilized T-Vigor were applied five times with 5g and 7.5ml per square meter, respectively. Polt size was 1 square meter and there were three replications with Completely Randomize Design. Collecting data were turf density$(No.\;of\;shoot\;/cm^2)$, chlorophyll $amount(\%)$, root length(cm), dry weight of clipping(g), and dry weight of root(g). The results are as follows; All of turf density, chlorophyll amount and dry weight(g) of MU and T-Vigor were better than control and sterilized T-Vigor. Especially root length of MU and T-Vigor was superior to control and sterilized T-Vigor, even if temperature and humidity was high. In conclusion, MU and T-Vigor might be used as slow release fertilizer for environmental green management in golf course.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.61-70
• /
• 2008

This study was conducted to develop a mobile tower-yarder with tractor for agriculture and forestry that is the efficient yarder in steep terrains, thinning operation and small scale logging operation. It was designed and manufactured that the power source of tower-yarder is equiped three hydraulic pump connected to PTO of tractor, and three hydraulic pump is used to operate the four motor for drum, the cylinder for clutch of interlocker, the cylinder for tower expanding and the out-rigger cylinder. It was to adopt the running skyline system and the inter-lock function, and to equip the double capstan drum, the storage drum and the clutch for interlock in the development of tower-yarder. It was to develop the tower-yarder which the winch torque of double-capstan drum, the traction force of double-capstan drum, the number of rotation of double-capstan drum and the line speed is $191kg{\cdot}m$, 1,910 kgf, 220.5 rpm and 138.5 m/min, respectively. And it was known that the optimum flange diameter of the main and haulback storage drum is about 360 mm and about 460 mm in order to storage the main line length of 250m and the haulback line length of 450 m. The carriage was made to adopt the running skyline system and to equip the lock function in order to the convenience of chocking and the fall down preventing of tree. It was provided to develop the wire remote controller for the inter-lock function, the convenience of control and the efficiency of yarding. In development process, this tower-yarder was attached the 3-point linkage hitch equipment and the tire wheel for the traction and moving of tower-yarder. Also, it was equipped that the out-rigger and the guy line in order to raise the safety and efficiency of yarding of tower-yarder.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.4
• /
• pp.290-296
• /
• 2015

This study was conducted to investigate the influence of the mixed application of chemical fertilizer (CF) with liquid swine manure (LSM) on the agronomic characteristics, dry matter yield, minerals, and free sugar in cultivating Sorghum ${\times}$ Sorghum Hybrid (SSH) on paddy soil. The field experiment was designed in a randomized block design with three replications and consisted of CF 100% (C), CF 70% + LSM 30% (T1), CF 50% + LSM 50% (T2), CF 30% + LSM 70% (T3), and LSM 100% treatment (T4). The application of LSM was based only on the nitrogen (150 kg/ha). Plant length, leaf length, leaf width and stem diameter were significantly the lower in T4 (p<0.05). Stem hardness increased significantly (p<0.05) as the LSM application rate decreased. Fresh yield was the highest in T2, whereas the lowest in T3 (p<0.05). However, dry matter yields and TDN yield did not show significant difference among treatments. Crude protein was the highest in T1 (p<0.05). Crude fat content did not significant differences between the T1, T2, T3 and T4, but C showed a significantly different (p<0.05). NDF and crude fiber were the highest in T3 and C, respectively (p<0.05). However, ADF did not show significant difference among treatments. Total mineral contents were higher in the order of T1> T2> T4> T3> C (p<0.05). Free sugar contents were significantly higher at T1 and C as compared to other treatments. The analysis of all the above results suggests that the application of liquid swine manure is very effective, considering the yield performance and the content of mineral and free sugar. In addition, liquid swine manure may be possible to grow SSH without chemical fertilizer.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.2
• /
• pp.158-175
• /
• 2005

