• Food Science and Preservation
• /
• v.12 no.6
• /
• pp.617-623
• /
• 2005

Response surface methodology (RSM) was applied to microwave-assisted process (MAP) extraction for effective components from Mosla dianthera M. Microwave power (2,450 MHz, 0-160 W) and extraction time (1-5 min) were used as independent variables ($X_i$) for central composite design to yield 10 different extraction conditions. Optimum conditions were predicted for dependent variables of $75\%$ ethanol extracts, such as total yield($Y_1$), total phenolics($Y_2$), total flavonoids($Y_3$), and electron donation ability($Y_4$, EDA). Determination coefficients ($R^2$) of regression equations for dependent variables ranged from 0.8397 to 0.9801, and microwave power was observed to be more influential than extraction time in MAP. The maximal values of each dependent variable predicted at different extraction conditions of microwave power (W) and extraction time (min) were as follows; $6.76\%$ of total yield at 142.00 W and 4.36 min, 78.68 mg/g of total phenolics at 136.78 W and 4.40 min, 6.75 mg/g of total flavonoids at 159,69 W and 3.17 min, and $49.81\%$ of EDA at 133.87 W and 4.47 min, respectively. The superimposed contour maps for maximizing dependent variables illustrated the MAP conditions of 79 to 113 W in power and of 2.73 to 3.84 min in extraction time.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.185-192
• /
• 2011

The purpose of this paper is to propose the design and implementation of a korean style internet-based test system on the basis of efficiency and stability for middle server. The current assessment system has some unstable elements with regard to transmission procedure, cost, system load and stability. This paper proposes a series of activities for the performance improvement of korean style internet-based test system which finally produced various excellent results in the administration of expense control, human resources, and special operational affairs. The proposed system's technological factors using middle server have been tested through a basic simulation pilot system. Actual development procedure starts from the analysis required by improving the shortcomings of existing internet-based test systems. A efficiency comparison with existing system and newly developed system was made in the area of number of operators, abnormal processing, system maintenances. Korean style internet-based test system using middle server has shown great efficiency increased to the maximum of 2 times about the effectiveness of processing for various parts. The korean style internet-based test system using middle server have been given good evaluations with regard to the convenience of their use and the management system for operators and supervisors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.7-12
• /
• 2018

In the society where the paradigm of knowledge is rapidly changing and developing, convergence emphasizing the connection between knowledge and technology in various fields is significant. In order to cultivate these creative-convergent talents, STEAM(Science, Technology, Engineering, Arts, and Mathematics) is being considered important to make them equipped with creative thinking ability and core competence required in the future society and help them devise new ideas escaping from the branches of study. This study is about convergence instructional design of computer with marketing subject, which aims to foster talent. The results of this study are as follows. First, the structured process of convergence lessons. Second, the convergence lesson was based on a cyclic process with steps : selection of the subject concerned, selection of a topic, designing the lesson, mapping out the lesson plan and developing problems, having a final discussion on the whole lesson, performing the lesson and evaluating the lesson. Third, the development of the problems about the introduction of computer engineering and Internet marketing subject for convergence lessons. To make an effect of this model, studies applying this instructional design to many lectures should be implemented.

• Journal of Korean Society of Transportation
• /
• v.35 no.5
• /
• pp.396-408
• /
• 2017

In Korea, the number of elderly has been increasing rapidly. So it is also expected that the economic activity and the trip frequency of the elderly will increase. On the other hand, elderly related accidents such as falls during walking are steadily increasing and the satisfaction about pedestrian environment of elderly is very low. In this paper, we found one of the reasons for these dissatisfaction in pedestrian facility, which is not considering the walking ability (about 75% of non-elderly person) of the elderly. So, we analyze the kinematic walking characteristics of the elderly with the motion analysis system, when the elderly use stairs. As a result of analysis of various walking variables, the current standard for stairway height in Korean law (18cm) requires excessive force to elderly so it was difficult for elderly to keep the balance of the body in ascending and descending walk of stairs. In this paper, we propose the stair design criteria through the cluster analysis of walking parameters reflecting the gait characteristics of the elderly. This change is not a big for non-elderly person, but it can promote more socioeconomic activities for the elderly.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.736-741
• /
• 2017

