• Korean Journal of Social Welfare
• /
• v.58 no.2
• /
• pp.273-302
• /
• 2006

The introduction of cash payments for care is a distinct trend that characterizes changes in care policies since the 1990s. Recently, many developed countries have newly introduced or extended cash payments for care that allow care users to be able to plan themselves for their cares instead of receiving direct care services from the state. Cash payments for care can be said to be one of the alternative policies by which user choices are extended, and it becomes possible to establish demand-cantered care delivery systems more economically and effectively, hence addressing the issue of the financial limitations and rigid systems that are common in modern welfare states, which make it difficult to response to various needs. However, the design and administration of cash for care vary across different countries. Such variations of cash for care policies influence on the combination of consumerism (based on liberal market values intrinsic in the care market) and citizenship based on social solidarity. Those variations eventually produce impacts on the balance of responsibilities and the roles of families, the state and market regarding care in other words, balancing of welfare pluralism. This paper has attempted to find general meanings and particularity of cash for care polices in modem welfare states by means of looking at the characteristics of cash for care policies of four different countries (Netherlands, France, Germany and Italy) and their impacts on their care market. If the four countries are ranked by the degree that they emphasize citizenship in light with social rights, the Netherlands, France, Germany and Italy could be placed in due order. From an economic point of view and in terms of cost containment, those countries will be placed in an inverse order, It is apparent that in the course of planting cash for care policies in the existing social systems involving different socio-cultural conditions and labour markets, sometimes more emphasis is placed on the citizenship of care users, family carers and care providers than on cost containment issue, and sometimes vice versa. Behind this lies the process of different social valuation on what care is about; who can better deliver care; who should be responsible for care; how responsibilities should be shared and so on.

• Clean Technology
• /
• v.24 no.2
• /
• pp.127-134
• /
• 2018

To reduce the environmental pollution by $NO_x$ from ship engine, International maritime organization (IMO) announced Tier III regulation, which is the emmision regulation of ship's exhaust gas in Emission control area (ECA). Selective catalytic reduction (SCR) process is the most commercial $De-NO_x$ system in order to meet the requirement of Tier III regulation. In generally, commercial ceramic honeycomb SCR catalyst has been installed in SCR reactor inside marine vessel engine. However, the ceramic honeycomb SCR catalyst has some serious issues such as low strength and easy destroution at high velocity of exhaust gas from the marine engine. For these reasons, we design to metallic structured catalyst in order to compensate the defects of the ceramic honeycomb catalyst for applying marine SCR system. Especially, metallic structured catalyst has many advantages such as robustness, compactness, lightness, and high thermal conductivity etc. In this study, in order to support catalyst on metal substrate, coating slurry is prepared by changing binder. we successfully fabricate the metallic structured catalyst with strong adhesion by coating, drying, and calcination process. And we carry out the SCR performance and durability such as sonication and dropping test for the prepared samples. The MFC01 shows above 95% of $NO_x$ conversion and much more robust and more stable compared to the commercial honeycomb catalyst. Based on the evaluation of characterization and performance test, we confirm that the proposed metallic structured catalyst in this study has high efficient and durability. Therefore, we suggest that the metallic structured catalyst may be a good alternative as a new type of SCR catalyst for marine SCR system.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.1
• /
• pp.105-116
• /
• 2017

Murals in villages revitalize communities and spaces, and are economically efficient. Central and local governments are therefore actively undertaking Mural Village Projects but there are some issues and concerns about the projects for the provision of uniformed landscapes for the regions that are the result of a short-term completion of projects, and instead of cohesion, cause destruction of place identities. In addition, the problem of sustainable landscape management that is the result of low community involvement can be pointed out because the murals are products of government-led projects. The study covered the context of landscape and space change processes from a critical perspective, and focused on Ihwa-dong Mural Village, which is considered the first mural village in Korea and has begun to undergo drastic changes due to attention received from media. The purposes of this study are as follows. First, the study provides data about difference of place identity perception and landscape preference between residents and tourists in Ihwa-dong Mural Village. Second, this paper evaluates the current Mural Village Projects and finds alternative directions to improve the projects by using these data. This paper analyzed tourist hot spots in Ihwa-dong Mural Village by using SNS analysis, a field study and focus group interviews. The difference of place identity perception and landscape preference was examined among three groups: residents, new residents who are invited by Mural Village Projects, and tourists. This study showed that many tourists are focused on landscape areas that were not intentionally constructed projects. In addition, the locations of preferred landscapes and stores overlapped. Meanwhile, using qualitative data analysis, it was found that residents perceived the area as being an under-privileged location, while the murals, a non-daily landscape, largely affected place identity perception of new residents and tourists. For landscape preference, tourists preferred outdoor rest areas, while new residents and residents preferred less. Additionally, new residents and tourists preferred an area's night view while residents made no mention of this. Related to the direction of the projects, three groups showed their dependence on the government. This empirical study is significant from a participatory design perspective and in analyzing the issues for mural villages' landscapes, which are spreading across the nation and proceeding without criticism in urban regeneration. Implications for urban planners and suggestions for the future projects are given.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.182-190
• /
• 2005