Statement of problem. Every effort has been continually made to obtain objectivity in measuring the longevity of fixed restorations, such as by establishing unified judgement standard for deciding success and adopting statistical method that analyzes the data of successful and failed cases at the same time. In Korea, however desired level of development has not to be made in this field yet. Purpose. This study, adopting California Dental Association (CDA) quality evaluation system, established objective standard for deciding success, and inferred the longevity of fixed restorations and their failure analysis through adopting Kaplan-Meier survival analysis. Material and method. In order to assess the longevity of flxed restorations serviced in Korea and causes of failure, a total of 1109 individuals (aged 15-74, 716 women and 393 men loaded with 2551 unit fixed restorations, and 1934 abutments) who lived in Kyung-In Province were examined and the findings were as follows : Results. 1. Length of service of fixed restorations serviced in Korea was 6.86$\pm$0.15 yr (mean), 5.5 yr (median), and the rate of success was 65.82% in 5 year survival, and 21.15% in 10 year survival. 2. When there was patient's need for replacing old prosthetics, longevity of fixed restorations was 7.51$\pm$0.27 yr (mean), 7 yr (median), and the rate of success was 61.08% in 5 year survival, and 17.57% in 10 year survival. 3. Longevity of fixed restorations was longest in the over-sixty age group(9.21$\pm$0.66) and that of the teen age group(3.39$\pm$0.28) was shortest (p<0.05). 4. Longevity of fixed restorations of women (7.38$\pm$0.18 years) was longer than that of men (6.00$\pm$0.26) (p<0.05). 5. As for the provider factor (such as unlicensed performers, university hospitals, and private clinic), there was no statistically significant difference in longevity of fixed restorations. 6. Defective margin (34.78%). periodontal disease (12.15%), periapical involvement (11.73%), was the most frequent causes of failure and poor esthetics group showed the longest life above all (p<0.05). Actual frequent causes of failure after removing old prosthetics were defective margin, periapical involvement, periodontal disease and uncemented restoration. In 75.67% of the cases, abutment state after removing old prosthetics was good enough for loading another prosthetics. 7. There was found to have statistically significant influence between longevity of single crown (6.35$\pm$0.20 yr) and that of 3 unit fixed restorations (7.60$\pm$0.30 y) (p<0.05). In each case the most frequent cause of failure was defective margin. 8. The number of cantilever pontic, pontic/abutment ratio, oral hygiene status were found to have no statistically significant influence on longevity of fixed restorations in all groups (p>0.05). 9. Longevity of fixed restorations made of non precious metal was longest (9.60$\pm$0.40 yr) semi precious and precious trailing behind(p<0.05). 10. Group function group (37.04%) and partial group function group (44.62%) were predominant in frequency but showed no correlation between them and among different types of occlusal plane and different types of occlusal surface (p>0.05). 11. Longevity of fixed restorations was longest in the centric interference group(9.35$\pm$0.62) (p<0.05) among different types of occlusal interference. Conclusion. We found that longevity of fixed restorations serviced in Korea is affected by age, gender and type of material, and that most frequent cause of failure is defective margin. In order to assess the accurate longevity of axed restorations, unified research design. overcoming inter-observer difference and establishing the objective research items are needed. Furthermore, it is thought that prospective approach through thorough study and regular follow-ups is needed just from the start of research. Nationwide detailed studies on length of service of fixed restorations manufactured in Korea are hoped to be conducted hereafter.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.87-97
• /
• 2015

There's a trend towards vitalization of nightscape planning businesses nationally and locally as well for city image making and activation of regional economy, but there is still no systematic nightscape planning going on for lack of relevant researches and objective evaluations. This study aims to suggest the guideline for nightscape planning by conducting an eye tracking experiment and survey for recognizing the characteristics of a nightscape. Furthermore, the authors intended to verify the eye-tracking method as a tool for landscape evaluation. The research site was restricted in the campus of Virginia Tech, VA, and those were selected by experts' survey among various types of nightscape images. The variables for analyzing the characteristics of nightscape images selected were 'preference', 'safety(fear)' and 'clearness'. 'Fixation duration', 'saccade duration', 'scan path length', and 'pupil size' were selected as the eye movement measurements. The results of this study are as follows: The first outcome found was that there were significant differences among the characteristics(preference, safety and clearness) of a nightscape by MANOVA, and these variables were correlated positively by Pearson's correlation. Secondly, there were differences on fixation duration, saccade duration and scan path depending on the nightscape setting statistically. Also, the eye tracking measurement in an open setting was recorded lower than enclosed settings. In the result of a heat map, we found the meaning of the fixated areas on both viewing without intention and viewing intentionally. It turned out that the fixated areas were consistent with the areas the subjects felt preferred and clarity in all of the nightscape images, which means people usually focus on what they prefer and see clearly in a certain nightscape. Based on this result and previous studies, the authors could make a conclusion that eye tracking method can apply to evaluate nightscape settings in terms of analyzing the whole characteristics and finding specific points for the detailed analysis as well. Therefore, these results can contribute by suggesting nightscape planning, implication of the landscape evaluation, and implication of the eye tracking study.

