• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.56-61
• /
• 2011

Alkyl vinyl ethers such as methyl vinyl ether, propyl vinyl ether, isopropyl vinyl ether, butyl vinyl ether and isobutyl vinyl ether are usually used as industrial solvents and chemical intermediates in the chemical or pharmaceutical industry. Recently, they are popularly used as raw materials for polymer electrolyte membrane fuel cells and as cellulose dyeing assistants. However, very few investigations about process design and operation data were reported for alkyl vinyl ether compounds and there are no data for propyl vinyl ether(PVE) systems as far as we know. In this work, the isothermal VLE data are reported at 333.15 K for the ternary systems of {PVE + ethanol + benzene} by using headspace gas chromatography(HSGC) and these VLE data were correlated using Wilson, NRTL and UNIQUAC equations. The excess volumes($V^E$) and deviations in molar refractivity(${\Delta}R$) data are also reported for the sub binary systems {PVE + ethanol}, {ethanol + benzene} and {PVE + benzene} at 303.15 K. These data were correlated with Redlich-Kister equation. In addition, isoclines of $V^E$ and DR for ternary system {PVE + ethanol + benzene} were also calculated from Radojkovi equation.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.1
• /
• pp.59-65
• /
• 2010

The purpose of this study is to analyze the risk of the forest fire, considering the topography and the forest, for establishing disaster prevention measures of cultural heritage, Uireung, over in Cheonjang-mountain. To do that, we estimate the occurrence and spread of the forest fire over in Cheonjang-mountain through a forest fire probability model(logistic regression), using the space characteristic data($100m{\times}100m$). The factor, occurrence of the forest fire, are diameter class, southeast, southwest, south, coniferous, deciduous, and mixed forest. We assume the probability of the fire forest in each point as follow : [1+exp{-(-4.8081-(0.02453*diameter class)+(0.6608*southeast)+(0.507*southwest)+(0.7943*south)+(0.29498*coniferous forest)+(0.28897*deciduous forest)+(0.17788*mixed forest))}]$^{-1}$. To divide dangerous zone of the big forest fire, we make the basic materials for disaster prevention measures, through the map of coniferous forests, deciduous forests, and mixed forest. The damage of cultural heritage caused by a forest fire will be reduced through the effective preventive measures, by forecast a forest fire to using this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.157-163
• /
• 2016

BIM is currently applied in some domestic construction firms, but it is not being actively utilized due to changes in working environments and qualms about new studies. In order to utilize a BIM model in the design phase, process information is needed during construction, but the input system and utilization method of the process information's state are not complete. Therefore, we propose a BIM template for construction progress management that can show basic BIM information as the construction progresses in an easy and convenient way. This method will facilitate the adoption of BIM and enhance the productivity of construction companies. To this end, we designed a progress explorer for step-by-step progress and work schedules, and we generated three-dimensional views and a progress list by applying unit information (primary units, part units, and detail units) of the work breakdown structure (WBS) to the parameters. To use the BIM template, work progress information is input to the BIM modeling objects through Dynamo. We also used Dynamo for quick and easy calculation of the quantity of materials needed for construction work. To test the BIM template, we applied it to an actual project and evaluated its visibility and a progress list. The results showed that the proposed BIM template facilitates progress management of a project and can thus facilitate the adoption of BIM and improve the productivity of construction companies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6925-6931
• /
• 2015

LED(Light Emitting Diode) is used in various filed like a display because of low power consuming, long life span, high brightness, rapid response time and environmental-friendly characteristic. General fabrication method is combination blue light LED chip with yellow fluorescent substance. Because this way is suitable for industry field in terms of convenience, economic, efficiency. In white light LED packaging process, encapsulation process that is dispensing fluorescent substance with silicon to blue light LED chip is most important. So, in this paper we develop EHD pump system using voice coil motor and electrostatic pump for dispensing fluorescent substance. For these things we conduct basic test about liquid surface profiles by voltage and process time. Through this data we decide optimal process condition and verify the optimal condition using design of experiment method. And to confirm uniformity of the condition, we conduct repeat dispensing test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.284-295
• /
• 2012

