• 한국정밀공학회지
• /
• 제26권8호
• /
• pp.142-147
• /
• 2009

Spinal fixation systems provide surgical versatility, but the complexity of their design reduces their strength and fatigue resistance. There is no published data on the mechanical properties of such screws. Screws were assembled according to a vertebrectomy model for destructive mechanical testing. A group of two assemblies was tested in static compression. One group was applied to surface a grit blasting method and another group was applied to surface a bead blasting method. Modes of failure, yield, and ultimate strength, yield stiffness, and cycles to failure were determined for six assembles. Static compression 2% offset yield load ranges was from 327 to 419N. Fatigue loads were determined two levels, 37.5% and 50% of the average load from static compression ultimate load. An assembly of bead blasting treatment only achieved 5 million cycles at 37.5% level in compression bending.

• Steel and Composite Structures
• /
• 제1권3호
• /
• pp.341-354
• /
• 2001

This paper provides a state-of-the-art review on advanced analysis models for investigating the load-displacement and ultimate load behaviour of steel and composite frames subjected to static gravity and lateral loads. Various inelastic analysis models for steel and composite members are reviewed. Composite beams under positive and negative moments are analysed using a moment-curvature relationship which captures the effects of concrete cracking and steel yielding along the members length. Beam-to-column connections are modeled using rotational spring. Building core walls are modeled using thin-walled element. Finally, the nonlinear behaviour of a complete multi-storey building frame consisting of a centre core-wall and the perimeter frames for lateral-load resistance is investigated. The performance of the total building system is evaluated in term of its serviceability and ultimate limit states.

• Computers and Concrete
• /
• 제6권1호
• /
• pp.41-57
• /
• 2009

This paper presents the details of a novel external prestressing technique for strengthening of concrete members. In the proposed technique, transfer of external force is in shear mode on the end block thus creating a complex stress distribution and the required transverse prestressing force is lesser compared to conventional techniques. Steel brackets are provided on either side of the end block for transferring external prestressing force and these are connected to the anchor blocks by expansion type anchor bolts. In order to validate the technique, an experimental investigation has been carried out on post-tensioned end blocks. Performance of the end blocks have been studied for design, cracking and ultimate loads. Slip and slope of steel bracket have been recorded at various stages during the experiment. Finite element analysis has been carried out by simulating the test conditions and the responses have been compared. From the analysis, it has been observed that the computed slope and slip of the steel bracket are in good agreement with the corresponding experimental observations. A simplified analytical model has been proposed to compute load-deformation of the loaded steel bracket with respect to the end block. Yield and ultimate loads have been arrived at based on force/moment equilibrium equations at critical sections. Deformation analysis has been carried out based on the assumption that the ratio of axial deformation to vertical deformation of anchor bolt would follow the same ratio at the corresponding forces such as yield and ultimate. It is observed that the computed forces, slip and slopes are in good agreement with the corresponding experimental observations.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.175-186
• /
• 2019

Number of studies on the buckling of thin cylindrical pressure vessels, such as submarine pressure hull and pipe with a large ratio of diameter/thickness, have been carried out in the naval and ocean engineering. However, research about thick cylinder pressure vessel has not been active except for the specific application in nuclear area. There are not many papers for the estimation of buckling and ultimate load capacity of thick cylinders for the deep sea usage. Thus, it is important to understand the theoretical bases of the buckling and collapse process and the derivation process of such loads for the proper design and structural analysis. The objective of this study is to survey the collapse behavior, to analyse and clarify the derivation procedure and to estimate the ultimate collapse load for thick cylinder by analyzing relevant books and papers. It is found that the yielding begins at the internal surface of the thick cylinder and plasticity develops from the internal surface to the external surface to generate collapse. Also the initial imperfection of cylinder develops flattening and consequently accelerates buckling and finally ultimate collapse. By comparing the collapse loads of aluminum thick cylinder by applying equations herein, it is shown that the equations analyzed are appropriate to obtain collapse load for thick cylinder.

• 풍력에너지저널
• /
• 제13권3호
• /
• pp.43-52
• /
• 2022

Although wind turbines have obtained type certification according to international standards and are released to the market, they cannot be regarded as design evaluations that consider site characteristics. Therefore, it is necessary to study the site-specific load analysis method based on the meteorological data measured at the candidate site. In this study, site-specific load calculation was performed based on the meteorological data from the Jeju Haengwon mast. Analysis results were compared and analyzed with the results calculated by IEC design Class (IIA). For the fatigue loads at the blade root and tower base, the site-specific condition was lower than the IEC IIA, but in the case of the ultimate load, the site-specific condition showed higher results in some design load cases (DLCs). Selecting a wind turbine suitable for a site through load evaluation considering site conditions can prevent the reduction of operation and maintenance (O&M) costs and the power loss caused by downtime. Finally, it is expected to contribute to the project's levelized cost of energy (LCOE) reduction.

