• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.269-274
• /
• 2011

The purpose of hull stress monitoring system(HSMS) is to lead hull structure to be safer at lower cost. We proposed a hull stress monitoring system for leisure boats using fiber-optic bragg grating(FBG) strain sensor. Fiber optic sensors are well suited for structure monitoring system, due to their ability to withstand harsh environments, immunity to electromagnetic interference, and reduce cabling installation cost when employing wavelength multiplexing. This paper presents an overview of current research and design of hull stress monitoring system for leisure boats.

• Nuclear Engineering and Technology
• /
• v.14 no.3
• /
• pp.122-137
• /
• 1982

Analyzed is the sensitivity of reactor transient behavior to various reactor parameters during the reactivity induced accidents (RIA) of the Kori Unit 1. Included in the analysis is a partial spectrum of RIAs with relatively fast transients such as uncontrolled rod cluster control assembly bank withdrawl from a subcritical or low power startup condition and rod ejection accidents. The analysis can be performed generally in three steps: calculation of an average core power change, hot spot heat transfer calculation and DNBR (departure from nucleate boiling ratio) calculation. The computer codes used for the analysis are either developed based on the codes relevent to it. These codes are evaluated to be highly reliable. An extensive sensitivity analysis is performed to study the effects of various reactor design and operating parameters on the reactor transient behavior during the accidents. The assumptions and initial conditions used for the RIA analysis in the Kori Unit 1 FSAR (Final Safety Analysis Report) are reexamined, and the corresponding analysis results are reassessed, based on the sensitivity analysis results, to be conservative and reliable.

• Korean Journal of Clinical Pharmacy
• /
• v.8 no.1
• /
• pp.19-22
• /
• 1998

Cefixime is an orally absorbed 3rd generation cephalosporin with a broad spectrum of activity against Gram-positive and Gram-negative bacteria and is highly resistant to $\beta-lactamase$ degradation. This study was carried out to evaluate the bioavailability of a new test drug of cefixime (100 mg/capsule) relative to the reference drug. The bioavailability was conducted on 20 healthy volunteers who received a single dose (400 mg) of the test and the reference drugs in the fasting state, in a randomized balanced 2-way crossover design. After dosing, serial blood samples were collected for a period of 12 hours. Plasma was analyzed for cefixime by a sensitive and validated HPLC assay. The major pharmacokinetic parameters $(AUC_{0-12hr},\;C_{max},\;T_{max})$ were calculated from the plasma concentration-time data of each volunteer. The $AUC_{0-12hr},\;C_{max}\;and\;T_{max}$ of the test drug were $36.91\pm11.85\;{\mu}g{\cdot}hr/ml,\;5.47\pm1.61\;{\mu}g/ml,\;and\;4.00\pm0.65\;hr,$ respectively, and those of the reference drug were $34.08\pm8.81\;{\mu}g{\cdot}hr/ml,\;5.25\pm1.40\;{\mu}g/ml,\;and\;4.20\pm0.62\;hr$, respectively. Mean differences of those parameters were 8.32, 4.29, and $4.76\%$, respectively, and the least significant differences at $\alpha$=0.05 for $AUC_{0-12hr},\;C_{max},\;T_{max}$ were 16.02, 13.78, and $11.76\%$, respectively. In conclusion, the test drug was bioequivalent with the reference drug.

• Journal of Navigation and Port Research
• /
• v.26 no.2
• /
• pp.235-243
• /
• 2002

Theoretical analysis have been performed to design the high power semiconductor laser for an optical sensor at 1.55${\mu}{\textrm}{m}$ wavelength range which is the lowest loss wavelength in optical fiber. The materials of active region and SCH were $Ln_{1-x}Ga_xAs_yP_{1-y}$. In order to use the light source of optical sensors, it has to satisfy wide spectral width and short coherence length. Therefore, in order to suppress lasing oscillation, we proposed laterally tilted PBH type with a window region. Also, tapered stripe structure was applied for high coupling efficiency into a single mode fiber. From these analyses, the devices of laterally tilted angled and bending structure were fabricated and their characteristics were measured. In the results of the measurement, the fabricated devices have sufficient output power and wide FWHM to apply to the light source of optical fiber sensors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1038-1044
• /
• 2011

In this paper, the multichannel intermediate frequency transceiver for broadband multimedia system is designed and the experimental results are analyzed. Basic elements of the transceiver such as frequency synthesizer, amplifier, mixer, automatic gain control amplifier are introduced. The analysis technique described here applies not only to amplifier but also to any other nonlinear components such as mixers and frequency doubler. Through the investigation of the power spectrum density of the transmitted signal, the phase noise of the local oscillator is evaluated below 70 dBc/kHz. The frequency characteristics of the modulated signal is flat within the system bandwidth. Also the effects of adjacent channel interference and supurious emission are analyzed. And the function of automatic gain control amplifier is well operated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1103-1108
• /
• 2010

In this paper, Frequency Synthesizer which is widely used for FH-SS system is proposed and the experimental results are analyzed. The performance of the DPLL(Digital Phase-Locked-Loop), which is the main part of the Synthesizer is analyzed by the computer program. Using Maxplus-II tool provided by altera. co., ltd, each part of the DPLL is designed and all of them is integrated into EPM7064SLC44-10 chip. And the simulation results are compared with the characteristics of the implemented circuits for analysis. And the experiential results show that the N value of the loop filter is toggled to adjacent N value, which result in phase jitter of the output. It can be resolved by increasing DCO(Digital Controlled oscillator) clock rate.

