• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.16-23
• /
• 2012

At present, the significance of a new manufacturing system that can shift from 'mass production' and consider life cycles of a product is pointed out and extremely expected. In such a situation, it is recognized that the modular design, often called 'unit design,' is the important design methodology which realizes the new production system enabling 'cost reduction,' 'flexible production of a multi-functional artifact,' 'settlement of an environmental issue,' and so on. A module (unit) of a product is generally defined as 'the parts group made into the sub-system from a certain specific viewpoint.' So far, there have been many researches related to the modular design. However, they are often limited to a certain viewpoint (objective). This paper proposes a simple but effective method for multi-objective modular design. In the proposed method, a new design metric, called similarity index, is proposed to evaluate the modular design candidates from the multiple viewpoints.

• Journal of radiological science and technology
• /
• v.46 no.2
• /
• pp.151-157
• /
• 2023

The purpose of this study was to develop an assist device that could correct and support patient position during biopsy on computed tomography (CT) using 3D printing technology. The development method was conducted in the order of 3D design, 3D output, intermediate evaluation for product, final assist device evaluation. The 3D design method was conducted in the order of prior research data survey, measurement, primary modeling, 3D printing, output evaluation, and supplementary modeling. The 3D output was the 3D printer (3DWOX 2X, Sindoh, Korea) with additive manufacturing technology and the polylactic acid (PLA) materials. At this time, the optimal strength was evaluated to infill degree of product as the 3D printing factors into 20%, 40%, 60%, and 80%. The intermediate evaluation and supplementation was measured noise in the region of interest (ROI) around the beam hardening artifact on the CT images. We used 128-channel MDCT (Discovery 75 HD, GE, USA) to scan with a slice thickness of 100 kVp, 150 mA, and 2.5 mm on the 3D printing product. We compared the surrounding noise of the final 3D printing product with the beginning of it. and then the strength of it according to the degree of infill was evaluated. As a result, the surrounding noise of the final and the early devices were measured at an average of 3.3 ± 0.5 HU and 7.1 ± 0.1 HU, respectively, which significantly reduced the noise of the final 3D printing product (p<0.001). We found that the percentage of infill according to the optimal strength was found to be 60%. Finally, development of assist devices for CT biopsy will be able to minimize artifacts and provide convenience to medical staff and patients.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.97-104
• /
• 2007

In this paper, we have proposed an integrated aircraft development environment which can support virtual design and development for Systems Engineering and IPPD(Integrated Product and Process Development). We have also proposed the ViMS(Virtual Mockup System) which can perform a system design review on an integrated aircraft development environment. The ViMS is an integrated virtual design support system with immersive design review functionality to make a virtual mockup instead of a physical mockup through the virtual reality technology. The functionality of the ViMS consists design data management, design technology, design verification, and design assessment. We have described the detailed development artifact, case studies and conclusions of using the ViMS functionality.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.3
• /
• pp.369-378
• /
• 2015

Various forms of wearable bio-signal monitoring systems have been developed recently. Acquisition of stable bio-signal data for health care purposes needs to be unconscious and continuous without hindrance to the users' daily activities. The garment type is a suitable form of a wearable bio-signal monitoring system; however, motion artifacts caused by body movement degrade the signal quality during the measurement of bio-signals. It is crucial to stabilize the electrode position to reduce motion artifacts generated when in motion. The problems with motion artifacts remain unresolved despite their significant effect on bio-signal monitoring. This research creates a foundation for the design of garment-type wearable systems for everyday use by finding a method to reduce motion artifacts through modular design. Two distinct garment-type wearable systems (tee-shirt with a motion artifact-reducing module (MARM) and tee-shirt without a MARM) were designed to compare the effects of modular design on the measurement of heart activity in terms of electrode position displacement, signal quality index value, and morphological quality. The tee-shirt with MARM showed superior properties and yielded higher quality signals than the tee-shirt without MARM. In addition, the tee-shirt with MARM showed a better repeatability of the heart activity signals. Therefore, a garment design with MARM is an efficient way to acquire stable bio-signals while in motion.

• Asia pacific journal of information systems
• /
• v.29 no.3
• /
• pp.503-523
• /
• 2019

Many cities in the world have increased initiative to realize smart tourism. There are unexplored challenges for the people which lead and manage smart tourism projects and realize its value in tourism (we call them as 'Smart tourism initiatives'), such as orchestrating of tourism complexity, developing and sharing tourism strategy, sustaining tourism projects and innovation. Concerning these challenges, we aim to design a holistic capability maturity model for sustainable and smart tourism governance enabling sustainable tourism innovations via tackling the challenges above. We adopted Dynamic capability theory as a theoretical lens and introduced Design science research methodology in order to develop a new capability maturity governance model as a design artifact. As a result of the study, we could synthesize findings from iterations of the design research cycle based on the IT Capability Maturity Model. Our result proposes a potential capability maturity model supporting effective communication and strategic alignment for the initiatives with illuminating future paths with evaluation methods on tourism capabilities for the initiatives. Throughout this study, we contribute to the body of knowledge as well as practice by proposing a new tourism capability governance model.

