• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.831-837
• /
• 2015

Many persons and electronic devices are exposed to electromagnetic (EM) waves generated from magnetic resonance imaging (MRI) equipment, EM pulses (EMPs), and many other kinds of EM wave devices. Finger strips are used to provide shielding from these EM waves. Because of the high thermal conductivity of finger strips, they are used in the design of specialized doors that are installed in shielded rooms. In this study, we perform an accelerated life test using the load acceleration stress, which affects the main failure mode of finger strips. We predict the life of the finger strip under normal usage conditions based on the results of the accelerated life test. We compare the results with those predicted from the life test under normal usage conditions to evaluate the validity of accelerated life testing.

• Journal of Korean Academy of Nursing Administration
• /
• v.17 no.4
• /
• pp.484-492
• /
• 2011

Purpose: The aims of study were; (1) to evaluate the validity and sensitivity of a fall-risk assessment tool, and (2) to establish continuous quality improvement (CQI) methods to monitor the effective use of the risk assessment tool. Methods: A retrospective case-control cohort design was used. Analysis was conducted for 90 admissions as cases and 3,716 as controls during the 2006 and 2007 calendar years was conducted. Fallers were identified from the hospital’s Accident Reporting System, and non-fallers were selected by randomized selection. Accuracy estimates, sensitivity analysis and logistic regression were used. Results: At the lower cutoff score of one, sensitivity, specificity, and positive and negative predictive values were 82.2%, 19.3%, 0.03%, and 96.9%, respectively. The area under the ROC was 0.60 implying poor prediction. Logistic regression analysis showed that five out of nine constitutional items; age, history of falls, gait problems, and confusion were significantly associated with falls. Based on these results, we suggested a tailored falls CQI process with specific indexes. Conclusion: The fall-risk assessment tool was found to need considerable reviews for its validity and usage problems in practice. It is also necessary to develop protocols for use and identify strategies that reflect changes in patient conditions during hospital stay.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.6
• /
• pp.627-636
• /
• 2009

The purpose of this study was to evaluate the validity of the second-order analysis using the load amplification factor suggested by design codes. For this purpose, the first-order analysis with the B1 and B2 factors suggested by KBC 2005 and the direct analysis with the load amplification factor suggested by KBC 2009 (draft) were performed for three-story -one-bay and five-story-three-bay unbraced steel frames. The results of the analyses were compared with the results of the second-order inelastic analysis to evaluate the validity of the suggested methods. The main parameters of the analysis were the scale of the frame, the axial load ratio of the column, and the methods of analysis. The research results showedthat the method suggested by KBC 2005 does not properly consider the second-order effect under the high axial load ratio, but the direct analysis method suggested by KBC 2009 (draft) properly estimates the second-order effect without any serious problem.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.2
• /
• pp.74-81
• /
• 2020

Objective: To prevent low back pain, an objective evaluation tool to evaluate pelvic mobility and exercise to improve the flexibility of the lumbar region is needed. The purpose of this study was to compare the results of pelvic mobility measurements using the Wii Balance Board (WBB) and Sensbalance Therapy Cushion (STC), evaluate the usefulness of the STC as a tool for measuring pelvic mobility. Design: Cross-sectional study. Methods: Fifty healthy subjects participated in this study. The subjects performed pelvic mobility range, proprioception, reaction time and reach of the arm using the STC. The pelvic movement parameter was measured two times to determine the intra-rater reliability. To measure the correlation between lumbar muscle tension and pelvic mobility, Myovision was used to measure tension of L4, L5 level erector spinae muscle. Correlations between measured variables were checked to determine the validity of the pelvic mobility assessment tool. Results: STC showed high test-retest reliability in pelvic tilt measurement and reaching task [intraclass correlation coefficients (3,1)=0.804-0.915]. The relationship between WBB and STC showed a significant positive correlation with the pelvic tilt and reaching task (p<0.05). Posterior tilt and erector spinae activation (Lt. L5) showed a significant negative correlation (p<0.05). Left, right tilt and erector spinae activation (L5) showed a significant negative correlation (p<0.05). Conclusions: This study confirmed the advantages of the STC and found efficiency as an objective measuring device of pelvic mobility.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.3
• /
• pp.317-324
• /
• 2015

The design of anchorage zone in a post-tensioned member has been started from the evaluation of the ultimate resisting capacity as well as the maximum bursting stress developed, and a lot of design codes including AASHTO and PTI describe their design equations to determine the bearing strength of concrete at the anchorage zone. However, these equations usually give conservative results because their derivation is based on the simple anchorage with a wide bearing plate in the surface without any additional consideration for the load transfer mechanism through transverse ribs on the anchorage. To assess the influence of geometric parameters related to the transverse ribs on the resisting capacity of anchorage block, experiments and analysis are conducted. After verifying the validity of numerical model conducted through correlation studies between experimental and analytical results, parametric studies with changes in the transverse ribs are followed and design recommendations for the anchorage block are suggested from the numerical results obtained.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.950-965
• /
• 2017