• The Journal of Engineering Geology
• /
• v.1 no.1
• /
• pp.121-136
• /
• 1991

The focal mechanism of the Hongsung Earthquake (1978. Oct. 7, M$_L$=5.0, Latitude 36.62N, Longitude 1 26.67E) was evaulated using the polarity distribution of the P-Waveforms. Through the non-linear computer process, the compatibility of polarity distributions of the 9 P-Waveforms observed at teleseismic distances from the Hongsung Earthquake epicenter was investigated to those of the focal mechanism determined from the varying strike, dip and rake angles. The resultant values for the strike and dip angle of the principal fault plane, which apparently matches very well the sunface lineament of the Hongsung region, are determined to be about 247 degree and 78 degree with uncertainties, respectively. However, the rake angle of the focal mechanism has wide range of 40 degree to 160 degree, which is mainly due to the poor coverage of the azimuthal angle of the observed seismic stations. Due to the consistency of principal stress axes, the resultant focal mechanism could support the current stress regime of that region, which may be caused by subduction of the Pacific Plate under the Eurasia Plate along the Japan Trench. It also provides information of seismic source characteristics of the part of the Korean Peninsula for aseismic design criteria such as Site Specific Response Spectrum and Strong Ground Motion Time History for the nuclear power plants and related nuclear waste disposal facility sites.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.2
• /
• pp.286-297
• /
• 2005

Recently, due to the gloalization of the industry environment and the consequent multi-national companies led by industrialized countries, fashion companies of newly industrialized countries are pursuing to globalize their businesses. This study conducted to review the global configuration of activities of the added value chain, the strategies to enhance global competitiveness, and global performance of value activities of Korean fashion companies. The data were collected from the survey by questionnaire on Korean fashion companies. The methods of analysis used in this study were regression, and descriptive statistics of the data. the results werw as follows. First, Korean fashion companies were undergoing diverse value activities through their foreign subsidiaries and overseas out-sourced companies in a wide spectrum of business activities ranging from design/planning o products to marketing/logistics. Second, the global competitive strategies that the Korean fashion companies were most focused on were the cost/productivity aspects. The efforts to differentiate the products from competitors, the efforts for innovation, an the efforts of growth were the next strategies. The strategy that was least emphasized was on seeking alliance with other business partners. Third, the result of the globalization efforts showed an overseas market growth of and average of 9%, and an average overseas market profit of 7.8%. The overall satisfaction on the result of the overseas market activities, and the rate of accomplishment of market targets were generally low.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.693-699
• /
• 2013

In this paper, ${\pi}/4$-DQPSK modem according to ITU-R M.1842-1 recommendation Annex1 is investigated and simulated. At first, standardization and technical trend of VHF maritime mobile communication are introduced. The ${\pi}/4$-DQPSK modem defined in the Annex1 should support 28.8Kbps bit transmission rate within 25KHz frequency bandwidth. We describe the system model and simulation process of ${\pi}/4$-DQPSK modem transmitter and receiver design with RRC(Root Raised Cosine) transmitter and receiver filter. Then we suggest various graphical simulation results(time domain signals, constellation, power spectral density according to roll-off factor, eye diagram), and show simulated BER performance of the modem. From the simulation results, it is shown that roll-off factor of RRC filter affects to BER performance according to SNR and the designed simulation model meets the spectrum mask requirement suggested in ITU-R M.1842-1 recommendation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.5
• /
• pp.629-634
• /
• 2009

In real-time system application, the feature extraction and scoring algorithm for classification of the passive sonar target has the following problems: it requires an accurate and efficient feature extraction method because it is very difficult to distinguish the features of the propeller shaft rate (PSR) and the blade rate (BR) from the frequency spectrum in real-time, it requires a robust and effective feature scoring method because the classification database (DB) composed of extracted features is noised and incomplete, and further, it requires an easy design procedure in terms of structures and parameters. To solve these problems, an intelligent feature extraction and scoring algorithm using the evolution strategy (ES) and the fuzzy theory is proposed here. To verify the performance of the proposed algorithm, a passive sonar target classification is performed in real-time. Simulation results show that the proposed algorithm effectively solves sonar classification problems in real-time.