• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.141-150
• /
• 2006

The animation should be produced to attract the audience's interests. Its characters will have the intended personalities through the interactions with the audiences, discarding the attributes of the nature. These personalities form the brand identity when they are exposed visually and will be powerful brand assets which lead the animation industry to the high-value added products. The brand identity of the character, the brand assets, can be used for various products in form of licensing and is noted to make an affirmative leverage effect. In this regard, the author has conducted an empirical research on the animation characters from the viewpoint of the brand, adopting, in particular, the Brand Personality Scale (BPS), which is the output of J. Aaker's (1997) study on brand personality defined as the human properties in relation with the brand. In addition, this study determines the correlation among the animation, brand and consumers based on the Sirgy's study (1982) resulting in that the better the brand and the consumer's personality are matched, the more the brand attitude is improved. In consequence, it is found that the animation characters have three personality levels such as refinement/ability, integrity and interests. The consumer's personality is divided into the 'practical ego-image' and the 'ideal ego-image' in the survey, and the survey result shows that the brand personality of the animation character exists between them.

• Journal of the Korean Society for Library and Information Science
• /
• v.50 no.3
• /
• pp.293-308
• /
• 2016

Many universities are offering some of their offline courses for anyone to learn free online as an MOOC format. University libraries In response to changing university conditions, foreign university libraries are struggling to redefine their roles and provide new services. This study aimed to find the trends and models to support MOOCs in foreign libraries and Library and information science domain by conducting a systematic review of studies on foreign library and information journals which have been published from 2012 to 2015. A total of 34 out of 348 studies were included in the final analysis. This study also aimed to present the limits and the future models of MOOC support direction. The relevant articles could be identified, two criteria: 24 MOOCs studies relating to Libraries and 10 MOOCs studies related to LIS. The selected articles were summarized and analyzed yearly. The study identifies elements of library MOOC support models in 5 areas including MOOC design (copyright clearance and consulting, content licensing, open content), production support (course production, video editing, librarian MOOC production), management support (instructional design and content creation, students support), evaluation (MOOC data collection, analysis), reuse (MOOC metadata management, archive structure). Based on these findings, this study suggested the models of library MOOC support and set the theoretical fundamentals.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.8
• /
• pp.287-296
• /
• 2018

In the recent commercial DBMS market, as the users' burden and complaint which are related to high price licensing policy and late technical support service are increasingly rising, the concern for use of open source DBMS which has no problem with compatibility or stability is escalating. Due to the fact, the cases saving the cost are growing by converting Oracle Corporation's applications, which has about 60% share in the DBMS market, to an open source DBMS. However, in converting non-interchange sentences to an ANSI standard-based open source DBMS because of the use of PL/SQL in Oracle Corporation provides, a lot of manual work accompanies, so there is a lot of loss of time and money. Therefore, a tool that automatically converts PL/SQL to standard SQL is required. The proposed automation tool for the conversion of applications converts PL/SQL to Java Stored Procedure, an open source DBMS-based ANSI standard programming language. Through carrying out a test on the automation tool, it is proved that the tool will contribute to shortening time and saving cost by verifying the identity of input-output data and its reliability after correcting errors in converting to Java Stored Procedure.

• The Journal of the Korea Contents Association
• /
• v.5 no.1
• /
• pp.27-35
• /
• 2005

Recently, despite of the rapid progress of information technology in the medical and health fields, the development and management of problem sets about medical and education contents related with radiological technologist has been still achieved by manual and offline method using document editor. In this study, the unique web-based problem management system is designed and implemented. That system can efficiently manage and present various kind of problem set about integrated education and personal license without time and space limitations in order to improve the efficiency of supplementary training and to obtain the professional license for CT radiological technologist. The proposed system is composed of administration module and user module. The former supports several functions such as problem creation, problem categorization, user management, and adjustment of leveled assessment. On the other hand, the latter functions examination applying , problem retrieval, personal score retrieval, and interpretation viewing, and so on. In addition, our system is expected as a useful and practical system which provides problem interpretation and analysis of score results after applying for the examination. It can elevate ability of learning and information interchange among them preparing for CT professional radiological technologist licensing examination

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.2
• /
• pp.15-26
• /
• 2020

Many companies are increasing the use of characters to enhance brand image and brand value. The use of characters in the certain industry is active, however, the research on characters in academia is insufficient. The purpose of this study is to investigate how characteristics of characters affect on consumer's brand attitude and to suggest the guideline companies to concern on brand characters, in especial on designing or licensing them. The results showed that all characteristics of character positively influenced on brand attitude. Among nine characteristics of the character, trust was the most impact and nostalgia was the least impact on brand attitude, respectively. Perceived quality was mediated on in relations between the brand character and brand attitude. In indirect effect, familiarity was the most impact on brand attitude. In sum, we suggested that trust and familiarity of the character are the most weighted characteristics on brand character design strategy.

