• Korean Institute of Interior Design Journal
• /
• v.23 no.4
• /
• pp.32-41
• /
• 2014

The purpose of this study is providing a systematic method of exterior, interior finish materials and color scheme for elementary school and the actual color plans of elementary schools in Busan was analyzed to support the study. As a powerful design tool, a finish materials and a color are very effective to alter the perception of a building and a view. Most of the school, a shape and a material of elevations are monotonous and uniform and it makes students are hard to attach to their schools. As a place for learning and school life, the inner space of elementary classroom needs to be considered very important. The new basic guideline for developing and planning of architectural design could be achieved by researching a current plan and a finish material in elementary school. As a result, this study will benefit in planning both the exterior and interior environments of color.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1990.10a
• /
• pp.29-34
• /
• 1990

Based on the recent developments of the reliability-based structural analysis and design as well as the extending knowledge on the probabilistic characteristics of loadings and resistances, the probability based design criteria have been successfully developed for many standards. Since the probabilistic characteristics depend highly on the local environments(loadings) and workmanship resistances), it is recognized to develop the design creterion compatible with domestic requirements. In this study, therefore, the proper probability based design criterion(load and resistance factor design formats) has been developed based on the safaty levels observed from calibration with existing standards, which applies to the ultimate limit states of reinforced concrete members.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.6
• /
• pp.779-788
• /
• 2013

The load requirements should be known to design mechanical structure. This paper proposes a generation method of load requirements using U.S. military specification to design the external mounting structure of the helicopters of which the flight environments such as aerodynamic forces and inertia forces are unknown. In this study, the load requirements which were applied at the design of the pod structure for helicopter captive flight test could be computed by using this method. The validation of proposed method was confirmed from the test flight using developed pod system.

• ETRI Journal
• /
• v.44 no.5
• /
• pp.837-848
• /
• 2022

Analog circuit design is comparatively more complex than its digital counterpart due to its nonlinearity and low level of abstraction. This study proposes a novel low-level hybrid of the sine-cosine algorithm (SCA) and modified grey-wolf optimization (mGWO) algorithm for machine learning-based design automation of CMOS analog circuits using an all-CMOS voltage reference circuit in 40-nm standard process. The optimization algorithm's efficiency is further tested using classical functions, showing that it outperforms other competing algorithms. The objective of the optimization is to minimize the variation and power usage, while satisfying all the design limitations. Through the interchange of scripts for information exchange between two environments, the SCA-mGWO algorithm is implemented and simultaneously simulated. The results show the robustness of analog circuit design generated using the SCA-mGWO algorithm, over various corners, resulting in a percentage variation of 0.85%. Monte Carlo analysis is also performed on the presented analog circuit for output voltage and percentage variation resulting in significantly low mean and standard deviation.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.656-657
• /
• 2015

Recently, Multi-Objective Optimization of design elements is an important issue in building design. Design variables that considering the specificities of the different environments should use the appropriate algorithm on optimization process. The purpose of this study is to compare and analyze the optimal solution using three evolutionary algorithms and energy modeling simulation. This paper consists of three steps: i)Developing three evolutionary algorithm model for optimization of design elements ; ii) Conducting Multi-Objective Optimization based on the developed model ; iii) Conducting comparative analysis of the optimal solution from each of the algorithms. Including Non-dominated Sorted Genetic Algorithm (NSGA-II), Multi-Objective Particle Swarm Optimization (MOPSO) and Random Search were used for optimization. Each algorithm showed similar range of result data. However, the execution speed of the optimization using the algorithm was shown a difference. NSGA-II showed the fastest execution speed. Moreover, the most optimal solution distribution is derived from NSGA-II.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.4
• /
• pp.18-29
• /
• 2015

