• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.153-158
• /
• 2006

Nowadays, hollow upper-shaft of monobloc type has been considered for weight reduction and high quality in the automobile industry. To form the upper-shaft under tube cold extrusion, Taguchi method is applied to optimize the die design in this study. Taguchi method for optimum die design is to establish the optimal combination of design parameters and to reduce a number of experiments. Effect of parameters including the die relief, mandrel, die half angle is investigated and analyzed based on FEA analysis using a FEM commercial software MSC_Marc. Furthermore extrusion experiments have been performed to verify the results investigated in the FEM simulations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1224-1228
• /
• 2009

The korean tilting train can increase the whole operating speed at a curved railroad, reducing the lateral acceleration with the tilting mechanism unlike the train developed before. However, increasing operating speed on the curved section, may cause safety problem of train travel. In general, a suspension system has important effects on driving safety. Therefore, optimization of suspension system is necessary to secure the safety of the tilting train. In this study, the tilting train suspension system has been optimized using Design of Experiments (DOE). First, the design parameter is selected using sensitivity analysis. A lateral acceleration which affects on the driving safety is chosen as the objective function. And the Design of Experiments (DOE) is used for optimization. As a result, new design parameters which show better performance than the existing suspension system has been suggested.

• Journal of the Korean Data and Information Science Society
• /
• 제27권5호
• /
• pp.1263-1272
• /
• 2016

다구찌가 제안한 파라미터설계에서 사용되는 교차배열은 제어인자뿐만 아니라 잡음인자를 동시에 고려한 획기적인 방법으로 많은 장점이 있다. 반면 단점으로는 지나치게 많은 실험수를 필요로 하는 점이다. 실험수를 줄이기 위한 방안으로 통합배열 방법론이 제시되었다. 또 다른 단점으로 다구찌는 최적조건을 찾는데 있어서 신호대 잡음비를 사용하였는데 신호대 잡음비를 사용함에 따라 여러 가지 문제가 발생하였다. 본 논문에서는 파라미터설계에서의 단점을 개선하고자 신호대 잡음비에 의존하지 않으면서도 실험수를 줄이기 위한 대체방안을 제안하고자 한다. 아울러 파라미터설계에서 사용되는 교차배열과 실험수를 줄인 통합배열 두 가지 사례를 들어 비교 연구하고자 한다.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
• /
• pp.132-137
• /
• 2005

Installation art(I.A.), which has appeared since 1940s against the loss of human nature and hackneyed art caused by materialism, is in pursuit of contact with audience and various artistic experiments. Many features of I.A. - to try contact with audience, to do experiments connecting different genres of art, to regard time and nature as elements of art and to use high technology - could give good ideas for contemporary display(S.W.D.) design. This study is a basic work to suggest new S.W.D. design through artistic principles of I.A.. First, I.A. and S.W.D. design were studied theoretically. Next, spatial expressions were extracted from I.A. and the case study was proceeded to seek the co-relationship of spatial expressions and display design. For a case of Shiseido, it could be evaluated very high because it adapted spatial expressions of I.A. successively. The S.W.D design could be more effective presentation when it has close contact with audience and various experimetal and artistic ways of Installation art.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.619-624
• /
• 2000

Design of experiments based on Taguchi's orthogonal array is utilized for exploring the design space and for building response surface models of insulator and isolator database in order to facilitate the effective solution of multi-objective optimization commonly occurred in NVH problems. Response surface models, called engineering database of design space, provide an efficient means to rapidly model the trade-off among many conflicting NVH goals in automotive. In the design of insulator and isolator in automotive interior part, it is important not only to construct effective matrices of NVH but also to build up engineering database of current products. The experimental design especially based on orthogonal array and the nonlinear optimization algorithms are successfully used together to obtain the optimal design of insulator and isolator. The $2^{nd}$ order response surface models of absorption coefficient and insertion loss are constructed by using modified Taguchi's $L_{12}2^13^7$ orthogonal array and successfully used in optimal design of insulator and isolator.

