• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.912-913
• /
• 2008

In this paper, peak detector of generator output voltage and variable gain controller is introduced for the fast dynamic response. The general r.m.s. detecting signal of generator has inherent time delay from the actual signal. So the dynamic response of generator using conventional PID controller has some problem in sudden load change. In order to overcome this problem, the peak detector and signal selector with variable gain controller is used in this paper. The proposed control scheme is verified from experimental test of 200kW diesel engine-generator.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.494-499
• /
• 2011

One of the devices to prevent separated flow over a wing or a flap at high angle of attack is a vortex generator. In the present work, we numerically study the flow around a low-profile or micro vortex generator whose height is less than local boundary layer thickness which can delay separation with a minimum drag penalty owing to its very small wetted surface area. As a first step toward a parametric study to efficiently design this MVG flow control system, we simulate the flow around a single MVG on a flat plate. For the simulation, we employ OpenFOAM with Launder-Sharma ${\kappa}$-epsilon model. The analysis results are validated by comparing with experimental results of a rectangular MVG at an angle of attack of 10 degrees whose height is 20% of local boundary layer. Important results and aspects of this numerical study are discussed. We also simulate the flow around rectangular, triangular and trapezoidal MVGs and the results are compared

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.1015-1018
• /
• 2003

과거 우리는 플랫폼 독립적인 XML과 GUI 기반의 툴들을 제공하여 장비에 대한 제어 및 모니터링 소프트웨어의 효율적인 생성과 유지보수성을 향상하기 위한 프레임워크[1][2]를 제안하였다. 제안한 프레임워크는 세 가지의 XML 문서(IID, MAP, CMIHL), VI Wizard, Generator로 구성되었다. 본 논문에서는 제안한 프레임워크의 한 구성요소인 Generator에 대한 설계와 구현을 보인다. Generator는 장비의 제어정보 모니터링 정보, 통신 정보, 스케줄 정보, 제어 소프트웨어의 사용자 인터페이스 정보 등을 기술하는 CMIML(Control & Monitor ing Instrument Markup Language) 문서를 이용해서 GUI 기반의 사용자 인터페이스 편집 환경을 제공하고, CMIML 문서를 소프트웨어 코드로 변환함으로써 제어 및 모니터링 소프트웨어를 자동 생성한다.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.12
• /
• pp.91-99
• /
• 1994

This paper proposes the Korean generator which is used in a Japanese to Korean translation system. The established Korean generator for japanese to Korean translation uses the entire sentence structure to generate Korean, or directly translates each morpheme. But in this paper, the generator generates Korean, based on a short clause. Japanese and Korean have similarities in short clauses, including the word order. But in the Korean generation, they also have many differences within short clauses. The analysed features in Japanese and Korean are in the wrong order. Therefore the Korean generator which takes it into consideration is needed. We propose a annotational algorithm for the Korean generation and apply it to the translation of postpositions, declinable words and auxiliary verbs. We also consider Korean phonological phenomenon that can't be extracted from the analyed Japanese informations. In the end, we can translate the Japanese conjugation that can't be easily dealt in the procedural method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.4
• /
• pp.49-55
• /
• 2014

In this paper, we propose the cogging toque reduction technique of the dual stator radial flux permanent magnet generator. The cogging toque is caused by the torque ripple increase and vibration and noise of the generator. And it is important factor determining cut-in speed of the small wind generator. To reduce cogging torque, permanent magnet displacement was studied. And the theory of the permanent magnet displacement was formulated and the cogging torque reduction according to the permanent magnet displacement was confirmed through the finite element method.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.507-510
• /
• 2005

High voltage pulse power supply using Marx generator and solid-state switches is proposed in this study. The Marx generator is composed of 12 stages and each stage is made of IGBT stack, two diode stacks, and capacitor. To charge the capacitors of each stage in parallel, inductive charging method is used and this method results in high efficiency and high repetition rates. It can generate the pulse voltage with the following parameters: Voltage: up to 120kv Rising time: sub ${\mu}S$ Pulse width: up to $10{\mu}S$, Pulse repetition rate: 1000pps The proposed pulsed power generator uses IGBT stack with a simple driver and has modular design. So this system structure gives compactness and easiness to implement total system. Some experimental results are included to verify the system performances in this paper.

• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.851-856
• /
• 2003

The LM generator is an improved summation generator with maximum period, near maximum linear complexity and maximum order of correlation immunity, and it has a property with the input-output correlation immunity In this paper, we propose the high-speed m-parallel LM-BSG and 8-parallel LM-BSG for detail as a design example. When compared with a conventional stream cipher, the properties of the proposed cipher exhibited the same crypto-degree (security) with a rt times faster processing.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.485-490
• /
• 2004

Flywheel Energy Storage System(FESS) consists of a high speed flywheel with an integral motor/generator suspended on non contact bearings and in an evacuated housing. Permanent magnet machines as the FESS motor/generator are a popular choice, since there are no excitation losses which means substantial increase in the efficiency. In this paper, the structural design method of rotor retainer for a high speed motor/generator are presented.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.3
• /
• pp.52-59
• /
• 2001

In this study, a technique has been developed to analyze the performance of the launching system using a gas generator of solid propellant. The physical model which described the thermodynamic behaviors of all launching devices from gas generator to canister and the dynamic behavior of missile was established, applying the empirical coefficients in the heat loss model. The processes of combustion, flow, and heat transfer inside the chamber of gas generator and the launching system were simulated by numerical method. The theoretical analysis guided the optimal design of gas generator and system, which made the launching system satisfy the requirements of good performance and high reliability.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.8
• /
• pp.391-399
• /
• 1999

We have designed the backward wave oscillator, a power-pulsed generator oscillated at 20 GHz has higher frequency than current one. An absolute instability linear analysis was used for the purpose of designing the slow wave structure. A large diameter (D/$\lambda$=4.8) of the slow wave structure was adopted to prevent the breakdown brought about by the increase of power density. We have fabricated a marx generator, pulse forming line and diode. And the development of a compact pulsed power generator with short period and low amplitude is expected.