The purposes of this research and development are as follows: first, to provide pleasant driving environments inside tunnels; second, to improve the current illumination environments lacking in diffusion luminance meters to meet tunnel lighting standards; and, third, to reduce the consumption of tunnel lighting energy accounting for approximately 65% of tunnel maintenance costs because of inadequate visual environments and tunnel operations. Further details are listed below. Firstly, an image luminance meter for tunnels that can implement the L20-method which is a tunnel luminance method that follows the international standards of CIE88, which was developed in order to improve and change the existing illumination-based tunnel lighting operation system to a luminance-based system. (The margin of error of below 5% according to the results of a test by an authorized agency and field test). Secondly, early illumination control is possible since the lighting control system that can be operated based on luminance enables interlocking control of the inside and outside of a tunnel using ethernet communication. Thirdly, guidelines for field application of the system are proposed. In addition, the luminance inducers of tunnels are found and the reflexibility of each facility that may reduce luminance of the boundaries is also proposed. Fourthly, as a result of a test bed, power consumption of luminance-based lighting operations decreased by 15.6% compared to illumination-based operations. Applying the feedback controls and maintenance factors of internal/external luminance meters, it reduced by 36.4%. Therefore, we became able to provide a luminance-based lighting operation system that complies with tunnel lighting design standards and provides a visual environment for drivers.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.147-153
• /
• 2016

Recently, IETF (Internet Engineering Task) working group has adopted CoAP (Constrained Application Protocol) as a standard IoT proctocol. CoAP is a specialized web transfer protocol for use with constrained nodes and constrained environment such as small memory and low power networks. In this paper, we design and implement a registration service with CoAP protocol based on RD(Resource Directory) to connect IoT nodes in mobile Internet environments. The resource directory between the mobile terminal and IoT nodes provides to discover the IoT nodes and get the context data. The mobile terminal has as the CoAP client and embedded IoT nodes includes as the CoAP server so that it can conveniently manage the constrained IoT nodes to get the context data and control devices in a mobile environments.

• Journal of Korea Multimedia Society
• /
• v.9 no.10
• /
• pp.1361-1370
• /
• 2006

Recently fast innovation of Internet technology causes lot of application to change into web application and requirement for the inter-operable communication among various systems are increased rapidly. These trends are part of changes which is caused by ubiquitous world and it is just beginning of huge waves that is required to fit and change under the ubiquitous environments. This thesis is focused on the Design and Implementation of Layer Structured Components which can be interfaced effectively for the Material Management System under the Heterogeneous Client Server Environments. The key points to do that kinds of affairs are using XML web services that can communicate thru systems and also using independent layered components for the enforcement of reusability and inter-operability. For the various type of testing of implementation, we used RFID System, PDA, Desktop Systems and confirmed the normal operation without concerning the type of client system and platforms. The Components proposed in this thesis could be reused effectively in case of developing similar applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1B
• /
• pp.26-38
• /
• 2006

To construct seamless collaborative environments, what all participants intent should be delivered, and visual elements such gesture, facial expression, and ambiance should be shared with all participants. In this paper, we propose high-quality video service to support DV(digital video) and HDV(high-definition DV) based on Access Grid(AG) which is a prevalent collaborative system. The proposed service is designed for employing versatile media tools and codecs with SDP(session description protocol) and SAP(session announcement protocol). We also design network-adaptive video transmission module to mitigate the impact of network fluctuation. This periodically monitors multicast performance and controls frame rate on sender side considering network condition. The experimental results over the test bed show that proposed service enhances quality of AG video service and provides seamless high-quality video transport by mitigating the impact of network fluctuation.

• International Journal of High-Rise Buildings
• /
• v.9 no.1
• /
• pp.71-79
• /
• 2020

As the workplace evolves in our vertical cities, the need for "think spaces" and the public realm to meet, create and innovate will become integral to tall buildings. These people places are designed to address the social challenges and enhance the co-working environments which are emerging in the dense urban context of our future cities. The design of sky terraces and the "spaces between" offer a greener, more humane and smarter work environment for the future. The public realm should no longer be held down, fixed to the ground plane, but rather become part and parcel of the upper levels of our workplace centers. These collective spaces in our workplace centers must provide a three dimensional matrix of connected and identifiable platforms to leverage the open and progressive future way of working. This will enable social networking and idea sharing, and create multi-dimensional, multi-level business incubators for innovation and creativity. The BCO ( British Council of Offices) has performed a landmark Wellness Matters Report which provides an exemplary roadmap for the future of the workplace. Our future vertical cities must also provide for serendipity in the workplace; a key attribute to drive the information exchange and collaboration that are proven to provide positive and progressive business outcomes. In addition to demonstrating examples of existing built work and the concept of the integrated vertical public realm, the presentation also will consider and define wellness in the workplace as a critical factor in our design strategies and our future workplace environments Hanging Gardens, Roof Terraces and the Vertical Plazas; designed for interchange, wellness, animation and collaboration.