The purpose of this study was to develop and evaluate patient safety reporting promoting strategy for nurses to improve nursing care quality. The process included three phase - construction, implementation and evaluation phase. Before the construction phase has two kinds of subcategories as analysis and verification. Analysis phase was consisted of literature review and field study, and verification was conducted by two specialist. At the construction phase, patient safety reporting system, educational materials, planning for public relation, and reward preparation were developed. After implementation during 12 weeks, we evaluated pre-post scores of satisfaction, stress of conscience, job performances. The participants were 51 nurses working for a hospitals. The program was developed and then administered to the experimental group for 12 weeks. One group pretest-posttest design was used for this study. Data were analyzed using descriptive analysis, paired t-test with the SPSS WIN 18.0 program. After the intervention, job performance scores improved significantly from 3.62 to 3.75(t=2.653, p=.009). But job stress didn't changed significantly(t=.785, p=.434). These strategy can be applied to many clinical setting that will be helpful to promote patient safety reporting for nurses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.509-517
• /
• 2020

This study evaluated the importance of technical characteristics in manufacturing street furniture using 3D printing technology to suggest the direction of development of high priority 3D printing technology. The importance was analyzed by the QFD, quantified by scores and the priority of the items was summarized. As a result, the 'output size', 'shrinkage of material', and 'output angle' were derived as technical elements that should be prioritized in development and research. For verification, the design of atypical street furniture was made into a large 3D printed output and the development direction was suggested by applying the technical elements of priority during the manufacturing process. Street furniture should be designed based on functionality and stability, as well as economic efficiency, productivity, and aesthetics. Therefore, the 'output size' ensured stability by minimizing the division of parts, and the 'contractability of materials' satisfied the aesthetic and productivity by minimizing the error of form. Finally, the 'output angle' was verified by improving the quality of the output and selecting an angle with efficient and structural stability through various output angles.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.45-52
• /
• 2015

Fiber-reinforced polymer (FRP) has been generally accepted by civil engineers as an alternative for steel reinforcing bars (rebar) due to its advantageous specific tensile strength and non-corrosiveness. Even though some glass fiber reinforced polymer (GFRP) rebars are available on a market, GFRP is still somewhat uncompetitive over steel rebar due to their high cost and relatively low elastic modulus, and brittle failure characteristic. If the price of component materials of GFRP rebar is not reduced, it would be another solution to increase the performance of each material to the highest degree. The tensile strength generally decreases with increasing diameter of FRP rebar. One of the reasons is that only fibers except for fibers in center resist the external force due to the lack of force transfer and the deformation of only outer fibers by gripping system. Eliminating fibers in the center, which do not play an aimed role fully, are helpful to reduce the price and finally FRP rebar would be optimized over the price. In this study, the effect of the hollow section in a cross-section of a GFRP rebar was investigated. A GFRP rebar with 19 mm diameter was selected and an analysis was performed for the tensile test results. Parameter was the ratio of hollow section over solid cross-section. Four kinds of hollow sections were planned. A total of 27 specimens, six specimens for each hollow section and three specimens with a solid cross-section were manufactured and tested. The change by the ratio of hollow section over solid cross-section was analyzed and an optimized cross-section design was proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.361-367
• /
• 2011

The channel-forming discharge, which is a standard and single flow for the river maintenance and restoration project, should be estimated necessarily in the stable channel design. It is difficult to produce the specific pattern for the channel-forming discharge in the domestic rivers due to the insufficient researches and case studies. Also, it is improper to adopt the foreign cases for the domestic rivers and streams which have the high coefficients of river regime. Therefore, the channel-forming discharge possible to use for rivers with high coefficients of river regime is suggested in this study through analyzing the bankfull, specified recurrence interval, and effective discharges of Mangyeong River, Cheongmi Stream, and Hampyeong Stream for the abandoned channel restoration project. The bankfull discharge was calculated with geometric data using the HEC-RAS modeling and the flow, bed materials, and sediment data for the study reaches were used to estimate the specified recurrence interval and effective discharges. As a result for calculating the channel-forming discharge, the effective discharge was greater than the bankfull discharge in the river with high coefficient of river regime and the effective discharge was greater than the bankfull and there was no correlation between the coefficient of river regime and the characteristics of the specified recurrence interval discharges.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6C
• /
• pp.251-258
• /
• 2011