This present study proposed a newly developed test method to evaluate the dexterity and mobility of a firefighter's protective gloves. The first step evaluated the mobility and dexterity of the current type of fire protective gloves and three new types of protective gloves using Don-doff test, ASTM dexterity, Minnesota dexterity, Bennett hand tool test, and ASTM torque test. Three firefighters ($47.3{\pm}5.0yr$ in age, $178.6{\pm}2.9cm$ in height) participated in a series of experiments. The second step was to design and suggest an integrated test method based on the results of the first experiment. As a result of the first experiment, we concluded that 1) the mobility and dexterity tests for firefighting gloves should include both wet and dry tests, 2) The three kinds of dexterity tests could be integrated into one test, and 3) The don-doff test and the torque test should be independent from the newly developed integrated test. In summary, we suggested a simplified test method that combined ASTM dexterity, Minnesota dexterity, and Bennett hand tool test. The integrated system can reduce total time spent on dexterity tests and improve the validity of the test in terms of firefighters' manual work.

• Archives of design research
• /
• v.14
• /
• pp.87-106
• /
• 1996

Recent rapid development of electronic technologies and semiconductors has made it possible to perform diverse intelligent functions even in simple products. This technological sophistication, in turn, made it difficult to get required information on the usage of products by just its shape. Under these new circumstances, User-interface design became more important. However existing studies were mainly done with the emphasis of software development and focusing on the evaluation-stage after development of alternatives. This study sets the objective for developing modeling technique which can be applied to product design and the stage of concept development. At first the role of modeling was discussed to understand the nature of modeling. Then the existing techniques of modeling were reviewed for identifying advantages and limits. The review of existing modeling techniques revealed general objectives which new modeling techniques should fulfill. Based on objectives new modeling techniques were proposed. Following this new techniques, actual case of modeling a existing product were demonstrated to evaluate the validity of new technique and show the actual application. Finally findings were summarized and the limits of the study were identified.

• Journal of the Korean Home Economics Association
• /
• v.24 no.4
• /
• pp.147-162
• /
• 1986

This research has dual purposes. First, it was designed to determine the level of children's spatial environment in the residences, thereby, to make a vision for children's furniture as an industrial design product. Second, it was intened to find out the children's perceptual pattern toward the furniture, thereby to give some implications for future design development. For the second purpose, descriptors were screened with construct validity and their factor structure was identified. The subjects were 1,197 children from 1st grade of elemantary school through 3rd grade of middle school, and their 1,197 parents for the first purpose, and 560 children from 6th grades of elemantary school and 3rd grade of middle school for the second purpose. The first parts of findings were 1) present interests of parents of household above middle income level in Seoul in making their children's spatial environment desirable is quite high. 2) Space segregation stage in terms of physical and conceptual aspects showed very fast development, that is, there will have been very good changes for children's room to be a very well furnished and independent space for them. 3) Children's opinions were quite well reflected when purchasing the present furniture, and this tendency seemed to be more likely happend in future. These findings mentioned above gave and confirmed the visions for future children's furnished environment. The second parts of findings were such that the perceptual pattern for furniture by children showed aesthetic design appearance, functionality and durability, and the characteristic of line. This result impliated especially that designers should be every careful to manipulate or use the line of the furniture products. The 22 representative descriptors selected can be used as an evaluation instrument for furniture products.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.365-370
• /
• 2005

Many sea accidents such as collisions and groundings of vessels were occurred due to the lack of sufficient manoeuvring capability of vessels. Therefore IMO adopted 'The interim standards of ship manoeuvrability by Resolution A.751(18)' and the standards have been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless qf the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standards are divided into three kinds as bellows; (1) Turning capability standards : Estimated values in design stage are to be certified by turning circle test of the actual vessel. (2) Course keeping quality standards : Estimated values in design stage are to be certified by $10^{\circ}\;and\;20^{\circ}$ Zig-Zag tests of the actual vessel. (3) Shortest stopping distance standards : Estimated values in design stage are to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors computed the values of the manoeuvring standards of several vessels from their original design and compared them with those results from experiments of the model ships and also examined the values and concluded about the validity of IMO manoeuvrability standards.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.6
• /
• pp.128-137
• /
• 2023

In this study, the bearing pressure on the rubble mound of a gravity-based harbor structure with an arbitrarily shaped bottom was targeted. Assuming that the bottom of the structure is a rigid body, the rubble mound was modeled as a linear spring uniformly distributed on the bottom that resists compression only, and the bearing pressure evaluation formula was derived. It was confirmed that there were no errors in the derivation process by showing that when the bottom was square, the derived equation was converted to the equation used in the design. In addition, the validity of the derived equation was proven by examining the behavior and convergence value of the bearing pressure when an arbitrarily shaped bottom converges into a square one. In order to examine the adequacy of the method used in the current design, the end bearing pressure for the pre-designed breakwater cross-section was calculated and compared with the values in the design document. As a result, it was shown that the method used for design was not appropriate as it gave unsafe results. In particular, the difference was larger when the eccentricity of the vertical load was large, such as in the case of extreme design conditions.