• 한국도로학회논문집
• /
• 제17권6호
• /
• pp.37-45
• /
• 2015

PURPOSES : The purpose of this study is to validate the design criteria of the concrete modular road system, which is a new semi-bridge-type concept road, through a comparison of numerical analysis results and actual loading test results under static axial loads. METHODS : To design the semi-bridge-type modular road, both the bridge design code and the concrete structural design code were adopted. The standard truck load (KL-510) was applied as the major traffic vehicle for the design loading condition. The dimension of the modular slab was designed in consideration of self-weight, axial load, environmental load, and combined loads, with ultimate limit state coefficients. The ANSYS APDL (2010) program was used for case studies of center and edge loading, and the analysis results were compared with the actual mock-up test results. RESULTS : A full-scale mock-up test was successfully conducted. The maximum longitudinal steel strains were measured as about 35 and 83.5 micro-strain (within elastic range) at center and edge loading locations, respectively, under a 100 kN dual-wheel loading condition by accelerating pavement tester. CONCLUSIONS : Based on the results of the comparison between the numerical analysis and the full-scale test, the maximum converted stress range at the edge location is 32~51% of the required standard flexural strength under the two times over-weight loading condition. In the case of edge loading, the maximum converted stresses from the Westergaard equation, the ANSYS APDL analysis, and the mock-up test are 1.95, 1.7, and 2.3 times of that of the center loading case, respectively. The primary reason for this difference is related to the assumption of the boundary conditions of the vertical connection between the slab module and the crossbeam module. Even though more research is required to fully define the boundary conditions, the proposed design criteria for the concrete modular road finally seems to be reasonable.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.277-287
• /
• 1996

Based on the developments of the reliability-based steel structural analysis and design as well as the extending knowledgy on the probabilitic characteristics of loading and resistance the probability based design criteria have been successful Iy developed for many students. The existing design codes, which are genarally based on the structural theory and certain engineering experience, do not realistically consider the uncertainties of loads and resistance and the basic reliability concepts. It is recognized to develope the design criteria by ETCM(Expected Total cost Minimization). In this study, therefore, the proper probability based design criteria (Optimum load and resistance factor design formats ) has been developed based on the safety levels observed from calibration Iii th existing standards, which applies to the ultimate limit states of steel structural members.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.197-200
• /
• 2008

철근콘크리트 코벨은 전단지간대 유효깊이의 비가 1보다 작은 부재로서, 주로 보의 하중을 기둥으로 전달하기 위해 사용된다. 이러한 철근콘크리트 코벨의 극한강도 및 거동은 전단지간대 유효깊이의 비, 콘크리트의 압축강도, 철근의 배근형태와 배근량, 그리고 부재의 형상 등 다양한 변수들의 영향을 받는다. 본 연구에서는 이러한 철근콘크리트 코벨의 강도 및 거동 특성을 모두 반영하여 설계를 수행할 수 있는 부정정 스트럿-타이 모델을 제안하였다. 또한 현행 설계기준의 스트럿-타이 모델방법을 부정정 스트럿-타이 모델을 이용한 철근콘크리트 코벨의 설계에 합리적으로 적용하기 위해 수평 트러스 메커니즘에 의해 전달되는 하중의 크기 즉 부정정 스트럿-타이 모델의 하중분배율을 제안하였다. 제안한 하중분배율을 ACI 318-05 스트럿-타이 모델 설계규정에 적용하여 파괴실험이 수행된 30개 철근콘크리트 코벨에 대한 극한강도 평가를 수행하였으며, 그 결과를 실험결과 및 ACI 318-05 설계기준에 의한 극한강도 평가결과와 비교하였다.

• 한국지반공학회논문집
• /
• 제35권9호
• /
• pp.29-36
• /
• 2019

직경 500mm 및 직경 600mm PHC말뚝 A종의 파괴 압축하중($P_n$)은 각각 7.7MN 및 10.6MN으로 계산할 수 있었다. 직경 500mm 및 직경 600mm 매입 PHC말뚝 A종에 대한 압축정재하시험 시 말뚝 두부에 재하된 최대 압축하중은 6.9MN 및 8.8MN으로 측정할 수 있었으며 따라서 이 측정하중은 각각 $P_n$의 90% 및 83% 수준이었다. 직경 500mm 및 직경 600mm PHC말뚝 A종의 장기허용압축하중($P_a$)은 각각 1.7MN 및 2.3MN이었다. 모든 사례 매입 PHC말뚝의 양방향재하시험 자료로부터 계산된 지반의 허용지지력은 국내 현행 설계에서 사용하고 있는 극한지지력 산정공식으로 계산한 지반의 허용지지력보다 높은 수준으로 계산되었다. 따라서 매입 PHC말뚝의 설계에서 사용하는 극한지지력 산정공식은 매입 PHC말뚝의 실제 지지력 거동을 모사할 수 있도록 개선하여야 할 것으로 판단되었다.

• 콘크리트학회지
• /
• 제6권3호
• /
• pp.162-172
• /
• 1994

본 연구에서는 2번에 분리타설된 교량 슬래브의 휨 및 전단거동 특성에 대한 실험연구를 수행하였다. 분리타설된 슬래브의 거동은 구콘크리트의 표면상태, 다우웰 철근량 및 접착층의 부착강도에 의해 큰 영향을 받게 되므로, 본 연구에서는 이와 같은 변수를 변화시켜 실험을 수행하였다. 본 연구결과 초기균열이 발생할때까지는 콘크리트의 표면상태 및 다우웰 철근량에 따라 구조거동에 큰 차이를 보이지 않으나, 극한하중상태에 도달하면 구콘크리트의 표면상태가 양호하고 아크릴수지 처리와 다우웰 철근이 많을수록 분리타설된 슬래브는 일체로 거동하는 것으로 나타났다. 따라서, 본 연구결과는 앞으로 교량에서 2층으로 분리타설하는 철근콘크리트 슬래브의 설계를 위한 유용한 자료와 토대를 제시하고 있다.