• International Journal of Knowledge Content Development & Technology
• /
• v.14 no.2
• /
• pp.29-46
• /
• 2024

Academic libraries are at the forefront of supporting their parent institutions in teaching and learning, research activities, and community services for the students and faculty members, but, the researchers observed that some of the research emanating from faculty members in academic institutions particularly universities remains largely unknown, unrecognized and invisible on the global scene. This present paper is therefore a modest attempt towards addressing the issue of enhancing the faculty research visibility in the institutions of higher learning by the academic libraries. It also examines the extent academic libraries in public universities in Nigeria use research visibility channels to increase the global visibility of their faculty members. Difficulties encountered by librarians and ways of tackling the visibility of the faculty were also examined. A descriptive survey research design was adopted and the population consisted of all the 162 librarians in public universities in South-East (S.E), Nigeria. Telephone calls and Online Questionnaire were used for data collection. The number of librarians was obtained through phone calls from the Heads of each of the Libraries. The Online Questionnaire was submitted to the WhatsApp platforms of librarians in Nigeria- Academic and Research Libraries (ARL) and Chartered Librarians in Nigeria Connect (CLN-Connect). The questionnaire was structured in such a way that only the Librarians in Public universities in the S.E. Nigeria will respond to it. At the end of the day only 120 librarians responded, at a response rate of 74%. The study was analysed using tables, percentages and charts. The study recommended that librarians who are unaware of RVCs and its utilization should go for training to acquire the knowledge that will enable them enhance the global visibility of faculty staff, Management of Public universities in S.E, Nigeria should in addition to addressing copyright issues by the use of disclaimer notices and creative common licensing and provision of infrastructural facilities e.g. steady power supply, High power brand Internet connectivity, establishment of an Institutional Repository, etc, also should mandate the faculty staff to release their productive work to the library for onward submission to the RVCs platforms for enhancement of their global visibility.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.457-468
• /
• 2020

Problems arising during pile design works for plant construction, civil and architecture work are mostly come from uncertainty of geotechnical characteristics. In particular, obtaining the N-value measured through the Standard Penetration Test (SPT) is the most important data. However, it is difficult to obtain N-value by drilling investigation throughout the all target area. There are many constraints such as licensing, time, cost, equipment access and residential complaints etc. it is impossible to obtain geotechnical characteristics through drilling investigation within a short bidding period in overseas. The geotechnical characteristics at non-drilling investigation points are usually determined by the engineer's empirical judgment, which can leads to errors in pile design and quantity calculation causing construction delay and cost increase. It would be possible to overcome this problem if N-value could be predicted at the non-drilling investigation points using limited minimum drilling investigation data. This study was conducted to predicted the N-value using an Artificial Neural Network (ANN) which one of the Artificial intelligence (AI) method. An Artificial Neural Network treats a limited amount of geotechnical characteristics as a biological logic process, providing more reliable results for input variables. The purpose of this study is to predict N-value at the non-drilling investigation points through patterns which is studied by multi-layer perceptron and error back-propagation algorithms using the minimum geotechnical data. It has been reviewed the reliability of the values that predicted by AI method compared to the measured values, and we were able to confirm the high reliability as a result. To solving geotechnical uncertainty, we will perform sensitivity analysis of input variables to increase learning effect in next steps and it may need some technical update of program. We hope that our study will be helpful to design works in the future.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.597-616
• /
• 2013

Character industry is not only knowledge-based industry chiefly with copyrights but also motive power for creative economy to take a role functionally over the fields of industries because it has industrial characteristic as complement product to promote sale value in manufacturing industry and service industry and increase profit on sales. Since 2003, the national policy related to character has aimed to maximize effect among connected industries, extend its business abroad, enforce copyrights through the improvement of marketing system, develop industrial infrastructure through raising quality of character products. With the result of this policy, the successful cases of connected contents have been crystallized and domestic character industry has stepped up methodically since 2007. It is needed to reset the scales of character industry and industrial stats because there are more know-how of self industry promotion and more related characters through strategy of market departmentalization starting with cartoon, animation, games, novels, movies and musicals. Especially, The Korea government set our target for 'Global Top Five Character Power' since 2009 and has started to carry out to find global star characters, support to establish network among connected industries, diversify promotion channels, and develop licensing business. Particularly, since 2013, There have been prospered the indoor character theme park with time management just like character experimental marketing or Kids cafes using characters, the demand market of digital character focusing on SNS emoticon, and the performance market for character musical consistently. Moreover, The domestic and foreign illegal black markets on off-line have been enlarged, so we need another policy alternative. To prepare for the era of exploding character demand market and diversifying platform, it is needed to set up a solid strategy that is required the elements of policy changes in character industry to vitalize character industry and support new character design and connected contents. the following shows that the elements of policy changes related to the existing policy, the current position of market. Nowadays, the elements of policy changes in domestic character industry are that variety of consumers in the digital character market according to platform diversification, Convergence contents of character goods for the Korean waves, legalization of the illegal black contents market, and controling the tendency of consumers in departmentalized market. This can help find the policy issue entirely deferent with the existing character powers like US, Japan or Europe. In its final analysis, the alternatives are the promotion of models with contract copyrights of domestic and foreign connected contents, the diversification of profit models of platform economy, the additive development of target market related to enlarging the Korean waves, and the strategy of character market for the age-specific tendency according to developing character demand market.