This paper examines the design for improving the wiper system of rotorcraft. During rotorcraft operation, the wiping performance and excessive clearance can decrease. The wiper system consists of a wiper arm assembly, motor, convertor and flex drive. If there is a problem with the wiper system, the operation ability decreases because the operation is restricted in a rainy environment. There are two main causes of the problem of the wiper system: the lifting forces acting on the wiper arm in aircraft flight and the excessive gap of the components. To remedy these two problems, the wiper arm was improved. The improvements included increased contact pressure on the wiper arm (spring tension), improved gear clearance, and material and shape changes. Durability test, aircraft ground test and flight test were carried out to verify the improved shape, and it was confirmed that the wiping performance and clearance problems were solved. Currently, the rotorcraft is operated without problem by applying the improved shape, and this design improvement process will be a useful reference for future rotorcraft development.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.469-475
• /
• 2022

As the recent structure construction is constructed as a large-scale and deep underground excavation in close proximity to the building, the installation of retaining wall and supporters (Struts) has become complicated, and the number of supporters to avoid interference of the structural slab has increased. This construction process becomes a factor that causes an increase in construction joints of a structure, leakage and an increase in wall cracks. In addition, this reduced the durability and workability of the structure and led to an increase in the construction period. This study planned to dismantle the two struts simultaneously as a plan to reduce the construction joints, and corrected the earth pressure by assuming the reaction force value by the initial earth pressure and the measured data as the response ratio. After recalculating the corrected earth pressure through the iterative trial method, it was verified by numerical analysis that simultaneous disassembly of the two struts was possible. As a result of numerical analysis applying the final corrected earth pressure, the measured value for the design reaction force was found to be up to 197%. It was analyzed that this was due to the effect of grouting on the ground and some underestimation of the ground characteristics during design. Based on the result of calculating the corrected earth pressure in consideration of the response ratio performed in this study, it was proved analytically that the improvement of the brace dismantling process is possible. In addition, it was considered that the overall construction period could be shortened by reducing cracks due to leakage and improving workability by reducing construction joints. However, to apply the proposed method of this study, it is judged that sufficient estimations are necessary as there are differences in ground conditions, temporary facilities, and reinforcement methods for each site.

• International Journal of Advanced Culture Technology
• /
• v.10 no.1
• /
• pp.248-252
• /
• 2022

The environment refers to what is surrounded by something during human life. This environment is related to the way humans live, and presents various problems on how to perceive the surrounding environment and how the behaviors that constitute the environment support the elements necessary for human life. Humans have an interest in the supportability of the environment as the interrelationship increases as humans perceive and understand the environment and accept the factors supported by the environment. In space, human movement starts from one space to the next and exchanges stimuli and reactions with the environment until reaching a target point. These human movements start with subjective judgment and during gait movement, the spatial environment surrounding humans becomes a collection of information necessary for humans and gives stimulation. will do. In this process, in particular, humans move along the movement path through movement in space and go through displacement perception and psychological changes, and recognize a series of spatial continuity. An image of thinking is formed[1]. In this process, spatial experience is perceived through the process of filtering by the senses in the real space, and the result of cognition is added through the process of subjective change accompanied by memory and knowledge, resulting in human movement. As such, the spatial search behavior begins with a series of perceptual and cognitive behaviors that arise in the process of human beings trying to read meaning from objects in the environment. Here, cognition includes the psychological process of sorting out and judging what the information is in the process of reading the meaning of the external environment, conditions, and material composition, and perception is the process of accepting information as the first step. It can be said to be the cognitive ability to read the meaning of the environment given to humans. Therefore, if we can grasp the perception of space while moving and human behavior as a response to perception, it will be possible to predict how to grasp it from a human point of view in a space that does not exist. Modern people have the theme of reminiscing dog-friendly hotels for the healing of petloss syndrome, and this thesis attempts to approach the life of companions.