• Archives of design research
• /
• v.15 no.1
• /
• pp.399-406
• /
• 2002

There have been diverse discourses arguing that new design has been emerging in the 21 st century. However, there have been very few trials to identify systematically the characteristics_of new design paradigm and to develop new design educational program based on them. Thus, this paper aims at development of strategy of new design educational program according to the characteristics of new design paradigm. At first, design is viewed as part of 'culture'and the structure of culture is identified: 'Artifact', 'Value', and 'Basic Assumptions'. Similarly, design is found to comprise of three fundamental attributes: 'Function', 'Aesthetics','Symbolic'. These levels are shown to be in the relation of mutually recycling influences. These structural framework is used to understand the design methods and qualification of designers over the development of design paradigms: vernacular design, machine age, and information-knowledge age. The result leads the list of requirements of new educational design program: 'Human-Centered','Situation-Based','User-Participatory', and 'Intangible'. The model of strategy of new educational design program is developed and proposed.

• Journal of Korea Multimedia Society
• /
• v.23 no.3
• /
• pp.402-411
• /
• 2020

Power line noise in electrocardiogram signals makes it difficult to diagnose cardiovascular disease. ECG signals without power line noise are needed to increase the accuracy of diagnosis. In this paper, it is proposed DNN(Deep Neural Network) model to remove the power line noise in ECG. The proposed model is learned with noisy ECG, and clean ECG. Performance of the proposed model were performed in various environments(varying amplitude, frequency change, real-time amplitude change). The evaluation used signal-to-noise ratio and root mean square error (RMSE). The difference in evaluation metrics between the noisy ECG signals and the de-noising ECG signals can demonstrate effectiveness as the de-noising model. The proposed DNN model learning result was a decrease in RMSE 0.0224dB and a increase in signal-to-noise ratio 1.048dB. The results performed in various environments showed a decrease in RMSE 1.7672dB and a increase in signal-to-noise ratio 15.1879dB in amplitude changes, a decrease in RMSE 0.0823dB and a increase in signal-to-noise ratio 4.9287dB in frequency changes. Finally, in real-time amplitude changes, RMSE was decreased 0.3886dB and signal-to-noise ratio was increased 11.4536dB. Thus, it was shown that the proposed DNN model can de-noise power line noise in ECG.

• Journal of Biomedical Engineering Research
• /
• v.37 no.5
• /
• pp.153-160
• /
• 2016

This study proposes an algorithm for removal of CPR artifact in order that automated external defibrillator (AED) can effectively diagnose ECG rhythm during cardiopulmonary resuscitation (CPR). Current AED required to interrupt chest compression for reliable rhythm analysis to avoid the effect of artifacts produced by CPR. However even temporarily interruption of chest compression during CPR adversely affects the probability of restoration of spontaneous circulation (ROSC) and survival after the delivery of the shock. Therefore, we proposed a method for removal of CPR artifacts using least mean square (LMS) filter. The removal of the CPR artifacts would enable compressions to continue during AED rhythm analysis, thereby increasing the likelihood of resuscitation success. It was tested on 31 segments of shockable and 300 segments of non-shockable ECG signals recorded from three pigs during CPR. In the result, sensitivity (Se) and specificity (Sp) analysis on the test segments showed values of Se = 3.2%, Sp = 66.0% and Se = 96.8%, Sp = 98.7% in the case of unfiltered and filtered signals during CPR. In conclusion, it was shown that the proposed method can be a useful tool to exactly diagnose the ECG rhythm during the CPR.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.121-132
• /
• 2005

In the formation of images in a camera, the exposure time is appropriately adjusted to obtain a good image. Hence for a successful alignment of a sequence of images to the same scene, it is required to compensate the different exposure times. If we have no knowledge regarding the exposure time, then we should develop an algorithm that can compensate an image with respect to a reference image without using any camera formation models. In this paper, an exposure compensation is performed by designing predictors based on the conditional expectation between the reference and input images. Further, an adaptive predictor design is conducted to manage the irregular exposure or histogram problem. In order to alleviate the blocking artifact and the overfitting problems in the adaptive scheme, a smoothing technique, which uses the pixels of the adjacent blocks, is proposed. We successfully conducted the exposure compensation using real images obtained from digital cameras and the transmission electron microscopy.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.6
• /
• pp.1177-1192
• /
• 2023

This study aims to expand the scope of use for relics by applying the patterns and characteristics of embroidered fabric pieces, such as gold foil, excavated from the Mireuksa Temple Site in Iksan for fashion products. The artifact was a ra decorated with flower and vine patterns, embroidery using gold and red thread, and the unique stitching of Baekje. The pattern was reconstructed, as the embroidery was not well-preserved. This study used two types of gold-foil techniques: laser-cut and stone-stamp gold foil. Considering practicality, the gloss, toughness, custom production possibility, and design implementation were emphasized. The form of the laser-cut gold foil could be transformed; however, a recognition problem with the machine increased the thickness of the stitching. It was used for half-finished goods and commercial casual fashion. The stone-stamp gold foil was finely implemented, but the design was difficult to change. It was used for half-finished silk fabric for making hanbok po and lattice-patterned silk skirts. Applying the developed gold foil to suitable clothing can further enhance the effect.