• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.9
• /
• pp.44-52
• /
• 2013

This paper presents the development of 10 kW permanent magnet synchronous generator (PMSG) for small hydropower plants considering flow rates and net head. The initial and detailed design are determined using a load distribution method (LDM) which is a well-known method for designing an electric machine and a 2D-FEA which is performed for more accurate analysis of PMSG. The characteristic analysis results of proposed model with straight line magnet are satisfied with the initial model with curved magnet. Finally, the analysis and the design results are confirmed by the experimental results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.46-56
• /
• 2013

The test facility with hot-air supply system is required to develop transpiration cooling materials and experimentally evaluate its performance. In the study, the facility consists of an arc-plasma generator, plenum chamber suppling cold air, and test section was designed and an internal flow analysis was executed. From CFD results, it was confirmed that the designed plenum chamber thermally safeties and ideally mixes with plasma gas and cold air in the chamber. In addition, validity of design for supplying homogeneous flow to the test section was confirmed by this analysis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.652-654
• /
• 2016

This paper shows the Design and implementation of sinusoidal BLDC motor drive logic using SVPWM method with FPGA. Sinusoidal BLDC motor driver logic consists of sine-wave PWM generator, dead-time and lead angle control logic. PWM generator logic is designed using SVPWM method for increase of 15.5% linear domain than general sine-wave PWM. This logic is verified and implemented using Spartan-6 FPGA Board. Test results show that THD(Total Harmonic Distortion) of motor-driving current is 19.2% and rotor position resolution is 1.6 degree.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.4
• /
• pp.38-45
• /
• 2007

A liquid rocket engine fuel-rich gas generator has been developed for the first time in the country, which can produce combustion gas over the rate of 4 kg/s at 900 K and 58 bar. The gas is not only for driving a turbopump but also for providing heat source for propellant supply tanks. The final design of the gas generator had been fixed based on the concept and preliminary development tests, and was validated through structure and heat transfer analysis. The manufacturing involved precision machining, surface finish, and special welding technique. The final assessment on the characteristics of ignition and combustion had been carried out for two different versions of injector heads. This concluded that the present product satisfies the development requirements such as spatial temperature distribution and the development has been successful.

• Journal of KIISE:Information Networking
• /
• v.36 no.6
• /
• pp.552-557
• /
• 2009

One-time passwords are used just once and discarded, which makes it more secure than the repeatedly used conventional passwords. This paper proposes a challenge-response based one-time password generator on a user's mobile phone always carried with the user. The generator can provide an additional authentication for a user to issue a money transfer request within his Internet banking session on a PC. A currently used device for Internet banking generates a password that changes every 30 seconds or so, which allows a man-in-the-middle to use it for stealing money within the 30 seconds. Unlike such a device, the proposed generator resists against the man-in-the-middle attack by a novel challenge-response scheme, provides better accessability and protection against stolen devices. As the currently used devices do, it prevents any unauthorized transfer even if the victim's all other credentials are revealed through his PC infected with spyware such as a keyboard logger.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.181-185
• /
• 2006

A liquid rocket fuel-rich gas generator developed for the first time in the country can produce combustion gas over the rate of 4 kg/s at 900 K and 58 bar. The gas can be used not only for driving a turbopump but also for providing heat source for propellant supply tanks. The final design of the gas generator has been fixed based on the concept and preliminary development tests, and was validated through structure and heat transfer analysis. The manufacturing involves precision machining, special surface finish, and welding techniques. The final assessment on the characteristics of ignition and combustion had been carried out through five combustion tests. This concluded that the present product satisfies the development requirements.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.5
• /
• pp.91-97
• /
• 2015

After-burner test facility for gas generators of 75 tonf class liquid rocket engines was designed, which was verified by the facility certification test of the Combustion Chamber Test Facility(CCTF). The purpose of the certification test of the after-burner test facility is to verify the combustion stability of gas torches equipped in the gas generator and the after-burner test facility by using methane and oxygen gases. In the case of the autonomous test, the supply system provided steadily methane and oxygen gases to the after-burner system without pressure drop. The combustion pressure of the gas torch approached the design requirement. In the case of the coupled test, the gas generator ignition and the fuel-rich exhaust gas combustion were successfully carried out, leading to the verification of the test facility.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.3
• /
• pp.33-41
• /
• 2012

As the wind farms in large scale demand enormous amount of construction cost, minimizing the economic burden is essential and also it is very important to measure the wind resources and forecast annual energy production correctly to judge the economic feasibility of the proposed site by way of installing a Met mast at or nearby the site. Wind resources were measured by installing a 80[m] high Met mast at WangdeungYeo Island to conduct the research incorporated in this paper and offshore wind farm was designed using WindPRO. Wind farm of 100[MW] was designed making use of 3 and 4.5[MW] wind generator at the place selected to compare their annual energy production and capacity factor applying the loss factor of 10[%] and 20[%] respectively to each farm. As a result, 336,599[MWh] was generated by applying 3[MW] wind generator while 358,565 [MWh] was produced by 4.5[MW] wind generator. Difference in the energy production by 3[MW] generator was 33,660 [MWh] according to the loss factor with the difference in its capacity factor by 3.8[%]. On the other hand, 23 units of 4.5 [MW] wind generators showed the difference of annual energy production by 35,857 [MWh] with 4.0[%] capacity factor difference.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.865-871
• /
• 2016

This work presents a radar signal interferer to be used for evaluating the mutual interference among automotive radars. The developed interfering signal generator is composed of a reference signal generator and a 77 GHz transmitter. Reference signal generator is made up of commercial chips and board, it can generate various modulated signal such as triangular wave, sawtooth wave and random frequency hopping. The transmitter generates 77 GHz band signal by multiplying modulated reference signal frequency 28 times. Transmitter was fabricated using 65 nm CMOS process, it can operate horn antenna by built in on-chip waveguide feeder. The transmitter exhibited 7.31~8.06 dBm output power over a frequency lock range of 75.6~77 GHz.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.7
• /
• pp.831-836
• /
• 2002

There are various information resources on the Internet and people are taking more interest in XML day by day. In XML, the structure of information can be freely defined so that the standardization of documents can be hardly made. If DTD, which is applied to an XML Document representing specific information, is including concept information, it can be freely applied to the structure of document and also contributes to the convenience in information retrieval. In this study, we developed universal DTD Generator in order to automatically generate DTD including concept information. For the generation of universal DTD, the conceptualization of information is required; to conceptualize information, the hierarchical structuring and propertizing are required. The hierarchical structuring represents the inclusive relation of routine concepts for representing information in hierarchical structure, and the propertizing represents the property and mutual relation that the each concept represented in hierarchical structure can have. The defined hierarchical structure and propertization come to generate the universal DTD Generator. The universal DTD generated by DTD Generator can be applied to all the XML Documents representing the same information in different structure. However, the most ideal way is that the information of universal DTD, which can be applied to various documents, is including all the cases. Therefore, the study for designing correct concept information is necessary.