• 한국디지털건축인테리어학회논문집
• /
• 제9권3호
• /
• pp.15-23
• /
• 2009

Chaos theory, qualitative study of unstable aperiodic behavior in deterministic nonlinear dynamical systems, is dominant paradigm in the twenty first century. Fractal geometry, as an expressed form of chaos, now influences many areas such as architecture, art, music, economics, literature, etc. The purpose of this study is to analyze fractal geometry and fractal formative elements in architectural design. There are scaling, superimposition, distortion, deformation and repetition in the fractal form generator that can be applied to design concept and process in architecture. This study shows fractal geometry can be the architectural form creation method. Fractal geometry similar to nature's patterned order can be provided endless possibilities for design analysis and methodology in architecture. Therefore the further study of fractal geometry should progress synthetically through the basis of the study.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.498-501
• /
• 1998

This paper deals with the design and evaluation of the robust controller for a synchronous generator excitation system to improve the steady state and transient stability. The nonlinear characteristics of the system is treated as model uncertainties, and then the robust control techniques are introduced into the power system stability design to take into account these uncertainties at the controller design stage. The performance of the designed controller is examined by extensive non-linear time domain simulation. It is shown that the performance of the robust controller is superior to that of the conventional PI controller.

• 조명전기설비학회논문지
• /
• 제14권5호
• /
• pp.62-65
• /
• 2000

본 논문은 동기 발전기 시스템의 정상상태와 과도상태 안정도를 개선하기 위해서 강인제어기를 설계하고 증명하였다. 시스템의 비선형특생은 모델 불확설성으로 다루었고, 강인제어 기법은 제어기 설계에서 이 불확실성을 고려하여 전력시스템의 안정도 설계에 적용하였다. 다자인된 제어기의 특성은 비전형사감영역 시뮬레이션오로 확대하여 검토하였다. 강인제어기의 특성이 고전적인 PI 제어기보다 약20%정도 우수함을 보였다.

• 디지털산업정보학회논문지
• /
• 제7권2호
• /
• pp.29-37
• /
• 2011

Java bytecode verification is a critical process to guarantee the safety of transmitted Java applet on the web or contemporary embedded devices. We propose a design of framework which enables to analyze and verify java bytecode. The designed framework translates from a java bytecode into the intermediate representation which can specify a properties of program without using an operand stack. Using the framework is able to produce automatically error specifications that could be occurred in a program and express specifications annotated in intermediate representation by a user. Furthermore we design a verification condition generator which converts from an intermediate representation to a verification condition, a verification engine which verifies verification conditions from verification condition generator, and a result reporter which displays results of verification.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.272-274
• /
• 1998

This paper treated the design and performance test of high speed motor/generator used in the flywheel energy storage system. The unique characteristics of the motor in this paper is the it doesn't contain any magnetic material. The field system was constructed by using Halbach array that generates the magnetic field with the permanent magnet only. The armature was also composed of plastic bobbin and winding. This paper shows the design results have a good agreement with the experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.167-170
• /
• 1993

This paper deals with AVR(Automatic Voltage Regulator) control1or design of synchronous generator adapting AC indirect excitation system. The simulation results are presented in frequency and tine domain for two plants(A and B). Try and error method for compensator design is used.

• 센서학회지
• /
• 제20권2호
• /
• pp.102-106
• /
• 2011

This paper presents a design and analysis of an electromagnetic micro generator which can convert low frequency vibration energy to electrical power. The design aspects of the micro generator comprised planar spring, Cu coil and a permanent magnet(NdFeB). Threetype spring designs and four materials(Parylene, FR-4, Cu and Si) were compared to find resonance frequency. It was found that the resonance frequency will be changed according to the spring shape and material. Mechanical and magnetic parameters had been adjusted to optimize the output power through a comprehensive theoretical study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1002-1004
• /
• 2005

This paper describes the performance analysis and design of single-phase self-excited induction generators. In this study, it is proposed to design the proper capacitance for self-excitation and voltage regulation, also. This methods are based on the induced MMF equations between main and the auxiliary winding. For the least influence between the two capacitors, the self-excited capacitor is selected under no load condition, while the series capacitor is designed under loaded condition. For the steady state analysis, the equivalent circuit of single-phase induction generators is used as circuit modeling using the double-revolving field theory. The validity of proposal methods and designed generator system will be confirmed by experimental and computed results.

• Nuclear Engineering and Technology
• /
• 제29권1호
• /
• pp.85-91
• /
• 1997

Cross-flow existing in a shell-and-tube steam generator can cause a tube to vibrate. There are four regions subjected to cross-flow in Yonggwang units 3 and 4 (YGN 3 and 4) steam generators, which are of the same design as the steam generators for Palo Verde nuclear power plant Palo Verde units 1 and 2 steam generators have experienced localized oar at the comers of the cold side recirculating fluid inlet regions. A number of design modifications were made to preclude tube failure in specific regions of YGN 3 and 4 steam generators. Therefore, flow induced vibration experiments were done to determine the vibration magnitude of tubes in the economizer tube free lane region. The objective of this experiment is to demonstrate that the tube displacement is less than 0.01 inch rms at 100% of full power flow and to quantify the remaining design margin at 120ft and 140% of full power flow.

• 한국기계가공학회지
• /
• 제18권10호
• /
• pp.110-115
• /
• 2019

Stationary and rotating blades can be found in a steam turbine generator and the airfoil shapes of these blades can be defined by point data from an aerodynamic design system. The main design process of blades is composed of two steps: first, the blade surface is modeled with the point data; and then, the section data is generated which contains composite curves with line segments and arcs for CAE of the blade. The surface is modeled by a curve-net defined by the point data, which may be extended to obtain the section data to model the blade. This paper presents methods for automating the above-mentioned steps, which have been implemented in the commercial CAD/CAM system, Unigraphics, with API functions written in C-language. Finally, the proposed methods have been applied to model the blade of a steam turbine generator.