• 소성∙가공
• /
• 제15권3호
• /
• pp.226-231
• /
• 2006

The fuel injector is a pa.1 that controls the fuel supply of automotive engine. The housing of the fuel injector supports the rod, the needle valve and the solenoid. In this study, the rigid-plastic FE-analysis by using the design of experiments (DOE) and the response surface methodology (RSM) has been performed to produce the product reducing the under-fill and the maximum effective strain. From the results of DOE, the stem of counter punch and the face angle of punch at the $1^{st}$ process, and the stem of punch at the $2^{nd}$ process were determined as the significant design variables far each response such as the upper under-fill, lower under-fill and the maximum effective strain. From the results of RSM, the optimal values of the design variables have been also determined by simultaneously considering the responses.

• 소성∙가공
• /
• 제8권4호
• /
• pp.356-363
• /
• 1999

This paper discusses some techniques for the determination of optimum blank size and pre-form design for multi-stepped deep drawing of oval shell. The deep drawing process of oval shape has been regarded as more difficult than that of cylindrical shell because of its complicated behavior of plastic deformation. But there is insufficient information in this area to carry out successful deep drawing work of irregular products such as oval, rectangular, and square shapes. In order to find the optimum conditions, the drawing apparatus for two kinds of pre-form design are built, a series of drawing experiments performed, and thickness stain distributions measured. From the results of thess suggested experiments, various optimum process variables are observed and discussed.

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.68-73
• /
• 2009

The bar horn is designed to increase uniformity of the displacement on the output face through simulation and experiments. Three-dimensional modal analysis is conducted using the finite element method to calculate the vibration mode and displacement on the output face, and the design of experiment (DOE) technique is employed to determine the optimum dimensions of the groove and slot so that the high amplitude uniformity of the bar horn is produced. Displacement of the bar horn was measured using the Laser Doppler Vibrometer (LDV), and the experimental results show good agreements with the predicted results. High uniformity of the bar horn is achieved with the dimensions of the groove and slot determined using the design equations.

• 반도체디스플레이기술학회지
• /
• 제12권1호
• /
• pp.47-51
• /
• 2013

The screen printing is a process that is widely used in manufacturing process of various fields such as flexible devices, portable multimedia devices, OLED, and the solar cell. The screen printing method has been studied as a method for forming the high precision micro-pattern, making the low-cost manufacturing process and reducing cost through improvement of productivity. It is applicable to deposit and forming the pillars which are one of the core element for comprising vacuum glazing. In this paper, by using the paste of the glass frit base, the screen printing was performed. We analyzed the effect for the printing process to deposit pillar paste on the screen printing parameters by the factorial experimental design. The polynomial predicting the volume of the printed supporting pillars was drawn by using screen printing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1529-1532
• /
• 2003

This paper deals with the impact analysis of the impact absorbing system consist of one degree of freedom and two degree of freedom damping-spring system in spreader to increase efficiency of it. It shows the optimum damping coefficient and spring constant of impact absorbing system using for crane spreader and the optimum condition of impact absorbing system causing certain contact impulse. In the optimal model, the contact impulse is reduced 98.57 percent and 92.22 percent respectively.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.133-139
• /
• 2008

With the increasing demand for higher production quality and growing competition in the global market, coordinate measuring machine(CMM) has been widely used in industry to improve the efficiency and effectiveness of measurement. In this paper the performance evaluation of coordinate measuring machine is proposed using design of experiments. A factorial design is applied to carry out the performance test proposed by ISO 10360 with a length bar and to investigate CMM measurement errors associated to orientation and length in the work volume. The determination of the significance of effects in an experiment is made through the analysis of variance(ANOVA). The results show that the proposed method is suitable to analyze the factors which affect the CMM measurement performance.

• Journal of the Korean Statistical Society
• /
• 제17권2호
• /
• pp.121-133
• /
• 1988

In this paper a class of mixture designs for estimating the slope of second order Scheffe polynomial response surfaces for mixture experiments with q components is presented. The variance of the estimated directional slope at a point is a function of the direction of the slope and the design. If the variance is averaged over all possible directions in the (q-1)-dimensional simplex, the averaged variance is only a function of the point and the design. By choice of design, it is possible to make this variance constant for all points equidistant from the centroid point. This property is called "slope-rotatability over al directions in the simplex", and the necessary and sufficient conditions for mixture design to have this property are given and proved. The class of designs with this property is compared with other mixture designs and discussed.discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.393-396
• /
• 1997

High-speed machining is one of the most effective technologies to improve productivity. Because of the high speed and high feed rate, high-speed machining can give great advantages for the machining of dies and molds. This paper describes on the improvement of machining accuracy in high-speed machining. Depth of cut and feed rate are control factors. The effect of the control factors on machining accuracy is investigated using two-way factorial design.

• 동력기계공학회지
• /
• 제22권1호
• /
• pp.18-24
• /
• 2018

This paper focuses on systematic design about the membership ranges of the main design factors such as control error, control error rate, and sampling time for the fuzzy logic control of the variable speed drive refrigeration cycle. The upper and the lowest limit of the membership ranges are set up from the data of static characteristics obtained by experiments. Three kinds of membership ranges on the control error and the control error rate are tested by experiments. Especially, an effect of sampling time on control performance is also investigated in the same way. Experimental data showed the control error rate and the sampling time strongly effected on the control performance of the refrigeration cycle with a variable speed drive.

• 한국수소및신에너지학회논문집
• /
• 제20권6호
• /
• pp.492-498
• /
• 2009

Six sigma methode was applied for optimization of flow field design of a proton exchange membrane fuel cell (PEMFC). The optimization between number of channel and channel/rib width was suggested in this paper with six sigma method. With the help of six sigma design of experiment (DOE) the number of experiments may be reduced dramatically. The fuel cell channel design optimization with results of these experiments with a 100 $cm^2$ serpentine flow field indicates a optimization data for a given constant operating conditions.