• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.35-39
• /
• 2009

The fouling around the surface of hull and propeller caused by marine organism and sea water occur in the vessel which is taken up mooring in a quay for a quite long time. Moreover, those are able to give rise to the loss of speed performance. The purpose of underwater cleaning is to improve the performance of vessel and customer satisfaction through management for fouling condition of propeller and hull. Therefore, systematic approach in connection with underwater cleaning is required so as to obtain the stable speed performance. As a result, we evaluate the effect of propeller polishing to speed performance from the case of 115K COT and 4,250 TEU Container Ship. In addition, we issue the importance of underwater cleaning through comparison of speed results depending on conditions of hull surface painted by silicon.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1070-1073
• /
• 2004

This paper is on the development of a system for removing membranes which is designed exclusively for aircraft components. Membrane removal solution is a most critical issue in aerospace industries since a method of manufacturing the components tends to be changed from fabrication of many parts to cutting into one body. The cutting method inevitably produces a huge amount of chips and then membranes remain in the body. The membrane removal process, as a result, becomes an important issue since it is directly related to productivity. We tried to develop a new machine which will replace the conventional method that uses a handy tool. The machine has been designed for a cutting tool set to follow the unique shape of the slot in the body by a cam follower and cut the membrane automatically. The design has been checked by structural analysis: stress and vibration analysis. A prototype test has been finished. This paper summarizes a series of development process of the deburring machine and some design issues are discussed.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.12-14
• /
• 2005

Security problem has been a fundamental issue in the operation and planning of power system. Voltage instability is widely recognized as an important issue of power system blackout. As far as real-time operation is concerned, there is a need for appropriate tools to identify dangerous contingencies, assess security margins and suggest corrective actions. In this paper, we propose the framework design of Voltage Security Assessment(VSA) using QSS(Quasi Steady-State) analysis method in order to implement fast time domain simulation engine as a major part of VSA.

• Journal of Environmental Science International
• /
• v.24 no.9
• /
• pp.1211-1220
• /
• 2015

Soil is the most important factor in natural environment for bio-diversity. Urbanization and development of city devastate urban soil by the fraternization of green network and run off pollution. In these facts, preservation of soil is the main issue in maintain of quality urban environment. In order to handle this issue, the gold network that link fragment soil patches is considered in maintain quality soil. This study researched the infiltration Treebox design technique based on the Low Impact Development. This technique suggest reduction of impervious area of the soil due to urbanization. The main concept of this study is encourage more permeable surfaces in urban area by using a infiltration planter. The function of the planter is hold run off as much as possible from intensive rainfall, and utilizes it in drought season. Also, this planter provides fertile soil for organism habitat by keeping appropriate moisture supplying.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.33-36
• /
• 2010

The attention in construction Automation is getting higher since it could be the answer to the lack of skilled labor by decrease in construction population and aging which adversely affects productivity and quality in the construction site. We are on the way to develop a construction automation system adequate for domestic circumstances in Korea; it is called RCA(Robotic-crane based Construction Automation)system. Climbing hydraulic robots system is a part of RCA system and makes Construction factory(CF) climb through the guide rail on the core wall. The safety of climbing hydraulic robots system is at issue due to the overloaded weight of CF. Preventing this issue, present study did the design verification through the structural analysis and the simulation. Mock-up test also was done to analyze the drive performance of climbing hydraulic robots system.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.636-651
• /
• 2000

In these days, SNCF replace the connector wire (M-T type) with a dropper has a equivalent role and function of the one in general lines of TGV, and change the connector wire (T-T-M-M-T-T, T-T-M-M-T type, etc) into a New one has more flexible cable in parallel lines (air section air joint, etc) of TGV. The Connector wire has many problems according to a flow of excessive circulation current (or traction current) and a sudden rise of temperature on catenary when electric locomotive is running in high speed. To solve the question at issue of the connector wire in high speed railway catenary system of Fiance, SNCF return their operating experience in TGV lines to design and execution of catenary system Therefore, we have to deal with the question in design and execution of catenary system for kyoungbu HSR line because we will spend a lot of time and more money for maintenance than for construction of that.

• Korean Institute of Interior Design Journal
• /
• no.33
• /
• pp.62-67
• /
• 2002

Architecture and Film have been interested in each other since 1895. This concern manifests various aspects and is continued up to now. If we examine into detail of relationship between film and architecture, those share the integration of time and space as the art of time and space. Film makes inexpressible time into space by showing the change of space in the issue that is the merger of time and space. Then, this is the issue of movement that compiling element was intervened. And the creative space of film which is the timely expression stimulates the person to experience whole form through spatial experience. Consequently, the architecture as an image maker must be developed through a research about film as an image creator. Also a discussion about film and architecture do not apply one to the other but must be focused on the mutual relationship.

• Nuclear Engineering and Technology
• /
• v.35 no.3
• /
• pp.243-250
• /
• 2003

Nuclear power plants (NPPs) will be highly connected network enabled systems in the future. Using the network and web enabled tools, NPPs will be remotely monitored by operators at any time from any place connected to the network via a general web browser. However, there will be two major issues associated with this implementation. The first is the security issue. Only the authorized persons need to be allowed to access the plant since NPP is a safety-critical system. However, the web technology is open to the public. The second is the network disturbance issue. If operators can not access the plant due to network disturbances, the plant will come into the out-of-control situation. Therefore, in this work, we performed a conceptual design of a web-based remote monitoring and control system (RMCS) considering these issues.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.3
• /
• pp.141-147
• /
• 2002

Profile machining using cutter diameter compensation is widely used in die and mould manufacturing. Especially automotive die makers try to use 3D-profile machining for trimming or flange dies. But the technological requirements and implementation issues haven't been defined. In this paper we summarized the requirements and issues of 3D-profile machining. Approximation of input profiles into sequences of line and helical arc is the first major issue. The second major issue is removing cutter inter- ference from the approximated curves holding z-values when the maximum cutter diameter is given. Keeping constant machining width, local machining, path linking problems and several detail technological requirements are also discussed.

• Korean Institute of Interior Design Journal
• /
• no.32
• /
• pp.55-63
• /
• 2002

The purpose of this study is to research on the actual condition for remodelling of front balcony In Apartment residence. It is analysed the theorical study, Question research and the point at issue of balcony space. The results were as follows : First, it has lowered the practical use of balcony space. The resolution at issue need the plan with demand of dwellers. Second, it is classified three categories about demand of dwellers : the space of nature ＆ ecology, utility and finally rest like living function. Third, it is needed the plan that these three categories are mixed properly than separated..