• Steel and Composite Structures
• /
• 제6권1호
• /
• pp.1-14
• /
• 2006

Experiments have been carried out on six composite and two plain steel plate girders under shear loading to understand the elastic and inelastic behaviour of such girders. The failure mechanism assumed and used to develop design equations is normally based on the failure patterns observed in the experiments. Therefore, different types of cracks and failure patterns observed in the experiments are reviewed briefly first. Based on the observed failure patterns, a design method to predict the ultimate shear capacity of composite plate girders is proposed in this paper. The values of ultimate shear capacity obtained using the proposed design method are compared with the corresponding experimental values and it is found that the proposed method is able to predict the shear capacity accurately.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1662-1671
• /
• 2008

The ERS(Embedded Rail Track system) is constructed in the world due to a slab track system having maintenance free, high structural safety, and deduction of noise and vibration. The ADRI-ERS is developed as Korean type. This paper shows that the design of ADRI-ERS and experiments according to DIN EN 13481-5 and Korea high speed train test guidelines. The ADRI-ERS has high structural safety in pull-out test, longitudinal resistance test, and fatigue test. The design method of ADRI-ERS is proposed by two design constants due to the result of experiments also.

• 대한안전경영과학회지
• /
• 제7권5호
• /
• pp.69-84
• /
• 2005

This paper proposes statistically designed experiments which provide a proactive means to implement safety and environmental applications. Minimal experimental designs such as fractional factorial design, Plackett-Burman design, Box-Behnken design are economical and can be achieved tremendous savings with relatively few experiments. These experimental designs and analysis methods are illustrated with cases.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.866-872
• /
• 2024

Design Extension Conditions (DEC)-A assessments of the operating nuclear power plants are generally considered for the purpose of getting additional safety demonstrations of their capability to undergo conditions that are generally more severe than DBAs by features implemented in the design and accident management measures. The pursued methodology is generally based upon Best Estimate approaches aiming at verifying that the safety limits in terms of integrity of the barriers against eventual large or early releases of radioactive material are fulfilled. These aspects are nowadays being experimentally and analytically addressed within the OECD/NEA experimental projects like the ATLAS and PKL series where a set of DEC-A experiments are considered. In this paper, experiments related to SBLOCA at the vessel upper head of the pressurized vessel of ATLAS and PKL are analytically assessed using the CATHARE code. These experiments includes issues related to common cause failure of the safety injection system and operator actions for preventing core excessive overheating. It is shown that, on the one hand, the safety features embedded in the design together with the operator actions are capable to prevent the progression towards a severe accident state and on the other hand, the code prediction capabilities for such scenario are generally good but still to be enhanced.

• 한국기계가공학회지
• /
• 제8권2호
• /
• pp.60-68
• /
• 2009

The objective of this paper is to design stamping die of inner reinforcement panel with DL 950 advanced high strength steel as stamping materials through numerical analyses and experiments. The stamping process was designed as bending dominant process consisting of 1 step of notching and 4 steps of bending processes. In order to obtain a proper design of the stamping die, various three-dimensional elasto-plastic finite element analyses were performed using a commercial code AUTOFORM V4.2. Design parameter of stamping die was chosen as the corner radius of the stamping die for each step. From the results of the FE analysis, feasible corner radii of the stamping die, which can minimize the deviation of corner angle of the stamped part from design data, and forming load for each part were estimated. Stamping experiments were carried out using the manufactured stamping die according to the proposed die design. The results of experiments were shown that the stamping die can successfully manufacture the inner reinforcement panel with DL 950 advanced high strength steel as base stamping material.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.149-155
• /
• 2013

Since bio-diesel oil has a merit that it satisfies both demand of substitution for fossil fuel and reduction in carbon dioxide emission, it is widely used in diesel engines by blending in gas oil in small quantity. It is needed to reduce in NOx emission in some way or others if blending ratio of bio-diesel oil is going to increase, because it is demerit that bio-diesel oil emits more NOx emission than gas oil. In this study, it was accomplished to optimize 3 factors what effect on NOx emission as blending ratio of bio-diesel oil, injection timing and common rail pressure with an introduction of a design of experiments, in order to minimize a number of tests. It was cleared that to introduce the design of experiments was very available in NOx optimization.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.700-703
• /
• 2004