• Analytical Science and Technology
• /
• v.13 no.4
• /
• pp.494-503
• /
• 2000

A 21-residue peptide corresponding to amino acids 84-104 of $p16^{INK4A}$, the tumor suppressor, has been synthesized and its structure was studied by Circular Dichroism, $^1H$ NMR spectroscopy and molecular modeling. A p16-derived peptide (84-104 amino acids) forming stable complex with CDK4 and CDK6 inhibits the ability of CDK4/6 to phosphorylate pRb in vitro, and blocks cell-cycle progression through G1/S phase as shown in the function of the full-length p16. Its NMR spectral data including NOEs, $^3J_{NH-H{\alpha}}$ coupling constants, $C_{\alpha}H$ chemical shift, the average amplitude of amide chemical shift oscillation and temperature coefficients indicate that the secondary structure of a p16-derived peptide is similar to that of the same region of full-length p16, which consists of helix-turn-helix structure. The 3-D distance geometry structure based on NOE-hased distance and torsion angle restraints is characterized by ${\gamma}$-turn conformation between residues $Gly^{89}-Leu^{91}$(${\varphi}_{i+1}=-79.8^{\circ}$, ${\varphi}_{i+1}=60.2^{\circ}$) as evidenced in a single crystal structure for the corresponding region of p18 or p19, but is undefined at both the N and C termini. This compact and rigid ${\gamma}$-turn region is considered to stabilize the structure of p16-derived peptide and serve as a site recognizing cyelin dependent kinase, and this well-defined ${\gamma}$-turn structure could be utilized for the design of anti-cancer drug candidates.

• Korean Journal of Ecology and Environment
• /
• v.37 no.3 s.108
• /
• pp.332-343
• /
• 2004

This study was conducted to test a possibility of water quality improvement using a filter-feeding bivalve (Corbicula leana). In mesocosm scale (width ${\times}$ length ${\times}$ depth: 3 m ${\times}$ 3 m ${\times}$ 0.5 m), we investigated the changes of dissolved nutrient and particulate matter including both abiotic and biotic seston. Short term (16 days) mesocosm experiment was conducted in two stages: the first stage for 8 days and consecutive 8 days of the second stage. Both treatment and control mesocosm were switched over by translocating mussels from the treatment mesocosm to the control, at 8th days since the start of the experiment. This design made it possible to compare mussel effect on the water quality change more clearly. The high mortality of mussel was observed in the treatment of the first stage, but it decreased rapidly and stabilized on the 8th day to less than< 4 ind $day^{-1}$. Chl. a concentration in the treatment mesocosm of the first and second stage decreased to 71 and 88% of initial concentration, respectively, and suspended solids decreased to 70 and 77%. At those times, average filtering rate were 0.46 and 0.61 mL AFDW $mg^{-1}$ $hr^{-1}$, respectively. Both $NH_3-N$ and dissolved total phosphorus (DTP) concentrations increased with the mussel mortality. $NH_3-N$ concentration was positively correlated with the mussel mortality, while DTP concentration showed negative correlation with it. After translocating mussel from the treatment to the control, $NH_3-N$ concentration significantly increased compared with that of initial control. Although DTP concentration also increased, there was no significant difference relative to that of initial control. These results suggest that application of this filter-feeding bivalve in a eutrophic reservoir could be a potential tool to improve water quality if mussels could acclimatize successfully in early stage of the introduction.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.4
• /
• pp.221-226
• /
• 2020

This experiment was conducted to compare the seed productivity of the Italian ryegrass(Lolium multiflorum Lam.) varieties sown in the spring in Gangwon region. The experiment was randomized block design with three replications. The Experimental field was located in alpine areas of about 600 m above sea level in Gangwon province. The tested Italian Ryegrass varieties were 'Greenfarm', 'Greencall' and 'Kowinearly' developed by National Institute of Animal Science, RDA. Italian Ryegrass varieties were sown on March 26, 2020, and the harvest was on the 60th day of mean heading date, July 2. The heading date of Kowinearly was May 8, but Greenfarm and Greencall was May 4. The plant length was the largest in the Kowinearly variety. However, the Kowinearly suffered severe lodging. There was no significant difference in the length of spike among varieties, and the number of seeds per spike was the lowest in Greenfarm at 118.5 seed/spike. As for the seed weight per spike, the Greenfarm variety was significantly lower at 0.56 g/spike, but the 1,000 seed weight was the heaviest in the Greenfarm at 2.5g.. The number of spike per unit area was the highest in Greenfarm at 906/㎡. The dry matter content of seeds was the highest in Greenfarm at 54.3%, and for straw, Kowinearly was the highest at 35.3%. Seed productivity was not significant among varieties, and the average was 1,493 kg/ha. The yield of straw after seed production was also not significant among varieties (P>0.05), and the average was 3,172 kg/ha. From the above results, the production of Italian ryegrass seeds through spring sowing in the Gangwon region is not much than autumn seeding, requiring the input of various technologies to increase productivity in the future, and it is desirable to determine the production cost through economic analysis was judged.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.2
• /
• pp.79-88
• /
• 1998

