• 대한가정학회지
• /
• 제37권7호
• /
• pp.17-27
• /
• 1999

According to the design method for constructing the Korean Men's Jo-go-ri(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic pattern Jo-go-ri, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip(Dongjung) was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symmetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar(Kit) and the collar strip create a visual effect by equalizing the lengths of the two sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since there is no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial regulation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment, can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the basic pattern design is as follows: 1) The conic angle for the Jo-go-ri's girth, length end neck width is fixed at 70(72) degree. 2) The radius of the cone is sleeve length. 3) The bust girth calculation formula is B/4 + 2.5 cm. 4) The armhole formula is B/4 + 2.5cm. 5) The neck width formula is B/10. 6) The ratio of the collar junction{width of collar(Kit) + width of collar strip(Dongjung) to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius of sleeve length, that is an arc that exceeds the length of the Jo-go-ri's midsection.

• 패션비즈니스
• /
• 제24권5호
• /
• pp.106-124
• /
• 2020

The purpose of this study was to analyze the three-dimensional (3D) characteristics and reproducibility of the effective expression of North American smocking pleats in the process of making clothes using a 3D virtual clothing system (CLO) and present a method of expression according to the types of North American smocking. In this study, lattice, lozenge, and flower smocking were produced as real smocking and 3D virtual content, and actual muslin properties were measured using a Fabric Kit and reflected using an emulator. The results of this study confirmed that a dense puckered design such as North American smocking could be expressed depending upon the internal line, fold angle, and reinforcement setting for 3D smocking. To partially apply pleats to flat fabrics, it was necessary to set fold lines. The fold line setting could be expressed by designing the internal line in horizontal, vertical, and diagonal directions according to the North American smocking design, and then setting the fold angle for each internal line. By setting fold angles of 0 degrees and 360 degrees according to the folding direction of the set internal line, the fabric was clearly folded and stable pleats were created. This study will contribute to the vitalization of the 3D virtual fashion content industry by analyzing and presenting the optimal expression method of sophisticated and complex pleats generated according to the North American smocking design pattern.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.129-131
• /
• 2004

Elliptic Curve Cryptography (ECC) coprocessors support massive scalar multiplications of a point. We research the design for multi-segment multipliers in fixed-size ECC coprocessors using the multi-segment Karatsuba algorithm on GF($2^m$). ECC coprocessors of the proposed multiplier is verified on the SoC-design verification kit which embeds ALTERA EXCALIBUR FPGAs. As a result of our experiment, the multi-segment Karatsuba multiplier, which has more efficient performance about twice times than the traditional multi-segment multiplier, can be implemented as adding few H/W resources. Therefore the multi-segment Karatsuba multiplier which satisfies performance for the cryptographic algorithm, is adequate for a low cost embedded system, and is implemented in the minimum area.

• 한국정보통신학회논문지
• /
• 제8권5호
• /
• pp.1042-1049
• /
• 2004

본 논문에서는 LipSynchco 소프트웨어 개발 키트(SDK)를 사용하여 아바타 기반 교육용 멀티미디어 컨텐츠 저작시스템을 설계하고 구현하였다. 모션생성 엔진과 음성 동조화 엔진을 연동함으로써 아바타의 움직임을 자동으로 생성하여 이를 교육용 멀티미디어 컨텐츠 저작 틀과 결합하여 보다 나은 교육용 컨텐츠를 생성할 수 있도록 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.137-140
• /
• 2005

The electronic dispenser is composed of electronic part and mechanical part. Electronic part is consisted of input keypad, micro-controller, display module, and pump module. In this paper we designed micro-controller for electronic part. The micro-controller controls display module and pump module. The display module is composed by LCD device, and the pump module is composed by motor device. The micro-controller for an electronic dispenser is designed by VHDL. We used WX12864APl for the LCD device and SPS20 for the stepping motor. Also, the micro-controller is designed by Altera Quartus tool and verified with Agent 2000 Design-kit using APEX20K Device. In this paper, we present possibility to adopt of biotechnology field through designing of one-chip controller for an electronic dispenser.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.16-18
• /
• 1997

There have been great advances in communication and networking in recent times. It is necessary to take advantage of this information infrastructure for the purpose of developing an engineering education system. But the networking system was expensive or hard to develop. The current international networking is converging to the use of the World Wide Web system. It has become a new standard for global network communication. But there are not a great number of applications which take full advantage of this environment. In this Imper, an interactive education system for engineering education using the World Wide Web will be presented. This can be used as a supplementary kit for engineering education of synchronous machine design. The system is developed using JAVA and can be accessed using Web browsers.

• 해양환경안전학회지
• /
• 제1권2호
• /
• pp.83-94
• /
• 1995

The purpose of this paper is to develop an integrated environment system for finite element structural analysis using OOA(Object-Oriented Analysis) and OOD(Object-Oriented Design), with may reduce inconveniencies in use such as file input of macro command and improve lacks of graphic presentation in the established finite element analysis program. This paper is attempted to suggest an easy approach to object-oriented concept and convenient programming. Two languages are used together in this paper instead of single C++ language for the development of object-oriented program. : Visual Basic with CDK(Custom Development Kit), and Borland C++ with OWL(Object Windows Library).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.27-29
• /
• 1997

There have been great advances in communication and networking in recent times. It is necessary to take advantage of this information infrastructure for the purpose of developing an engineering education system, but the networking system was expensive or hard to develop. The current international networking is converging to the use of the World Wide Web system. It has become a new standard for global network communication. But there are not a great number of applications which take full advantage of this environment. In this paper, an interactive education system for engineering education using the World Wide Web will be presented. This can be used as a supplementary kit for engineering education of DC machine design. The system is developed using JAVA and can be accessed using Web browsers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.312-315
• /
• 1998

There have been great advances in communication and networking in recent times. It is necessary to take advantage of this information infrastructure for the purpose of developing an engineering education system. But the networking system was expensive or hard to develop. The current international networking is converging to the use of the World Wide Web system. It has become a new standard for global network communication. But there are not a great number of applications which take full advantage of this environment. In this paper an interactive education system for engineering education using the World Wide Web will be presented. This can be used as a supplementary kit for engineering education of transformer induction motor design. The system is developed using JAVA and can be accessed using Web browsers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2956-2958
• /
• 2000

This paper describes the design of a real time traffic data acquisition system using loop detector and piezzo sensor. Loop detector is the cheapest method to measure the speed and piezzo is used to detect the vehicle axle information. A ISA slot based I/O board is designed for data acquisition and PC process the raw traffic data and transfer the data to the host system. Simulation kit is designed with toy car kits. simulated loop detector and piezzo sensor. The data acquisition system collects up to 10 lane highway traffic data such as vehicle count. speed. length axle count. distance between the axles. The data is processed to generate traffic count, vehicle classification, which are to be used for ITS. The system architecture and simulation data is included and the system will be tested for field operation.