• Journal of the Korean Geotechnical Society
• /
• v.35 no.4
• /
• pp.27-35
• /
• 2019

This study confirmed the applicability to the field of geotechnical engineering for relatively complicated space and many target design variables in back analysis. The Sharan's equation and the Blum's method were used for the tunnel field and the retaining wall as a model for the multi-variate problem of geotechnical engineering. Optimization methods are generally divided into a deterministic method and a stochastic method. In this study, Simulated Annealing Method (SA) was selected as a deterministic method and Differential Evolution Algorithm (DEA) and Particle Swarm Optimization Method (PSO) were selected as stochastic methods. The three selected optimization methods were compared by applying a multi-variate model. The problem of deterministic method has been confirmed in the multi-variate back analysis of geotechnical engineering, and the superiority of DEA can be confirmed. DEA showed an average error rate of 3.12% for Sharan's solution and 2.23% for Blum's problem. The iteration number of DEA was confirmed to be smaller than the other two optimization methods. SA was confirmed to be 117.39~167.13 times higher than DEA and PSO was confirmed to be 2.43~6.91 times higher than DEA. Applying a DEA to the multi-variate back analysis of geotechnical problems can be expected to improve computational speed and accuracy.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.945-952
• /
• 2018

Recently, bass fishing has become a marine leisure sport in Korea. There are 4 major fishing associations in Korea, and each association holds 10-15 tournaments each year. However, supply of 17 ft bass boats, which are preferred in leagues, depends 100 % on imports. In this study, we have derived the main specifications to develop the initial hull forms of a 18.5ft bass boat through statistical analysis based on mothership data. In addition, CFD numerical analysis was carried out according to deadrise angle and longitudinal center of gravity, which strongly influenced the resistance and planing performance. For numerical analysis, design speed was set to $Fn=3.284 (Re=9.858{\times}10^7)$, the deadrise angle was set from 12 to $20^{\circ}$, and the longitudinal center of gravity was set in the range of 0 to $8%L_{wL}$ from the center of buoyancy to the stern. Based on the numerical results, we first set the range of these factors by resistance performance and immersion keel length. Furthermore, using a correlation graph of Savitsky's Drag-Lift ratio, we derived the deadrise angle ($14-16^{\circ}$) and longitudinal center of gravity ($4-6%L_{wL}$).

• Journal of Korean Dental Science
• /
• v.12 no.1
• /
• pp.13-19
• /
• 2019

Purpose: The aim of this study was to compare the flexural strength of provisional fixed dental prostheses which was three-dimensional (3D) printed by several build directions. Materials and Methods: A metal jig with two abutment teeth and pontic space in the middle was fabricated. This jig was scanned with a desktop scanner and provisional restoration was designed on dental computer-aided design program. On the preprocessing software, the build angles of the restorations were arranged at $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$ and support was added and resultant structure was sliced to a thickness of $100{\mu}m$. Processed restorations were printed with digital light processing type 3D printer using poly methyl meta acrylate-based resin. After washing and post-curing, compressive loading was applied at a speed of 1 mm/min on a metal jig fixed to a universal testing machine. The maximum pressure at which fracture occurred was measured. For the statistical analysis, build direction was set as the independent variable and fracture strength as the dependent variable. One-way analysis of variance and Tukey's post hoc analysis was conducted to compare fracture strength among groups (${\alpha}=0.05$). Result: The mean flexural strength of provisional restoration 3D printed with the build direction of $0^{\circ}$ was $1,053{\pm}168N$; it was $1,183{\pm}188N$ at $30^{\circ}$, $1,178{\pm}81N$ at $45^{\circ}$, $1,166{\pm}133N$ at $60^{\circ}$, and $949{\pm}170N$ at $90^{\circ}$. The group with a build direction of $90^{\circ}$ showed significantly lower flexural strength than other groups (P<0.05). The flexural strength was significantly higher when the build direction was $30^{\circ}$ than when it was $90^{\circ}$ (P<0.01). Conclusion: Among the build directions $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$ set for 3D printing of fixed dental prosthesis, an orientation of $30^{\circ}$ is recommended as an effective build direction for 3D printing.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.92-101
• /
• 2018