This experiment was conducted from May to August in 1997 to selected the wrn hybrids being suitable for silage at farm in the Kongju National University through the comparison of growth characteristics, forage yield and growth analysis about native and imported corn hybrids for silage production. In this experiment, trial design was a randomized block design with three replication, testing varieties were 4 hybrids (Suwon 19, Kwanganok, Whengsungok, Suwonok ) of native corn hybrids and 13 hybrids (P 3156, P 3352, P 3144w, DK 501, DK 689, DK 713, DK 729, H 643.99, H 545.64, H 645.12, HC 7466, H 644.18, H ALISEO) of imported corn hybrids. The results obtained are summarized as follows; 1. The emergence rate of H643.99 was the highest with 97.0%. In rice black streaked dwarf virus(RBSOV), the hybrid of HC 7466 was lower infected with 1.6% than other hybrids. The plant hight of P 3144w was the highest with 339 cm and the stem length of P 3156 was the highest with 261 cm. In native com hybrids, the plant height and stem length of Kwanganok were recorded with 306 cm and 235 cm, respectively. 2. Leaf number and leaf area of Kwanganok were the greatest with 16 sheet per plant and $5,180\;{\textrm{m}^2}/l0a$, respectively. H 645.12 and H 545.64 had the greatest in ear to total dry matter ratio with 49.5% and 49.4%, respectively. 3. The fresh matter yield was significantly difference between growth stage, So Suwon 19 had the most level at 15 days before silking, P 3352 had the most level at silking date, Kwananok had the most level at 35 days a after silking. The fresh matter yield of native com hybrids such as Suwon 19 and Kwanganok was not apparent diffreences as compared with imported corn hybrids. 4. As the results of survey with dry weight, the quantity of dry matter accumulation were increase after silking. The varieties of P 3352, P 3156, Kwanganok, OK 713 were more quantity of dry matter production than DK 501, HC 7466. The Kwanganok of native com hybrid and Pioneer strain with high percentage of dry matter were higher dry weight than Limagrain strain. 5. HC 7466 had the largest LAR with $6.53\;{\textrm{cm}^2}/g$, H545.12 had the lowest LAR with $3.30\;{\textrm{cm}^2/g}$. P 3144 had the largest LAI, DeKalb strain including DK 713 were larger apparently than Limagrain strain including HC 7466 with 3.15. 6. The RGR of testing varieties was little difference of statistical significantly, but DK 501, and HC 7466 were lower than other corn hybrids. The CGR of native and American varieties was no apparent differences, but that of Limagrain strains were a large variation. According to the results obtained by this experiment, the eary growth such as emergence rate and RBSDV infection rate of Limagrain strains was more excellent than other strains. P 3156, P 3352, P 3144w, DK 713 and HC 7466 were suitable for silage condition such as dry matter yield, percentage of dry matter and % ear to total dry matter. The fresh and dry matter yield of native corn hybrids such as Suwon 19 and Kwanganok were not apparent differences as compared with imported corn hybrids, but percentage of dry matter was lower than other imported corn hybrids.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.5 s.48
• /
• pp.463-473
• /
• 2000

This paper presents the results of the experimental and analytical investigation for the fatigue strength of welded details frequently used in steel bridges, especially for the details with relatively lower fatigue strength. The welded details included four kinds of welded details corresponding to the categories C, D, E and E' which represent the flange attachment details, web attachment details, transverse stiffeners and cover-plate details. Tensile fatigue tests were performed. The test results were compared with other available test results and the fatigue criteria of AASHTO, JSSC and Eurocode specifications. Generally, our test results were well agreed with other test results and satisfied with above-mentioned fatigue design provisions. However, it was found that transversely loaded weld-details showed lower fatigue strength than longitudinally loaded weld-details in transverse stiffener detail, and the test results of those details were not satisfied with AASHTO fatigue provisions. Examining the effect of length of gusset plate attachment details, welded details with longer attachment showed relatively lower fatigue strength, especially for the out-of-plane gusset plate details. It is recommended to perform additional fatigue tests with various loading and detail parameters and to establish the more detailed fatigue categories such as Eurocode or JSSC