• International Journal of CAD/CAM
• /
• v.2 no.1
• /
• pp.1-12
• /
• 2002

Computer-Aided Reliable and Optimal Design (CAROD) system is an efficient tool defining the best compromise between cost and safety. Using the concurrent engineering concept, it can supply the designer with all numerical information in the design process. This system integrates several fields such as multidisciplinary optimization, reliability analysis, finite element analysis, geometrical modeling, sensitivity analysis and concurrent engineering. When integrating these disciplines, many difficulties are found such as model coupling and computational time. In this paper, we propose a new concurrent methodology satisfying the reliability requirement, allowing the coupling of different models and reducing the computational time. Two applications (rotating disk and hook structures) demonstrate that CAROD system can be a practical concurrent engineering application for designers.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.6
• /
• pp.85-94
• /
• 2001

Hydraulic systems of rope brake for elevators are modelled to evaluate design parameters such as cylinder pressure, pis-ton displacement, accumulator capacity, and so on. To assure the results, experiments were performed. The analysis results agree well with the experimental results. The scheme in this study is expected to be utilized in the design of rope brake system for elevators to get design parameters and to improve the safety.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.5
• /
• pp.829-835
• /
• 2009

Parameter design is an approach to reducing performance variation of quality characteristic value in products and processes. Taguchi has used the signal-to-noise ratio to achieve the appropriate set of operating conditions where variability around target is low in the Taguchi parameter design. However, there are difficulties in practical application, such as complexity and nonlinear relationships among quality characteristics and control factors (design factors), and interactions occurred among control factors. Neural networks have a learning capability and model free characteristics. There characteristics support neural networks as a competitive tool in processing multivariable input-output implementation. In this paper we propose a substantially simpler optimization procedure for parameter design using neural network. An example is illustrated to compare the difference between the Taguchi method and neural network method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.9 s.252
• /
• pp.1070-1077
• /
• 2006

In the present study, sizing and shape optimizations are performed based on the reduced system of large-scaled problem. In the analysis part to achieve efficiency and reliability of computation, two-level condensation scheme is applied. In the construction of reduced system of large scaled problems, it is much more efficient to use sub-domain method. Thus, in the present paper, two-level reduction method combined with sub-domain method is employed. Once the reduced system is constructed, it is straightforward to obtain design sensitivities from the analysis results of the reduced system We use semi-analytic method to obtain design sensitivities. Performance of the efficiency and reliability of the present reduction method in the structural optimization problem is demonstrated through the numerical examples. The present framework of reduction method should serve as a fast and reliable design tool in analysis and design of large-scaled dynamic problems.

• Steel and Composite Structures
• /
• v.19 no.2
• /
• pp.263-275
• /
• 2015

This study presents conceptual information of newly optimized shapes and connectivity of the so-called outrigger truss system for modern tall buildings that resists lateral loads induced by wind and earthquake forces. In practice, the outrigger truss consists of triangular or Vierendeel types to stiffen tall buildings, and the decision of outrigger design has been qualitatively achieved by only engineers' experience and intuition, including information of structural behaviors, although outrigger shapes and the member's connectivity absolutely affect building stiffness, the input of material, construction ability and so on. Therefore the design of outrigger trusses needs to be measured and determined according to scientific proofs like reliable optimal design tools. In this study, at first the shape and connectivity of an outrigger truss system are visually evaluated by using a conceptual design tool of the classical topology optimization method, and then are quantitatively investigated with respect to a structural safety as stiffness, an economical aspect as material quantity, and construction characteristics as the number of member connection. Numerical applications are studied to verify the effectiveness of the proposed design process to generate a new shape and connectivity of the outrigger for both static and dynamic responses.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.10
• /
• pp.402-407
• /
• 2016