It is important to inherit and develop the unique cultural characteristics of each country and region in the trend of globalization. The traditional lighting fixtures in China are the main artifacts that can be used to extract the cultural aesthetics and practicality of the people, and are a major relic of the people's cultural sensitivities and practicalities. The purpose of this study is to understand the background of the time and the meaning of national culture through the lighting equipment of the most revived Tang Dynasty in Chinese history. The purpose of this paper is to examine the development trend of lighting equipment in the Tang Dynasty through the recognition of the social background, religious thought, cultural characteristics, and characteristics of lighting fixtures in the Tang Dynasty. In this paper, we analyzed seven factors (function, molding, fuel, usage space, usage method, religious thought, and living environment) of the Tang dynasty lighting fixtures through multiple factor analysis method. In addition, the Tang Dynasty period lighting fixtures had four trends: "popularization of lighting, universal simplification of molding, diversification of use, and spread of Buddhist influence." This tendency has a meaning to provide a new motive for modern lighting design in the context of cultural uniqueness and perspectives.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.252-258
• /
• 2018

A larger energy consumption and concentration of population induced green house gas glowing and heat island effect in the urban space. Roof green system was a effect method to reduce green house gas and heat concentration in the city. Therefore, construction of this system was increasing. Most of lightweight soil used in roof green system was perlite, but this caused dust and skin disease. So it needed to develop another new lightweight soli for roof green system. Meanwhile, a thermoelectric power plant generated bottom ash as a by-product. According to previous research, bottom ash could be used for artificial lightweight soil with 60 wt% of mixing rate. But this study was proceed to develop a artificial lightweight soil using bottom ash with higher mixing rate by 65 wt% and different organic ingredients. First, physical and chemical properties of bottom ash was investigated. Then test according to landscaping design standard was proceeded for various artificial lightweight soil mix types using bottom ash, bark, compost and coco peat. As a result, the artificial lightweight soil with 65% of bottom ash, 30% of bark and 5% of compost was suitable for low and middle range of soil standard.

• 재활복지
• /
• v.20 no.1
• /
• pp.211-233
• /
• 2016

The purpose of this study is to figure out problems and to suggest improvement scheme by examining 31 of the disabled who used power wheelchair developed for safe moving and standing support. The results are as follows. First, standing power wheelchair that enables the disabled to sit and stand up was developed. It can also be used as means of transportation for moving in narrow space and in a short distance. In the usability test of this prototype, two groups were respectively examined in 60 evaluation items. One group consisted of 16 people with disabilities using manual wheelchairs. And the other one consisted of 15 people with disabilities using automatic wheelchairs. The entire average figure of two groups was shown to be 2.72 and standard deviation was 0.820. Specifically, the average figure of the group in manual wheelchair was 2.85 and the one of the other group in automatic wheelchair was 2.57. And both group replied that the move to stand up and sit on both types of wheelchair was the most inconvenient thing. It shows why ergonomic design for persons with under extremity disabilities to stand up and sit is needed. Second, with further study based on the results of usability test of the disabled, it will make contribution to increase the quality of people with disabilities by helping them move and do daily lives on their own.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.692-705
• /
• 2018

Ground vibration is one of the remarkable issues in tunnel blasting. In recent studies, to improve the fragmentation with reduction of ground vibration in tunnel blasting, a vibration-controlled blasting method with artificial cutting slot near the center-cut holes has been suggested. This study examines the effect of the different arrangement of artificial cut-slot on the vibration reduction and fragmentation by performing the full-scaled concrete block blast experiments and the numerical simulations with 3D-DFPA. The results show that the existence of artificial slot contributes to the improvement of vibration reduction, blast fragmentation and the efficiency of the cutting slot blast. It can be explained that the artificial slot play a free surface role and should decrease the burden between the cut holes. Crater volumes of the blasted concrete blocks were measured by 3-dimensional digital image analysis and compared with the ideal standard crater volume which can be calculated by theoretical standard blast design method. As a result, the ratio of burden and hole diameter which should achieve the standard crater in the cut-hole blasting were suggested.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.27-35
• /
• 2019

