• Computers and Concrete
• /
• v.26 no.3
• /
• pp.203-211
• /
• 2020

Turkey is located in one of the most seismically active regions of in Europe. The majority of the population living in big cities are at high seismic risk due to insufficient structural resistance of the existing buildings. Such a seismic risk brings the need for a comprehensive seismic evaluation based on the risk analysis in Turkey. Determining the seismic resistance level of existing building stock against the earthquakes is the first step to reduce the damages in a possible earthquake. Recently in January 2020, the Elazig earthquake brought the importance of the issue again in the public. However, the excessive amount of building stock, labor, and resource problems made the implementation phase almost impossible and revealed the necessity to carry out alternative studies on this issue. This study aims for a detailed investigation of residential buildings in Antalya, Turkey. The approach proposed here can be considered an improved state of building survey methods previously identified in Turkey's Design Code. Antalya, Turkey's fifth most populous city, with a population over 2.5 Million, was investigated as divided into sub-regions to understand the vulnerability, and a threshold value found for the study area. In this study, 26,610 reinforced concrete buildings between 1 to 7 stories in Antalya were examined by using the rapid visual assessment method. A specific threshold value for the city of Antalya was determined with the second level examination and statistical methods carried out in the determined sub-region. With the micro zonation process, regions below the threshold value are defined as the priority areas that need to be examined in detail. The developed methodology can be easily calibrated for application in other cities and can be used to determine new threshold values for those cities.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.3
• /
• pp.238-243
• /
• 2008

Several experimental techniques for identifying the noise sources distributed over a moving vehicle have been developed recently and are used to design a low noise vehicle. The beamforming method, which uses phase information between several microphones to localize the source position, is proved to be one of the promising techniques applicable even under complicated test environments. In this study a beamforming algorithm is developed and applied to measure the dominant noise sources on a passenger car passing by. Unlike the acoustic signals from a stationary noise source, the sound generated from a moving source is distorted due to the Doppler effects. The information about the speed and relative position of the vehicle are used to eliminate the Doppler effects from the measured acoustic signal by using a de-Dopplerization algorithm. The noise generated from a moving vehicle can be grouped in many ways, however, tire noise and the noise generated from the engine are distinguishable at the speeds being tested.

• Journal of Distribution Science
• /
• v.17 no.7
• /
• pp.65-76
• /
• 2019

Purpose - The purpose of this study is to investigate economical ventilation effectiveness to reduce hazardous materials exposure and damage of workers by analyzing exposure amount of noxious substances under various ventilation conditions of nail salon for indoor environments. Research design, data, and methodology - This study was carried out with cooperation of Nail shop located in SeongNam city to involve an analysis of the environmental impact indoor air quality, pollutant exposure and economical cost-effectiveness in the nail workplace. The hazardous substances were PM-10(Particulate Matter-10㎛), VOCs(Volatile Organic Compounds) and Formaldehyde, which are the major materials of nail workplace. Results - PM-10 is reduced by about 60% with air cleaner, forced artificial ventilation by 32%, and natural ventilation by about 12%. TVOCs and Formaldehyde showed similar efficiency (80~100%) after natural ventilation and ventilation after 60 minutes. The removal efficiencies of VOCs and formaldehyde were similar to those of natural ventilation and mechanical ventilation system. However, in case of dust, natural ventilation was reduced by artificial ventilation system due to inflow of external dust during natural ventilation. Conclusions - If the pollution degree of outdoor air is not high, air volume is high, and natural ventilation is performed when the air conditioning and heating system is not operated. Even at the end of the work, it keeps operating for 60 minutes to remove the pollutants generated. Results of this analysis demonstrated that the worker environment can be improved by adopting institutional legislation and guidelines for ventilation.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.11
• /
• pp.39-53
• /
• 2020