• Communications for Statistical Applications and Methods
• /
• 제15권1호
• /
• pp.125-136
• /
• 2008

많은 실제적인 공학 설계문제에 있어서, 목적함수의 형태는 설계변수들에 의하여 정확하게 주어지지 않는다. 이러한 환경 하에서, 구조해석, 유체 역학 해석, 열역학 분석과 같은 등과 같은 문제에서 설계변수들의 값이 주어졌을 때 목적함수들의 값은 실제 실험이나 계산상의 실험을 통하여 얻어지게 된다. 일반적으로, 이러한 실험들은 많은 비용이 든다. 이런 경우에는 실험의 횟수를 가능한 적게 하기위하여, 목적함수의 형태를 예측하는 것과 병행하여 최적화를 수행하게 된다. 반응표면분석(Response Surface Methodology, RSM)은 이러한 접근 방법에서 잘 알려져 있다. 본 논문에서는 목적함수의 예측을 위하여 서포트 벡터 기계(Support Vector Machines, SVM)의 방법을 적용할 것이다. 이러한 접근에서 가장 중요한 과제들 중의 하나는 가능한 실험의 횟수를 적게 하기 위하여 적절하게 표본자료들을 배치하는 것이다. 이러한 목적에 서포트 벡터의 정보들이 효과적으로 사용되어짐을 보이고 제안한 방법의 효율성은 공학 설계문제에서 잘 알려진 수치 예제를 통하여 보인다.

• Geomechanics and Engineering
• /
• 제2권2호
• /
• pp.71-88
• /
• 2010

Soil nailing technique is being widely used for stabilization of vertical cuts because of its economic, environment friendly and speedy construction. Global stability and lateral displacement are the two important stability criteria for the soil nail walls. The primary objective of the present study is to evaluate soil nail wall stability criteria under the influence of in-situ soil variability. Finite element based numerical experiments are performed in accordance with the methodology of $2^3$ factorial design of experiments. Based on the analysis of the observations from numerical experiments, two regression models are developed, and used for reliability analyses of global stability and lateral displacement of the soil nail wall. A 10 m high prototype soil nail wall is considered for better understanding and to highlight the practical implications of the present study. Based on the study, lateral displacements beyond 0.10% of vertical wall height and variability of in-situ soil parameters are found to be critical from the stability criteria considerations of the soil nail wall.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.853-858
• /
• 2001

Generally, mixed materials of LDPE, EVA and foaming agent are manufactured by crosslinking foaming or chemical foaming process. Above materials were used in a microcellular foaming injection molding process. Influence of each factor such as injection type, temperature of barrel, rate of mixed materials and contents of foaming agent was estimated by DOE(Design of Experiments). As a result of experiments, injection type and rate of LDPE, EVA have an influence on foaming rate. This data can be used in field of application of LDPE and EVA.

• 소성∙가공
• /
• 제21권4호
• /
• pp.265-270
• /
• 2012

In this study, a process design method for the multi-pass shape drawing is proposed with consideration of the drawing stress. First, the shape drawing load was calculated to evaluate the shape drawing stress, and the intermediate die shape was determined by using an electric field analysis and the average reduction ratio. In order to evaluate whether material yielding occurs at the die exit, the drawing stress was determined by using the calculated shape drawing load. Finally, FE-analysis and shape drawing experiments were conducted to validate the design of the multi-pass shape drawing process. From the results of the FE-analysis and shape drawing experiments, it was possible to produce a sound shape drawn product with the designed process. The dimensional tolerances of the product were within the allowable tolerances.

• 대한기계학회논문집A
• /
• 제28권3호
• /
• pp.267-273
• /
• 2004

The purpose of this paper is to develop a systematic design method for the suspension system hard points and compliance elements, which have great influence on the handling stability of a vehicle. In this paper, a method to optimize J-turn responses is presented based on the principles of design of experiments, multi-body dynamic analysis and optimum design technique. The design variables associated with the J-turn maneuver are selected through the experimental design sensitivity analysis using the perturbation method. An objective function is defined as an approximate function for the J-turn characteristics using the TSA(Taylor series approximation). The values of the design variables, which make the optimized J-turn characteristics, are obtained using the conjugate gradient method. The result of the J-turn simulation shows that the optimized vehicle has more improved handling stability than the optimized vehicle.