The existing middle-long span railway bridge has been mainly applied to steel box girder bridges. However, the steel box girder bridges have disadvantages in securing the space under the bridge, and the main girder is made of a thin plate box shape, resulting in a ringing noise due to the vibration. Many complaints about noise have been raised. For this reason, there is a need for the development of long railway bridges that can replace steel box girder bridges. In this paper, the characteristics of the steel composite railway bridge currently developed were introduced and a time history analysis was conducted using MIDAS Civil reflecting the speed of KTX load for 40m and 50m bridges. In addition, from the analysis results, the dynamic behavior of target bridges were verified and it was examined whether they meet the dynamic performance criteria proposed in the railway design standards. As a result, all of the bridges under review satisfied the dynamic safety criteria, however, in case of 40m of span, the vertical acceleration value was very large. In order to solve this problem, authors proposed the improvement plan and corrected the cross section to confirm that the vertical acceleration decreased.

• The Korean Journal of Archival Studies
• /
• no.29
• /
• pp.35-78
• /
• 2011

This study is intended to recommend for acquisition methods of the theatre collection. Theatre activities is representative of the performing arts, and the Korea theatre history start from the modern history of Korea. In the meantime, theatre collections has already been lost by a lack of effort and management, and scattered most of the collections. In particular, a one-off nature and volatility of theatrical performances make future generations to enjoy the performances and to study should consult the relevant records. Therefore, collecting records can be very serious mission. In this study, theatre collections of the country which aims to collect and analyze the characteristics and type of theatre collections. Based on this information, collection scope, targets, priorities, acquisition level, method of collecting are proposed the following. First, collection scope is defined for the theatre related collections which was performed nationwide in the 1900s, the times that modern theatre was begun. The object includes related information of planning, administration, drama (script), directing, stage design, public relations, production, evaluation, personal records, biographical data, group data and space data. Second, the theatre collections are divided into records and historical records. Priority of collections object is determined by the historical value and the theatre performed by the support of public organization. Third, the acquisition level is divided into archived, mirrored, web linked and database, which is proposed by the determined levels of mandatory, recommend and discretion according to the characteristic of performance. Fourth, acquisition methods are suggested by the general acquisition methods of transfer, donation and purchase as well as the methods of copy, production, legal deposit, entry and web link etc. The acquisition of theatre collections is executed on digital-based environment, and a centralized authority control should be establishmented. And through the development of network with theatre's stakeholders and the cooperation of related organizations, theatre collections acquisition is feasible.

• Journal of the Korean Society for information Management
• /
• v.36 no.1
• /
• pp.31-52
• /
• 2019

The purpose of this study is to apply the Servicescape, which is used to measure the spatial services in marketing, to the studies on university libraries, in order to identify the influence of the library spaces and facilities on the satisfaction and continuance intention of the users of university libraries. For this purpose, questionnaires and in-depth interviews were conducted for users in ten private universities located in Seoul. Servicescape factors of the libraries showed that cleanliness, comfort, aesthetics, and convenience had a significant influence. Of these, convenience turned out to have the highest level of influence upon satisfaction, followed by cleanliness, aesthetics, and comfort. Descriptive statistical analysis showed whether there were significant differences in satisfaction and continuance intention based on the differences in the characteristics of the samples. Findings show that it would be necessary to provide spaces that can accommodate the various functions of a university library; seek advancement of the services; and develop the spaces of a library in consideration of cleanliness, comfort, aesthetic, and convenience. This study introduced the concept of Servicescape for the first time in the field of library and information science. This study implies that the results assist a more detailed analysis for the Library as Place dimension of LibQUAL+, and provide a new guideline for practitioners who design library spaces.