• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.305-308
• /
• 2002

This paper proposes a control board that includes PNP function with extensibility and effective allocation of allocation. The object of study is to overcome limited extensity of old systems and it is to reuse the system. The system recognizes automatic subsystem from application of main system with board level that is using hardware and software co-design method. The system has both function of main-board and sub-board. So one system can operate simultaneously such as module of alien system. This system has advantages that are fast execution, according as process functional partition to hardware/ software co-design and board size is reduced as well as offer extensity of development system. We obtained good result with control board for existent Z-80 training kit.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.651-654
• /
• 2005

In this paper, we designed ECC(Elliptic Curve Cryptographic) Processor with Bus-splitting mothod for embedded SoC. ECC SIP is designed by VHDL RTL modeling, and implemented reusably through the procedure of logic synthesis, simulation and FPGA verification. To communicate with ARM9 core and SIP, we designed SIP bus functional model according to AMBA AHB specification. The design of ECC Processor for platform-based SoC is implemented using the design kit which is composed of many devices such as ARM9 RISC core, memory, UART, interrupt controller, FPGA and so on. We performed software design on the ARM9 core for SIP and peripherals control, memory address mapping and so on.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.766-771
• /
• 2001

Gas-assisted injection molding is an innovative low-pressure injection molding technique that can provide numerous benefits such as reduced part warpage, excellent surface quality without sink marks, low injection pressure, and greater design flexibility. However, the adoption of gas-assisted injection molding may cause unexpected defects if the gas channel design is not conducted properly. The objective of this paper is to broaden the understanding of gas-assisted injection molding by summarizing the design procedures and experimental results of the gas-assisted injection molding of a 17" flat monitor front cover. The gas channels were designed by using Moldflow(MF/GAS) simulations and a 450 ton injection molding machine with a 5 stage pressure control gas kit was used in the experiments.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.397-400
• /
• 2006

The multi-layer advanced high-performance bus (ML-AHB) BusMatrix proposed by ARM is an excellent architecture for applying embedded systems with low power. However, there is one clock cycle delay for each master in the ML-AHB BusMatrix of the advanced microcontroller bus architecture (AMBA) design kit (ADK) whenever a master starts new transactions or changes the slave layers. In this letter, we propose an improved design method to remove the one clock cycle delay in the ML-AHB BusMatrix of an ADK. We also remarkably reduce the total area and power consumption of the ML-AHB BusMatrix of an ADK with the elimination of the heavy input stages.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.133-143
• /
• 2020

Purpose: This study aims to derive a predictive empirical equation for PGV prediction from P-wave using earthquake records in Korea and to verify the reliability of Onsite EEW. Method: The noise of P wave is removed from the observations of 627 seismic events in Korea to derive an empirical equation with PGV on the base rock, and reliability of Onsite alarms is verified from comparing PGV's predictions and observations through simulation using the empirical equation. Result: P-waves were extracted using the Filter Picker from earthquake observation records that eliminated noises, a linear regression with PGV was used to derive a predictive empirical equation for Onsite EEW. Through the on-site warning simulation we could get a success rate of 80% within the MMI±1 error range above MMI IV or higher. Conclusion: Through this study, the design feasibility and performance of Onsite EEWS using domestic earthquake records were verified. In order to increase validity, additional medium-sized seismic observations from abroad are required, the mis-detection of P waves is controlled, and the effect of seismic amplification on the surface is required.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.762-769
• /
• 2009

A canoe is one of the most popular boats in leisure on the water. Generally canoe has been built by good wooden strips. And canoe built by FRP is used for business recently. But by the users' demands for good quality and the restriction to environmental pollution the wooden canoes are required for personal and canoe building business. The modern wooden canoes were built by the strip construction method are used typically. However it is not suitable for the mass productivity requires effective resource operations and managements of men, materials, times, and price. On this paper the new construction method, called the piling-up laminated construction method, is studied to building a canoe using the piling-up with the laminated wooden plates gives more productivity than the others. First a canoe with various curved surfaces is designed from 3D design system. And the hull of canoe model is divided horizontally to generating the laminated plates that will be converting real wooden plates available from the market and will be routed by the manufacturing machine. After the simulating and analyzing of piling-up with the laminated plates, the canoe is building with less times, less men, less resources, and lower price than other method, avoid of the requirements of additional building tools. On the next paper the constructing of a real canoe using the manufactured wooden plates will be studied.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.253-261
• /
• 2008

Mobile games will be one of independent industries on game areas and take the fourth standing in the important platform since PC Games, TV Games, and Palm Games. There are several reasons why mobile games will differ in their platform, behaviors, and habits. According to the data of market consultation about the figure of mobile-game players throughout the world, the Mobile game will increase steadily from 780 million in 2007 to 1860 million in 2010. Also, market income will mount up from $42,100 million to $87,000 million. 3D games have been playing important roles in our lives. Satisfying users' needs in high-quality games, they have been growing and attracting more people with their powerful visual effects and the three-dimensional design player. We cannot emphasize their tremendous visual impacts and animation effects too much. This paper displays how to design 3D application based on J2ME (Java 2 Micro Edition) and shows free movement of 3D objects receiving and responding to the keyboard of mobile devices withWTK (Wireless ToolKit) simulator on the 3D screen.