Purpose: With a rapid advance of communication technology, distributional systems of sport contents continue to show improvements. In particular, a traditional framework in creating sport cartoon has been influenced by the environment of the communication industry. Despite the development of distributional systems, the current sport cartoon industry still lacks in advancement. To this day, various research about sport contents have been conducted; yet, not many studies of the interaction between sport cartoons and communication technology have been done. In this respect, this study is to review the distributional environment of the sport cartoon industry and provide distributional strategies for developing sport cartoon industry. Research design, data, and methodology: In addition to in-depth interviews with five practitioners in sport cartoon industry, the study employed case study methodology. Interview data were analyzed by qualitative content analysis. Results: With new environments allowing anyone allowing to create and share webtoons, various genres including sports webtoons appear, and this became amotive to the growth of sports webtoons. Today, sports comics acted as a sports advertisement platform which not only created additional profit but also became an opportunity as a marketing method. On the contrary, the formal attributes of webtoons cause hardship in consistently creating sports webtoons. Hence, it is needed that supporting policies need to be established to nurture sport webtoon expertise. For example, Korea Creative Content Agency allows future webtoon authors to have an opportunity to be educated and equipped in producing creative sport webtoon contents. Moreover, revenue systems should be developed for motivating webtoon authors to involve in sport contents in their works. Conclusions: In order to promote the sports cartoon industry based on the findings, it is first necessary to create sports comics that reflect the formal characteristics of webtoons and the changing consumer environment. Second, it is important to acknowledge the industrial value of sports comics and it is necessary to promote policies regarding sports webtoon production and distribution from a national level. Third, by diversifying profits through OSMU and sports advertisements, it is possible to enhance the work environment and the treatment of authors. Implications and future directions were discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.24-35
• /
• 2018

In wireless communications environments, a link adaptation technique that selects the proper rate from among several transmission rates is adopted to cope with variations in channel status. In block coded modulation, the frame time and/or the block length can be adjusted to the channel status. A smaller frame time can cause inter-frame interference (IFI), however, a larger frame time can reduce the data rate. Therefore, frame time is the design factor decided by a tradeoff between performance and the data rate. This paper presents a method to determine the frame time based on the processing gain for the channel model, CM1~CM4, recommended by IEEE 802.15a. Also, a link adaptation technique for block coded modulation is proposed for efficient communications by varying the frame time and the block length. Through simulation, link adaptation can be carried out with a step size of 2~5 nsec in a frame time range of 14~ 50 nsec for channel models CM1~CM4.

• Earthquakes and Structures
• /
• v.6 no.1
• /
• pp.71-87
• /
• 2014

Interaction between closely-spaced buildings subject to earthquake induced strong ground motions, termed in the literature as "seismic pounding", occurs commonly during major seismic events in contemporary congested urban environments. Seismic pounding is not taken into account by current codes of practice and is rarely considered in practice at the design stage of new buildings constructed "in contact" with existing ones. Thus far, limited research work has been devoted to quantify the influence of slab-to-slab pounding on the inelastic seismic demands at critical locations of structural members in adjacent structures that are not aligned in series. In this respect, this paper considers a typical case study of a "new" reinforced concrete (R/C) EC8-compliant, torsionally sensitive, 7-story corner building constructed within a block, in bi-lateral contact with two existing R/C 5-story structures with same height floors. A non-linear local plasticity numerical model is developed and a series of non-linear time-history analyses is undertaken considering the corner building "in isolation" from the existing ones (no-pounding case), and in combination with the existing ones (pounding case). Numerical results are reported in terms of averages of ratios of peak inelastic rotation demands at all structural elements (beams, columns, shear walls) at each storey. It is shown that seismic pounding reduces on average the inelastic demands of the structural members at the lower floors of the 7-story building. However, the discrepancy in structural response of the entire block due to torsion-induced, bi-directionally seismic pounding is substantial as a result of the complex nonlinear dynamics of the coupled building block system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.894-899
• /
• 2007