• Journal of The Korean Association For Science Education
• /
• v.34 no.2
• /
• pp.63-78
• /
• 2014

Integrative STEM education is an engineering design-based learning approach that purposefully integrates the content and process of STEM disciplines and can extend its concept to integration with other school subjects. This study was part of fundamental research to develop an integrative STEM education program based on the science inquiry process. The specific objectives of this study were to review relevant literature related to STEM education, analyze the key elements and value of STEM education, develop an integrative STEM education model based on the science inquiry process, and suggest an exemplary program. This study conducted a systematic literature review to confirm key elements for integrative STEM education and finally constructed the integrative STEM education model through analyzing key inquiry processes extracted from prior studies. This model turned out to be valid because the average CVR value obtained from expert group was 0.78. The integrative STEM education model based on the science inquiry process consisted of two perspectives of the content and inquiry process. The content can contain science, technology, engineering, and liberal arts/artistic topics that students can learn in a real world context/problem. Also, the inquiry process is a problem-solving process that contains design and construction and is based on the science inquiry. It could integrate the technological/engineering problem solving process and/or mathematical problem solving process. Students can improve their interest in STEM subjects by analyzing real world problems, designing possible solutions, and implementing the best design as well as acquire knowledge, inquiry methods, and skills systematically. In addition, the developed programs could be utilized in schools to enhance students' understanding of STEM disciplines and interest in mathematics and science. The programs could be used as a basis for fostering convergence literacy and cultivating integrated and design-based problem-solving ability.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.77-85
• /
• 2013

Objective: The aim of this study sets factors from previous research known to impact transfer effects as the independent variables, and examines their relationship with the dependent variables, near transfer effects and far transfer effects. Background: Transfer of Training refers to the application of what learners acquire knowledge and skills in training programs to their job. The ultimate goal of training is to apply what employees learn in training sessions to their workplace. In this sense, transfer of training has been a vital concern for training effectiveness. For training to be effective, trainees(learners) should be able to use what they learn in training program back on the job. Method: For this research purpose, this study conducted a survey on 170 nuclear operators in nuclear education and training center. Of these, survey result from the 167 recruits were sampled. Theoretical model of this study is based on Holton & Baldwin's(2003) distance model of transfer effects. This study sets transfer effects(near transfer, far transfer) as the main dependent variables. Meanwhile, the independent variables are trainee characteristics, training characteristics, organizational transfer climate. Each independent variable has subordinate variables. Subordinate variables of trainee characteristics are self-efficacy, motivation to learn, motivation to transfer and ability to transfer. Subordinate variables of training characteristics are training contents, ability of trainers, training design, training climate. The last Subordinate variables of organizational transfer climate are support of supervisors, support of peer, support of organization. Conclusion: As a analysis result, trainee characteristics appeared to be in effect only significant influence near far transfer of training, the effect of the far transfer of training, there is no significant. In addition, the training characteristics appeared to be having a significant influence on near and far transfer effects. Organizational transfer climate appeared to be having a significant influence on near and far transfer effects. Finally, near transfer effect appeared to be having a significant influence on far transfer effects. Application: Results of this analysis in the study to training organization and training characteristics of the transition environment effects on nuclear power institutions and operators training organization having a significant impact that says. The transfer of knowledge and technology, as well as that can be applied to a new situation in terms of education and training are important characteristics.

• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.755-763
• /
• 2011

This study was conducted to monitor the quality characteristics Citrus unshiu ethanolic extracts by a response surface methodology. In extraction conditions based on the central composite design with variations in ethanol concentration (0~100%), extraction temperature($35\sim95^{\circ}C$), and ratio of solvent to sample(20 mL/g). The maximum value of yield was 36.31% at $93.18^{\circ}C$, 67.13% of ethanol concentration. The extraction yield and total polyphenol content were improved with the increase of ethanol concentration than extraction temperature. Total flavonoid content was improved with the increase of extraction temperature than ethanol concentration. The coefficients of determinations($R^2$) were 0.8646(p<0.1) and 0.9153(p<0.05) in electron donating ability and hesperidin content, respectively. Estimated conditions for the maximized extraction including yield, total polyphenol content, total flavonoid content, electron donating ability, and hesperidin content were 55~73% in ethanol concentration, $89\sim95^{\circ}C$ in extraction temperature, and 20 mL/g in ratio of solvent to sample.