Steel pipe piles have been used as various deep foundation materials for a long time. Recent increase in steel material cost has made engineers reluctant in using it even with its good quality and ease of construction. Therefore when constructing with steel pipe pile, the decision to reuse the excessive pile length that is cut off from the designed pile head elevation after pile driving can be cost saving. This has caused many constructors to reuse the pile leftovers with new piles, but the absence of quantitative structural capacity behaviors of steel pipe pile after pile driving or appropriate countermeasures and standards in reusing steel pipe pile has resulted in wrong applications, pile structural integrity problems, inappropriate limitation of reusable pile length, etc. The structural performance analysis between a new pile and a pile that has undergone working state and ultimate state stress level during pile driving was performed in this research by means of comparing the results between the dynamic pile load test, tensile load test, charpy energy test and fatigue test for high strength steel of $440N/mm^2$ yield strength. Test results show that under working load conditions the yield strength variation is less than 2% and for ultimate load conditions the variation is less than 5% for maximum total blow count of 3000. The results have been statistically analyzed to check the sensitivity of each factors involved. From the test results, reusability of steel pipe pile lies not in the main pipe yield strength deviation but in the reduction of absorb energy, strength changes and quality control at the welded section, shape deformation and local buckling during pile driving.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.79-86
• /
• 2015

Purpose - The cosmetics industry is a traditional high value-added industry in terms of the domestic demand, small batch production systems, exclusive competition, and raw materials highly dependent on overseas countries as well as an oligopolistic market structure. However, new foreign brands and growing consumer awareness of inexpensive products, has triggered a shift. In line with changing lifestyles and the polarization of consumption, the industry faces a new market structure. Among its key characteristics is the cosmetics industry's numerous distribution channels (i.e., department stores, door-to-door sales, online shopping malls, brand shops, and discount stores). Therefore, the study of its distribution channels is essential. Research design, data, and methodology - The study analyzed channel distribution power divided into coercive and non-coercive power. The factors of coercive power included: unilateral request of an increase in commissions, interference in sales by taking advantage of a superior status, unilateral buck-passing at the time of a problem, unilateral request to stop sales activities, and a unilateral business contract; the factors of non-coercive power included favorable payment conditions, offers of various kinds of information, policy on commission reduction, pride in market entrance, and promotion support. In addition, the mediating variable "interdependence" was applied to the execution of department store (or mart) power and their shop conflicts and satisfaction to examine direct and indirect influential power. The methodology was a survey of managers of cosmetics shops in department stores (or marts). The questionnaire, based on a five-point Likert scale, included questions about basic personal information, execution of power, interdependence, conflict, and satisfaction. The study distributed 198 questionnaires and collected 131. Ten questionnaires with missing or hard to analyze data were excluded. Thus, 121 copies were analyzed. Results - According to the analysis, the execution of coercive power by department stores (or marts) did not affect interdependence, but the execution of non-coercive power did. Interdependence did not influence conflict, but did affect satisfaction. Additionally, the analysis revealed direct influential power: the execution of coercive power positively affected conflict and negatively influenced satisfaction; the execution of non-coercive power positively affected satisfaction. Conclusions - To offer suggestions for distribution business relations in the cosmetics industry, this study investigated how the execution of power by department stores (or marts) affected their shops. More specifically, it examined how much the execution of both coercive power and non-coercive power influenced conflict and satisfaction, and analyzed the mediating role of interdependence. In line with previous study results in various areas, coercive power was shown to be the source of conflict, leading to a decrease in satisfaction, whereas non-coercive power significantly positively influenced satisfaction. Moreover, non-coercive power increased interdependence, which led to greater satisfaction. As a result, interdependence had a mediating effect on non-coercive power and satisfaction. Based on the results, department stores (or marts) should look for improvements plans that increase interdependence. Such plans could alleviate conflict with the shops, increasing their satisfaction.