An experiment was conducted using a [6, 6-$^2H$]glucose isotope dilution method to determine the effects of plantain (Plantago lanceolata L.) on plasma glucose metabolism in sheep taken from a thermoneutral environment and exposed to a hot environment. The sheep were fed either mixed hay (MH) of orchardgrass (Dactylis glomerata L.) and reed canarygrass (Phalaris arundinacea L.) at a 60:40 ratio or MH and plantain (PL) at a 9:1 ratio in a crossover design for each 23-day period. In both dietary treatments the metabolizable energy (ME) and crude protein intake were designed to be isoenergetic and isoproteinous at around maintenance level. The sheep were taken from a thermoneutral environment ($20^{\circ}C$, 70% RH) and exposed to a hot environment ($28-30^{\circ}C$, 70% RH) for 5 days. The isotope dilution method using a single injection of [6, 6-$^2H$]glucose was performed on the $18^{th}$ day of the thermoneutral environment and on the $5^{th}$ day of heat exposure. Plasma glucose pool size was numerically lower (p = 0.26) during heat exposure on both dietary treatments, and numerically higher (p = 0.13) on the MH diet irrespective of environmental temperature. Plasma NEFA concentration (p = 0.01) and glucose turnover rate (p = 0.03) were decreased during heat exposure, but remained similar between diets. It could be concluded that, although no positive impact of plantain on glucose metabolism was found under the present experimental conditions (plantain constituted only 10% of basal diet), plantain herb is an alternative to MH for rearing sheep in both thermoneutral and hot environments.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.37-46
• /
• 2001

This paper proposes a new noise suppression method using the Wavelet transform analysis. The noise suppressor using the Wavelet transform shows the more effective advantages in a babble noise than one using the short-time Fourier transform. We designed a new channel structure based on spectral subtraction of Wavelet transform coefficients and used the Wavelet mask pattern with more higher time resolution in high frequency. It showed a good adaptation capability for babble noise with a non-stationary property. To evaluate the performance of proposed noise canceller, the informal subjective listening tests (Mos tests) were performed in background noise environments (car noise, street noise, babble noise) of mobile communication. The proposed noise suppression algorithm showed about MOS 0.2 performance improvements than the suppression algorithm of EVRC in informal listening tests. The noise reduction by the proposed method was shown in spectrogram of speech signal.

• KIISE Transactions on Computing Practices
• /
• v.24 no.3
• /
• pp.129-137
• /
• 2018

NVMe(Non-Volatile Memory Express) SSD(Solid State Drive) is a high-performance storage that makes use of flash memory as a storage cell, PCIe as an interface and NVMe as a protocol on the interface. It supports multiple I/O queues which makes it feasible to process parallel-I/Os on multi-core environments and to provide higher bandwidth than SATA SSDs. Hence, NVMe SSD is considered as a next generation-storage for data-center and cloud computing system. However, in the virtualization system, the performance of NVMe SSD is not fully utilized due to the bottleneck of the software I/O stack. Especially, when it uses I/O stack of the hypervisor or the host operating system like Xen and KVM, I/O performance degrades seriously due to doubled-I/O stack between host and virtual machine. In this paper, we propose a new I/O engine, called Direct-AIO (Direct-Asynchronous I/O) engine, that can access NVMe SSD directly for I/O performance improvements on QEMU emulator. We develop our proposed I/O engine and analyze I/O performance differences between the existed I/O engine and Direct-AIO engine.

• The Journal of the Korea Contents Association
• /
• v.9 no.10
• /
• pp.22-31
• /
• 2009

Although the amount of UCC(user created content) rapidly grows nowadays, there are various problems in authoring, distribution and management of this abundant content because the platforms for fabrication and replaying content are not compatible and the authoring environments are not sufficiently interoperable with other site or with each other. In this paper, we propose a CPMS(content publication and management system) scheme improved in interoperability to solve these problems, and we design a novel system enhancing the efficiency and speed of content distribution and management by minimizing the repetitions in the processes of production, reshaping, and publication. Moreover the proposed system adopts an improved content management technology by changing from simple point-to-point method to the centralized distribution method, and as for the service scheme, we change from the site link method to the database link method, and we also take duplex interlink scheme instead of simplex one. We finally compare the proposed system to the conventional ones as points of view of compatibility and interoperability to prove the improved performance of our system.