The fiber Raman amplifier(FRA) is a distinctly advantageous technology. Due to its wider, flexible gain bandwidth, and intrinsically lower noise characteristics, FRA has become an indispensable technology of today. Various FRA modeling methods, with different levels of convergence speed and accuracy, have been proposed in order to gain valuable insights for the FRA dynamics and optimum design before real implementation. Still, all these approaches share the common platform of coupled ordinary differential equations(ODE) for the Raman equation set that must be solved along the long length of fiber propagation axis. The ODE platform has classically set the bar for achievable convergence speed, resulting exhaustive calculation efforts. In this work, we propose an alternative, highly efficient framework for FRA analysis. In treating the Raman gain as the perturbation factor in an adiabatic process, we achieved implementation of the algorithm by deriving a recursive relation for the integrals of power inside fiber with the effective length and by constructing a matrix formalism for the solution of the given FRA problem. Finally, by adiabatically turning on the Raman process in the fiber as increasing the order of iterations, the FRA solution can be obtained along the iteration axis for the whole length of fiber rather than along the fiber propagation axis, enabling faster convergence speed, at the equivalent accuracy achievable with the methods based on coupled ODEs. Performance comparison in all co-, counter-, bi-directionally pumped multi-channel FRA shows more than 102 times faster with the convergence speed of the Average power method at the same level of accuracy(relative deviation < 0.03dB).

• Journal of Intelligence and Information Systems
• /
• v.22 no.4
• /
• pp.19-43
• /
• 2016

This study examines the causes of the Asian exchange rate crisis and compares it to the European Monetary System crisis. In 1997, emerging countries in Asia experienced financial crises. Previously in 1992, currencies in the European Monetary System had undergone the same experience. This was followed by Mexico in 1994. The objective of this paper lies in the generation of useful insights from these crises. This research presents a comparison of South Korea, United Kingdom and Mexico, and then compares three different models for prediction. Previous studies of economic crisis focused largely on the manual construction of causal models using linear techniques. However, the weakness of such models stems from the prevalence of nonlinear factors in reality. This paper uses a structural equation model to analyze the causes, followed by a neural network model to circumvent the linear model's weaknesses. The models are examined in the context of predicting exchange rates In this paper, data were quarterly ones, and Consumer Price Index, Gross Domestic Product, Interest Rate, Stock Index, Current Account, Foreign Reserves were independent variables for the prediction. However, time periods of each country's data are different. Lisrel is an emerging method and as such requires a fresh approach to financial crisis prediction model design, along with the flexibility to accommodate unexpected change. This paper indicates the neural network model has the greater prediction performance in Korea, Mexico, and United Kingdom. However, in Korea, the multiple regression shows the better performance. In Mexico, the multiple regression is almost indifferent to the Lisrel. Although Lisrel doesn't show the significant performance, the refined model is expected to show the better result. The structural model in this paper should contain the psychological factor and other invisible areas in the future work. The reason of the low hit ratio is that the alternative model in this paper uses only the financial market data. Thus, we cannot consider the other important part. Korea's hit ratio is lower than that of United Kingdom. So, there must be the other construct that affects the financial market. So does Mexico. However, the United Kingdom's financial market is more influenced and explained by the financial factors than Korea and Mexico.

• The Korean Journal of Community Living Science
• /
• v.16 no.4
• /
• pp.47-57
• /
• 2005

To investigate the characteristics of edible flowers as a food material, we have examined the kinds, colors, sizes, fresh weights, pigments and shipping periods of edible flowers marketed on the cropping farms, selling agencies and Internet shopping malls from February through September, 2005. Thirty six kinds of edible flowers were marketed in Korea, and all but the chrysanthemum were introduced species. The characteristics of edible flowers were shown differently by the varieties following the same kinds of flowers. Those colors were yellow (twenty five kinds), red (twenty three), pink (twenty), white (eighteen), and orange (sixteen). Flower diameters were measured and showed that seven kinds of edible flowers were 1.0 to 2.0cm, fourteen 2.0 to 3.0cm, sixteen 3.0 to 4.0cm, eight 4.0 to 5.0cm, and nine over 5.0cm. Flower fresh weights were measured as follows: twenty one kinds of edible flowers were under 0.5g ($58.3\%$), eight were $0.6\∼1.0g(22.2\%$), and six were $1.1{\∼}1.5g(16.7\%$). The taste of edible flowers was often bitter (twenty one kinds), sweet and sour (seven), somewhat fragrant (six), fishy (three), and others (nine). The pigments of edible flowers were anthoxanthin (twenty seven kinds), flavonoid (twenty three), carotenoid (seventeen), and betanidin (four).

