• 한국철도학회논문집
• /
• 제19권2호
• /
• pp.187-194
• /
• 2016

철도교량의 신뢰도 기반 한계상태설계법 도입 시 목표신뢰도지수 산정을 위하여 기존 철도교량의 신뢰도지수 산정이 선행되어야 한다. 대표적인 복선 철도교량 중 하나인 6주형 PSC-I형 거더교량에 대해 신뢰도지수를 산정하였다. 최외측 거더의 휨모멘트에 대한 신뢰도 해석을 수행하였다. 휨저항강도 및 고정하중효과는 도로교 한계상태설계법 도입 시 적용된 선행연구자들의 평균과 변동계수를 활용하였고, 열차의 활하중 효과는 여객/화물 혼용선 중 중량화차 통행이 빈번한 중앙선에서 현장계측 데이터를 활용하였다. 한계상태방정식에 대하여 개선된 일계이차 모멘트법(AFOSM)으로 신뢰도 분석을 수행하였으며, 하중효과와 저항효과의 각 요소가 신뢰도지수에 미치는 민감도를 분석하여 중요도를 검토하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.309-314
• /
• 2007

Recently, the LRFD and the PSF based on structural reliability assessment have been applied to NPP designs in behalf of the conventional deterministic design methods. In the risk-informed structural integrity, it is especially possible to optimize design procedures considering cost, manufacturing and maintenance because the structural reliability concepts have confirmed the reliability for which a designer aims. Generally, in order to evaluate the PSF, the LRFD which is the design concept for evaluating safety factors respectively on the limit state function including load and resistance. This study certifies the concept and its applications of the PSF using the LRFD based on the structural reliability engineering.

• Geomechanics and Engineering
• /
• 제22권5호
• /
• pp.433-439
• /
• 2020

Tunnels are one of the most important constructions in civil engineering. The damage to these structures caused enormous costs. Therefore, the safe and economic design of these structures has long been considered. However, both applied loads on the tunnels as well as the resistance of the structural members are naturally uncertain parameters, hence, the design of these structures requires considering the probabilistic approaches. This study aims to determine the load and resistant factors of lining tunnels concerning the earthquake extreme events limit state function. For this purpose, tunnels that have been designed according to the previous design codes (AASHTO Tunnel LRFD 2017) and using reliability analysis, the optimum reliability of these structures for different loading scenarios is determined. In this paper, the tunnel is considered circular. Finally, the proper load and resistance factors are calculated corresponding to the obtained target reliability. Based on the performed calibration earthquake extreme events limit state function, the result of this study can be recommended to AASHTO Tunnel LRFD 2017.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.187-190
• /
• 2005

In this study, the reliablility based design optimization is peformed for an aircraft wing. The flexiblility of the wing was assumed by considering the interaction modeled by static aeroelasticity between aerodynamic forces and the structure. For a multidisciplinary design optimization the results of aerodynamic analysis and structural analysis were included in the optimization formulation. The First Order Reliability Method(FORM) was employed to consider the uncertainty of the designed points.

• Structural Engineering and Mechanics
• /
• 제50권3호
• /
• pp.305-322
• /
• 2014

Reliability-based design limit states and associated partial load factors provide a consistent level of design safety across bridge types and members. However, limit states in the current AASHTO LRFD have not been developed explicitly for the situation encountered by integral abutment bridges (IABs) that have unique boundary conditions and loads with inherent uncertainties. Therefore, new reliability-based limit states for IABs considering the variability of the abutment support conditions and thermal loading must be developed to achieve IAB designs that achieve the same safety level as other bridge designs. Prestressed concrete girder bridges are considered in this study and are subjected to concrete time-dependent effects (creep and shrinkage), backfill pressure, temperature fluctuation and temperature gradient. Based on the previously established database for bridge loads and resistances, reliability analyses are performed. The IAB limit states proposed herein are intended to supplement current AASHTO LRFD limit states as specified in AASHTO LRFD Table 3.4.1-1.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권4호
• /
• pp.217-224
• /
• 2003

본 연구에서는 구조 응답의 불확실성을 고려하여 신뢰성해석을 수행한 후 구조물의 최적설계를 수행하기 위한 프로그램 기법을 제안하고자 한다. 신뢰성해석을 위해 AFOSM법을 이용하였으며, 해석에 의한 파괴확률과 신뢰도 지수값을 제약조건으로 이용하여 최적설계를 수행하였다. 최적설계방법으로는 최적정기법으로 가장 강력한 SQP법을 사용하였다. 제약조건과 불확실량 고려 유 무에 따른 해석결과 본 연구에서 대상으로 한 트러스의 경우 불확실량을 고려한 경우 최소중량이 20.92%, 평면골조의 경우 평균 8.08% 증가하였다.