Ground-coupled heat pump systems have been widely used, as they are regarded as a renewable energy source and ensure a high annual efficiency. Among the system components, borehole heat exchangers (BHE) play an important role in decreasing the entering water temperature (EWT) to heat pumps in the cooling season, and consequently improve the COP. The optimal sizing of the BHEs is crucial for a successful project. Other than the existing sizing methods, a simulation-based design tool is more applicable for modern complex geothermal systems, and it may also be useful since design and engineering works operate on the same platform. A simulation-based sizing method is proposed in this study using the well-known Duct STorage (DST) model in Trnsys. TRNOPT, the Trnsys optimization tool, is used to search for an optimal value of the length of BHEs under given ground loads and ground properties. The result shows that a maximum EWT of BHEs during a design period (10 years) successfully approaches the design EWT while providing an optimal BHE length. Compared to the existing design tool, very similar lengths are calculated by both methods with a small error of 1.07%.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.9
• /
• pp.72-80
• /
• 2019

In this task, the tool dynamometer design and manufacture, and the Ansys S/W structural analysis program for tool attachment that satisfies the cutting force measurement requirements of the tool dynamometer system are used to determine the cutting force generated by metal cutting using 3-axis static structural analysis and the LabVIEW system. The cutting power in a cutting process using a milling tool for processing metals provides useful information for understanding the processing, optimization, tool status monitoring, and tool design. Thus, various methods of measuring cutting power have been proposed. The device consists of a strain-gauge-based sensor fitted to a new design force sensing element, which is then placed in a force reduction. The force-sensing element is designed as a symmetrical cross beam with four arms of a rectangular parallel line. Furthermore, data duplication is eliminated by the appropriate setting the strain gauge attachment position and the construction of a suitable Wheatstone full-bridge circuit. This device is intended for use with rotating spindles such as milling tools. Verification and machining tests were performed to determine the static and dynamic characteristics of the tool dynamometer. The verification tests were performed by analyzing the difference between strain data measured by weight and that derived by theoretical calculations. Processing test was performed by attaching a tool dynamometer to the MCT to analyze data generated by the measuring equipment during machining. To maintain high productivity and precision, the system monitors and suppresses process disturbances such as chatter vibration, imbalances, overload, collision, forced vibration due to tool failure, and excessive tool wear; additionally, a tool dynamometer with a high signal-to-noise ratio is provided.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3
• /
• pp.86-93
• /
• 1997

A Design & Simulation Tools of Surface Acoustic Wave(SAW) Filters for Mobile Communication Systems, which is based on Optimization of Impulse Samples with Object Function of Amplitude, Ripple and Group Delay Characteristics, is developed and is also evaluated by designning and simulating the SAW IF Filter for PCS. In Optimization Process, fast calculation algorithm of Object Function is proposed. With this Design Tools, Transversal SAW IF Filters can be easily designed under limited conditions of small chip size and package size. It may be also applicable to wide Band Pass Filters in future Communication Systems such as FPLMTS.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.3
• /
• pp.97-103
• /
• 2001

This paper has focused on the Optimization of the cutting parameters for urning operation based on the Taguchi method. Four cutting parameters. nemely, cutting speed, feed depth of cut and nose radius are optimized with consideration of the surface roughness. The design and analysis of experiments are conducted to study the performance characteristic. The effects of these parameters on the surface roughness have been investigated using signal-to-noise(S/N) ratio and analy-sis of variance(ANOVA). The experiments have been performed using coated tungsten carbide inserts without any cutting fluid. Experimental results illustrate the effectiveness of this approach.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1925-1932
• /
• 2003

Topology optimization is widely accepted as a conceptual design tool for the product design. Since the resulted layout of the topology optimization is a kind of digital images represented by the density distribution, the seamless process is required to transform digital images to the CAD model for the practical use. In this paper, the general process to construct a CAD model is developed to apply for topology images based on elements. The node density and the morphology technique are adopted to extract boundary contour of the shape and remove the noise of images through erosion and dilation operation. The proposed method automatically generates point data sets of the geometric model. The process is integrated with Pro/Engineer, so that the engineer in practice can directly handle with curves or surfaces form digital images.