• Management & Information Systems Review
• /
• v.31 no.4
• /
• pp.237-260
• /
• 2012

Purposes of this paper are focused on researching that employees in small and medium-sized construction company embraced green growth policy by Korean government's strong will and they have try to improve it to take advantage of strengths. Specifically, the purpose of this study includes: Firstly, to examine the effects of employee's cognition of green growth policy and their organizational commitment. Secondly, to examine the mediating and moderating effect of the policy trust and company trust between employee's cognition of green growth policy and organizational commitment. In addition, th examine the facilitating effect of employee's self-efficacy between company trust and organizational commitment. In order to verify the relationship, moderating and mediating effects, data were collected from 168 individuals in 19 small and medium sized company to test theoretical model and its hypotheses. Findings are as followed: first, the relationship between the cognition of green growth policy and organizational commitment is positively related. Second, the employee's company trust played as a partial mediator and moderator on the relationship between cognition of green growth policy and organizational commitment. Finally, employee's self-efficacy also played as a partial mediator on the relationship between company trust and organizational commitment. This study contributes to deepen our understanding of employee's organizational commitment by suggesting an alternative theoretical model regarding how the cognition of green growth policy and organizational commitment work to relate employee's company trust, and how the company trust and organizational commitment work to facilitate employee's self-efficacy. These results reveal that the study contributed to combining variables of employee's cognition of green growth policy, company trust, self-efficacy and organizational commitment, and expanded it.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.874-882
• /
• 2017

As the interest on the air-pollution is gradually rising up at home and abroad, automotiv e and fuel researchers have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward three main issues : evaporative, performance, air pollution. In addition, researcher studied the environment problems of the bio-ethanol, bio-butanol, bio-ETBE (Ethyl Tertiary Butyl Ether), MTBE (Methyl Tert iary Butyl Ether) fuel contained in the fuel as octane number improver. The researchers have many dat a about the health effects of ingestion of octane number improver. However, the data support the con clusion that octane number improver is a potential human carcinogen at high doses. Based on the bio-fuel and octane number improver types (bio-ethanol, bio-butanol, bio-ETBE, MTBE), this paper dis cussed the influence of gasoline fuel properties on the evaporative emission characteristics. Also, this p aper assessed the acceleration and power performance of gasoline vehicle for the bio-fuel property. As a result of the experiment, it was found that all the test fuels meet the domestic exhaust gas standards, and as a result of measurement of the vapor pressure of the test fuels, the bio - ethanol : 15 kPa and the biobutanol : 1.6 kPa. thus when manufacturing E3 fuel, Increasing the biobutanol content reduces evaporation gas and vapor pressure. In addition, Similar accelerating and powering performance was shown for the type of biofuel and when bio-butanol and bio-ethanol were compared accelerated perf ormance was improved by about 3.9% and vehicle power by 0.8%.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.6
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.5
• /
• pp.394-402
• /
• 2021

The entry of an aging society and the extension of human life expectancy, the increasing interest in women's social advancement and men's appearance, and the natural interest in K-culture through media media, while receiving worldwide attention, Focus on K-Bueaty. Recently, looking at the occupation of the medical tourism field, in the case of aesthetic medicine tourism such as molding and dermatology, it has gained popularity not only in Asia such as China and Japan, but also in North America and Europe. The first external confirmation of human aging is the wrinkles on the skin of the face. Clean, wrinkle-free, elastic and healthy skin is a desire of most people. Skin condition and condition such as focused ultrasonic stimulation (HIFU: High Intensity Focused Utrasound) and low frequency, high frequency (RF: Radio Frequency), galvanic therapy using microcurrent, cryotherapy using rapid cooling, etc. Depending on the method of management, the effect of the treatment differs depending on the output and the stimulation site, etc., even in the treatment of medical equipment and beauty equipment using the same mechanism. In this research, in order to develop invasive high-frequency dermatological devices using a large number of beauty medical devices and microneedles of beauty devices, the international standards IEC 60601-2 (standards for individual medical devices) and MFDS (Ministry of) We designed and developed a high-frequency output device in compliance with the high-frequency stimulation standard announced in the Food and Drug Safety (Ministry of Food and Drug Safety). The circuit design consists of an amplifier (AMP: Amplifier) using Class-A Topology and a power supply device using Half-Bridge Topology. As a result of measuring the developed high-frequency output device, an average efficiency of 63.86% was obtained, and the maximum output was measured at 116.7W and 50.67dBm.