A reliability analysis and design procedure based on the design of experiment (DOE) is combined with the response surface method (RSM) for numerical efficiency. The procedure established is based on a 3$^n$ full factorial DOE for numerical quadrature using explicit formula of optimum levels and weights derived for general distributions. The full factorial moment method (FFMM) shows good performance in terms of accuracy and ability to treat non-normally distributed random variables. But, the FFMM becomes very inefficient because the number of function evaluation required increases exponentially as the number of random variables considered increases. To enhance the efficiency, the response surface moment method (RSMM) is proposed. In RSMM, experiments only with high probability are conducted and the rest of data are complemented by a quadratic response surface approximation without mixed terms. The response surface is updated by conducting experiments one by one until the value of failure probability is converged. It is calculated using the Pearson system and the four statistical moments obtained from the experimental data. A measure for checking the relative importance of an experimental point is proposed and named as influence index. During the update of response surface, mixed terms can be added into the formulation.

• 공업화학
• /
• 제33권4호
• /
• pp.402-407
• /
• 2022

실험계획법을 이용하여 MOF-5 합성공정의 최적화에 대한 연구를 수행하였다. 먼저 전구체의 농도를 최적화 하기 위하여 혼합물 설계법을 이용하였다. 합성에 사용되는 세 가지 전구체인 terephthalic acid, zinc acetate dihydrate, N,N-dimethylformamide의 농도비를 extreme vertices design methods로 최적화 하였다. MOF-5 합성을 위한 최적의 농도는 1 mol : 2.7 mol : 40 mol로 예측되었다. 이후, 온도, 시간 및 교반 속도와 같은 합성 반응 조건이 합성에 미치는 영향을 분석하기 위해 다단계 요인 설계법을 사용하였다. 수행된 통계 분석에 따라 교반 속도는 후속 연구에서 제외되었다. 합성시간과 온도를 고려한 합성 공정 최적화는 중앙 조성 설계법을 이용하였다. 13번의 합성 실험을 통해 도출된 2차 모델 방정식을 이용하여 결과를 추정하였다. 설계에 사용된 모델에 의하면 119 ℃ 및 10.4 h 조건에서 합성된 MOF-5가 최대의 결정화도를 가지는 것으로 예측되었다.

• 한국실내디자인학회논문집
• /
• 제13권3호
• /
• pp.3-10
• /
• 2004

Modern society is indefinable and constantly changes like nature changes. It uses design to create new experiments and trend within social environment and culture. In the history of interior architecture and postmodernism, the Italian design movement of Archizoom, Studio Alchimia and Memphis are very important, and Andrea Branzi was the central figure of this design movement. His experimental and defiant works throughout this design movement produced design with combination, indefiniteness, sustentation, and reiteration. Designers must recreate themselves continually and need to have constant experimental spirit and attempts. From this point of view, the study on Andrea Branzi who led Italian design revolution with various experiments and attempts is valuable, and it will help to find the direction of design in this modern social and cultural environment.

• 한국초등과학교육학회지:초등과학교육
• /
• 제37권1호
• /
• pp.12-26
• /
• 2018

The purpose of this study was to investigate the characteristics of reasoning in which $3^{rd}$ grade elementary school students form ideas, design experiments, and interpret the results to solve problems in small group argumentation. For this purpose, 12 3rd-grade students' small group argumentations including experiments were observed. The researchers analyzed students' pre- and post-open questionnaires, field notes, and video recordings of small group argumentation. The results of the research are as follows. First, in the initial opinion formation process, a hasty unification of opinions and a transformation of inquiry problem occurred. In the design and execution of experiments, verification experiments and unplanned and arbitrary experiments were performed. They also selectively noticed or accepted claims, evidence, interpretation, and criticism. They could distinguish between the condition and the cause, but they were confused by using inaccurate terms and tended to keep the initial opinions when interpreting the results and drawing conclusions.