• 한국항공우주학회지
• /
• 제36권12호
• /
• pp.1193-1200
• /
• 2008

신뢰성 분석과 고장형태 및 영향분석(FMEA)으로 구성된 신뢰성 설계 절차를 정립하고, 극소형 위성 발사를 위한 공중발사 로켓, 미리내 II의 신뢰도 분석을 수행하였다. 신뢰성 분석 결과를 이용하여 미리내 II가 주어진 운영환경 내에서 임무시간동안 목표 궤도 진입이 가능한지를 분석하였다. 신뢰성 분석 과정에서는 작업분류체계(WBS)를 이용하여 시스템을 목록화 하였으며, 시스템의 작동개념도를 바탕으로 신뢰도 블록 선도(RBD)를 정립하여 신뢰성 구조를 파악하였다. FMEA를 통하여 구성품 및 부품들의 위험 우선순위를 판단하였고 위험도가 높은 구성품 및 부품들을 설계 변경한 결과, 목표 신뢰도를 만족하였으며 위성이 목표 궤도에 안전하게 진입될 수 있는 신뢰성 설계를 수행하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.212-221
• /
• 2022

이 연구에서는 국내 도로교량 평가에서도 설계와 일관성이 있도록 한계상태설계법에 상응하는 평가방법을 마련하고, 선진국과 같이 평가에서 목표신뢰도지수를 감소시키는 경우 신뢰도분석을 통하여 보정하여 평가 활하중계수를 제안한다. 국내 대표 교량형식을 대상으로 수집한 실교량 자료를 활용하여 각 설계기준 별 설계활하중에 대한 하중효과를 산정하여 비교한다. 현행 설계법에 의해 산정된 하중효과를 바탕으로 최소요구강도를 산정하여 이에 대한 신뢰도분석을 통해 활하중계수 보정을 수행한다. 설계수준에 비하여 낮춰진 평가수준의 활하중계수를 교량 안전성평가를 수행하고, 이전 설계법의 안전성평가 결과와 비교하여 평가결과가 증가함을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.508-518
• /
• 2008

Reliability and sensitivity analysis of the design parameters for a section of caisson type quaywall which is the most applicable in Korea were performed. It was tried to estimate probabilities of failure for the system of the multiple failure modes and to analyze LCC in the quaywall structure. The reliability analysis was performed by FORM. Also, sensitivity indices were estimated using the reliability indices, which may be used inferring effects of each design parameter on the reliability indices. As a result, the coefficient of friction between caisson and rubble, the moment by self weight and the moment of resistance mostly affected on the reliability indices in the sliding, overturning and foundation failure, respectively. System reliability theorem was applied in order to estimate the probabilities of failure for the system of the multiple failure modes. As the results of estimation of the probabilities of failure for the system, all cases were more conservative than those for the elements, according to both failure mode and load combination applied to series system. It entirely exceeded the target reliability index, but it was consistent with the theorem. According to the optimum LCC with the width of the caisson, the probability of failure exceeded the target probability of failure at then time. Therefore, it was judged to be insufficient to the practical application.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.8-19
• /
• 1997

In this study an adequate type of offshore structure at the Sakhalin region as cold region is proposed and its structural design results are presented based on the reliability analysis. Structural safety assessment has been carried out for the proposed offshore structure at the Sakhalin area as designed by the reliability method. And a rational design procedure is presented based on the reliability analysis. Followings are drawn through the present study : - Four colum TLP structure is proposed as an adequate offshore structure type at the cold region like the Sakhalin region and the reliability-based structural design results are presented. It is seen that the proposed type is a more adequate and economic than the fixed type. - Safety assessment of the proposed structure applying the extended incremental load method is performed. - Referring the allowable safety level for offshore structures it has been found present TLP structure has sufficient structural safety at the system level as well as at the component level.