• Journal of the Korean housing association
• /
• v.21 no.1
• /
• pp.67-77
• /
• 2010

Citizen participation in local redevelopment has recently been regarded as essential, since progress in democracy and diversified public interests have contributed to more importance being placed on citizen participation in the implementation of public policies. While the importance of resident participation has been increasingly emphasized in principle, in reality more effort is still required in its application. We need to develop practical strategies of collecting community opinion in order to reflect it in public policy, if we are to achieve a resident and citizen-centered society. The purpose of this study is to develop an image map construction tool that can be applied to the "Maul-Mandulgi" projects as a visualized method to facilitate the exchange of opinions and work toward agreements. The tool is intended to assist public discussion by visualizing policies and plans and reducing the possibility of misunderstanding, so that residents can properly respond to the plans. Second, this study will verify the effectiveness of the tool in the application to local community workshops. The main research method is participant observation method and field study. Major findings are as follows, First, every resident who had participated in previous workshops gathered together, used the tool and represented their opinions unusually more than once. Each resident tried to make sure that other participants appropriately understood his or her opinion. The workshop finished when all participants agreed and produced a consensus. The workshop took much less time, which is in stark contrast to previous workshops in which it took significantly more time to collect opinions. Second, it proved that residents in the redevelopment area can strike a broad agreement by themselves on a method and direction for residential improvement. In previous workshops, conflicts between residents developed over the choice between the two methods, of local improvement and total demolition prior to multi-housing construction. In this study, opinions of residents were not limited to the two methods by finding a winwin solution. Third, the use of the tool kit for image map became efficient for inactive residents to develop their own opinions in regard to the direction and orientations of the residential improvement process. In addition, for those who have either no or a slight understanding of the residential improvement projects, the tool can provide access to information and knowledge. This study concludes that the developed tool for imaging of the redevelopment projection like a design game, rather than using forms of text and speech, can be a useful tool in collecting opinions and forming an agreed opinion for forthcoming residential improvement plans.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.59-62
• /
• 2003

The purpose of this paper is to present how to implement Segment_LCD display using SoC design. The SoC design is achieved by using an ARM_based Excalibur device. The Excalibur device offers an outstanding embedded development platform with ARM922T and FPA. The design in the Excailbur device uses the embedded AR띤 Processor core and the AMBA high-performance bus (AHH) to write to a memory-mapped slave peripheral in the FPGA portion of the device. Here, Segment_LCD is one kind of memory-mapped slave peripherals. In order to Implement the Segment_LCD display based on SoC design, four steps are fellowed. At first, IP modules are made by using Verilog HDL. Secondly, the ARM processor of the Excalibur is programmed using C in ADS (ARM Developer Suite). And in the third step, the whole system is simulated and verified. At last, modules are downloaded to SoCMaster kit. Both Quartus II software and ModelSim5.5e software are the key software tools during the design.

• Journal of the Korean Home Economics Association
• /
• v.37 no.7
• /
• pp.17-27
• /
• 1999

According to the design method for constructing the Korean Men's Jo-go-ri(the traditional Korean jacket)collar, there are differences in form after its completion. In the construction design of the midsection of the gusset as in that of the basic pattern Jo-go-ri, not only was the positioning of the two sides of the collar not smooth, but also, when the collar strip(Dongjung) was attached, there would be an imbalance on one side or the other so that it was difficult to achieve symmetry. Therefore in this project, by applying the pattern design of the gusset midsection to that of the collar midsection, not only did attaching the collar(Kit) and the collar strip create a visual effect by equalizing the lengths of the two sides, but the construction was also easy. This method of construction introduces the three-dimensional aspect of the human form in its conic, spherical and cylindrical aspects, so that, through schematizing the scientific character of Korea's clothing, its appropriateness is verified. As a matter of fact, since there is no standardization of pattern whether for educational use or for mass-produced clothing, so that even the patterns used in computer-assisted design are executed according to the designer's personal skill, the reality is that after completion of construction the quality has not been uniform. For this schematization, inverse calculation of measurements pertaining to the calculation formula and of teaching materials has been referenced. In particular, the partial regulation of the calculation formula pertaining to the basic pattern construction, the method of making the collar midsection, and the construction method of the extreme and mean ratio adjustment, can be adjusted for all measurements, thereby providing the establishment of a design criterion and the possibility of the standardization of construction methods. The production method for the basic pattern design is as follows: 1) The conic angle for the Jo-go-ri's girth, length end neck width is fixed at 70(72) degree. 2) The radius of the cone is sleeve length. 3) The bust girth calculation formula is B/4 + 2.5 cm. 4) The armhole formula is B/4 + 2.5cm. 5) The neck width formula is B/10. 6) The ratio of the collar junction{width of collar(Kit) + width of collar strip(Dongjung) to the gusset length is 5:8. 7) The length of the side seam is a length intersecting the armhole line and the conic radius of sleeve length, that is an arc that exceeds the length of the Jo-go-ri's midsection.