• 해양환경안전학회지
• /
• 제21권6호
• /
• pp.729-736
• /
• 2015

본 논문에서는 Goal-Driven Optimization(GDO)을 바탕으로 한 양방향 차도선의 차량갑판의 구조설계에 대하여 최적화를 수행하였다. 차량갑판의 강도와 변형에 대한 영향을 검토하여 경제적 비용을 절약할 수 있는 최적점을 결정하였다. 실험계획법(DOE)과 반응표면법을 바탕으로 한 갑판두께를 110% 증가시켜 차량갑판의 강도와 강성을 높일 수 있었다. 이 결과에 대한 회귀분석을 수행하여 3차 다항식 모형인 최적 회귀모형식으로 제안하며 결정계수 $R^2$ 0.98정도로 나타내어 신뢰성을 확보할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.421-426
• /
• 1998

Current code provisions for the development of positive moment reinforcement is reviewed and criticized in this paper. Both the flexural bond and development length concepts are neccesary to consider anchorage requirement of reinforcement at beam ends. The curent design codes show unconservatism for the detailing of reinforcement at the beam ends. This study proposes a new design formula for the development of positive moment reinforcement.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(2)
• /
• pp.897-902
• /
• 1998

국내 경수로 원자력발전소 가압기는 안전성향상을 위하여 보다 많은 배관과 부수적인 배관이 설치 될 수 있다. 이에 따라 ASME 코드의 공식에 의한 설계(Design by Formula)보다는 해석에 의한 설계 (Design by Analysis)의 필요성이 증가하고 있다. 본 논문에서는 한국 표준형 원자로의 가압기 헤드 및 노즐에 대하여 ASME 코드의 해석에 의한 설계를 적용하여 범용유한요소 코드인 IDEAS로 응력해석 하고 구조적 건전성을 분석, 고찰하였다. 또한 해석결과에 따른 가압기헤드, 노즐 그리고 노즐보강에 대한 설계시 고려되어야 할 인자를 분석하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.843-846
• /
• 2008

Rationality of strength models for structural concrete depends on how to treat loads on boundaries and load paths within members. Differentiation between strut-and-tie models and stress fields approaches for shear strength models is discussed in this paper for salient use of current design formula in design code provisions. How to model configuration of loads and stress states along the boundary for the regions under provides a key to realistic construction of stress fields together with STM.

• 한국항해학회지
• /
• 제25권4호
• /
• pp.361-369
• /
• 2001

This thesis describes the design of a stabilized algorithm for shipboard satellite antenna systems which can enhance the tracking performance. In order to overcome some drawbacks of the conventional step tracking algorithm, the proposed algorithm searches for the best tracking angles using gradient-based formulae and signal intensities measured according to a search pattern. The effectiveness of the proposed algorithm is demonstrated through simulation using real-world data.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1157-1159
• /
• 2003

The effect of the scan velocity modulation is studied. The effect of the velocity modulation on the picture image is judged from the intensity profile of the image. The intensity profile is obtained as time integral of moving Gaussian beam. To confirm the applicability of this integral formula, the measurement and simulation data is compared. And by calculating the intensity profile for different amounts of velocity modulation, the optimum modulation displacement that gives the best image quality is obtained. This optimum modulation displacement can be used in designing scan velocity modulation system.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권6호
• /
• pp.268-271
• /
• 2004

An analytic design formula is proposed for a TEM mode dielectric bandpass filter with attenuation poles at desired frequencies in the stop band. In order to sustain the constant ripple in the passband due to attenuation poles, the initial resonant frequencies of the various resonators adopted in a filter with attenuation poles are newly calculated. The proposed design theory is verified by designing various bandpass filters with attenuation poles in the stop band.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.345-345
• /
• 2000

This paper introduces a new design approach for robust sliding-mode control of a class of mismatched uncertainties. For this, we propose a design method of sliding-mode surface using eigenstructure assignment to be insensitive to perturbation in sliding-mode systems, and also find a formula which is shown bounds of mismatched uncertainties for stability of the system. Simulation results are given to illustrate the approach proposed in this paper.

• International Journal of Concrete Structures and Materials
• /
• 제11권2호
• /
• pp.275-284
• /
• 2017

A formula to estimate the yield displacement observed in the pushover analysis of coupled wall lateral force-resisting systems is presented. The estimate is based on the results of an analytical study of coupled walls ranging from 8 to 20 stories in height, with varied amounts of reinforcement in the reinforced concrete coupling beams and walls, subjected to first-mode pushover analysis. An example illustrates the application of these estimates to the performance-based seismic design of coupled walls.

• 한국공작기계학회논문집
• /
• 제12권1호
• /
• pp.101-110
• /
• 2003

Motorcycle industry, for its competitive position, depends on part design technology. This part design has a bulky amount of data and asks the accumulation of advanced technical skill and experience, and fragmentary technical application is not enough to get to the kernel of a problem. Therefore, the improvement of proper productivity - the starting point of engineering design - and useful Design Methodology for products manufacturing are needed. Thus this paper is aimed to create a program that outputs dynamic characteristics of a vehicle when the data from fully understanding on motorcycle's brake system and induced formula for brake design are inputted. This paper is intended to show a creative design method by the thermal analysis data through FEM study and using shape design parameters derived from our programs.