• 한국항공우주학회지
• /
• 제33권4호
• /
• pp.1-6
• /
• 2005

적대적 환경에서 임무를 수행하는 비행체의 레이다 포착에 관련된 스텔스 기술이 주요 설계 문제로 부각되고 있다. 레이다 회피 기능을 증대시키는 방안들을 분석하기 위해서는 Maxwell 방정식을 해석하는 기법이 필요한데, 본 연구에서는 기본 수치기법으로 다학제 최적설계 연구에 적합한 CFD 기법을 이용하였다. 시간 영역 전자기장 데이터를 DFFT 알고리즘을 이용하여 주파수 영역으로 변환한 후, 근방-원방 변환에 기초한 Green 함수 관계식을 사용하여 RCS 특성을 예측하였다. 검증을 위해 완전전도 실린더 주위 TE 모드를 고려하였으며, CFD 기법을 원용한 CEM 코드의 가능성을 확인하기 위해 비행체 날개단면 주위의 전자기 산란 현상을 계산하였다.

• 한국지능시스템학회논문지
• /
• 제17권3호
• /
• pp.328-335
• /
• 2007

온톨로지는 공유된 개념과 그 개념들 사이의 관계로 표현된다. 이러한 온톨로지를 사용하여 인간과 시스템에 대한 지식의 공유에 관한 연구가 활발히 이루어져 왔다. 예를 들면, 온톨로지의 설계 및 구축에 의한 영상이해를 들 수 있다. 그러나 온톨로지에 기반한 영상이해 방식 중 대부분의 기존 방식은 개념적인 연구에 그칠 뿐 구체적인 방법을 제시하지는 못하였다. 본 논문에서는 온톨로지로 표현된 지식에 근거하여 영상을 이해하는 다음과 같은 영상이해 프로세스 및 시스템을 제안한다. i)특정 분야의 지식을 온톨로지로 표현하고, ii)영상 처리 및 분석 과정을 통해 영상을 구성하는 객체들의 특징을 추출하며, iii)객체의 특징으로부터 객체의 개념을 해석하고, iv)온톨로지 추론을 통해 영상 해석 과정에서의 애매성을 줄인다. 제안된 영상 이해 프로세스에 기반하여 영상이해 시스템을 구축하고, 특정 분야에서의 실험을 통하여 제안된 프로세스와 시스템의 효용성을 확인한다.

• Smart Structures and Systems
• /
• 제31권3호
• /
• pp.283-299
• /
• 2023

Structural stability of floating platforms has long since been a crucial issue in the field of marine engineering. Excessive motions would not only deteriorate the operating conditions but also seriously impact the safety, service life, and production efficiency. In recent decades, several control devices have been proposed to reduce unwanted motions, and an attractive one is the tuned heave plate (THP). However, the THP system may reduce or even lose its effectiveness when it is mistuned due to the shift of dominant wave frequency. In the present study, a novel adaptive tuned heave plate (ATHP) is proposed based on inerter by adjusting its inertance, which allows to overcome the limitation of the conventional THP and realize adaptations to the dominant wave frequencies in real time. Specifically, the analytical model of a representative semisubmersible platform (SSP) equipped with an ATHP is created, and the equations of motion are formulated accordingly. Two optimization strategies (i.e., J₁ and J₂ optimizations) are developed to determine the optimum design parameters of ATHP. The control effectiveness of the optimized ATHP is then examined in the frequency domain by comparing to those without control and controlled by the conventional THP. Moreover, parametric analyses are systematically performed to evaluate the influences of the pre-specified frequency ratio, damping ratio, heave plate sizes, peak periods and wave heights on the performance of ATHP. Furthermore, a Simulink model is also developed to examine the control performance of ATHP in the time domain. It is demonstrated that the proposed ATHP could adaptively adjust the optimum inertance-to-mass ratio by tracking the dominant wave frequencies in real time, and the proposed system shows better control performance than the conventional THP.

• Wind and Structures
• /
• 제23권6호
• /
• pp.559-575
• /
• 2016

In order to investigate the influence of different blade positions on aerodynamic load and wind loads and load-effects of large scale wind turbine tower under the halt state, we take a certain 3 MW large scale horizontal axis three-blade wind turbine as the example for analysis. First of all, numerical simulation was conducted for wind turbine flow field and aerodynamic characteristics under different halt states (8 calculating conditions in total) based on LES (large eddy simulation) method. The influence of different halt states on the average and fluctuating wind pressure coefficients of turbine tower surface, total lift force and resistance coefficient, circular flow and wake flow characteristics was compared and analysed. Then on this basis, the time-domain analysis of wind loads and load-effects was performed for the wind turbine tower structure under different halt states by making use of the finite element method. The main conclusions of this paper are as follows: The halt positions of wind blade could have a big impact on tower circular flow and aerodynamic distribution, in which Condition 5 is the most unfavourable while Condition 1 is the most beneficial condition. The wind loads and load-effects of disturbed region of tower is obviously affected by different halt positions of wind blades, especially the large fluctuating displacement mean square deviation at both windward and leeward sides, among which the maximum response occurs in $350^{\circ}$ to the tower top under Condition 8; the maximum bending moment of tower bottom occurs in $330^{\circ}$ under Condition 2. The extreme displacement of blade top all exceeds 2.5 m under Condition 5, and the maximum value of windward displacement response for the tip of Blade 3 under Condition 8 could reach 3.35 m. All these results indicate that the influence of halt positions of different blades should be taken into consideration carefully when making wind-resistance design for large scale wind turbine tower.

• 청정기술
• /
• 제27권1호
• /
• pp.61-68
• /
• 2021

선택적 촉매 혼합법은 대용량의 화력 발전시스템에서 질소산화물을 제거하는 방법으로 많이 사용되고 있다. 분사된 암모니아와 유입된 배기가스의 균일한 혼합은 촉매 층에서의 탈질 환원 과정에서 매우 중요하다. 본 연구에서는 탈질설비의 암모니아 분사시스템 설계과정에 전산해석 기법을 적용하였다. 적용 모델은 현재 가동되고 있는 800 MW급 석탄 화력 발전소의 탈질설비이다. 유동 해석 범위는 암모니아 분사 시스템 입구에서 촉매 층 후단부이다. 2차원 유동장을 선택하였고 비압축성으로 가정하였다. 상용 소프트웨어인 ANSYS-Fluent를 사용하여 정상 상태의 난류 유동을 해석하였다. 설계 변수로는 암모니아 분사 시스템에서의 노즐 배치 간극과 분사 유량으로 4가지 경우에 대해 결과를 분석하였다. 촉매 층 입구에서의 몰 비에 의한 평균제곱근오차 값을 최적화 변수로 선정하였고 실험계획법을 기반으로 한 최적화 알고리즘을 도입하였다. 노즐 피치와 유량을 동시에 조절한 경우가 유동 균일성 관점에서 가장 우수하였다.

• 한국전산구조공학회논문집
• /
• 제14권4호
• /
• pp.495-503
• /
• 2001

기능 경사 복합재에서는 열적 탄성 거동이 성분의 구성분포에 의해 명백하게 구분되어지도록 두가지의 성분입자들을 특정한 체적분율 분포에 따라서 혼합한다. 따라서, 설계자는 주어진 제약조건에 대해 목적하는 성능에 적합한 기능 경사 복합재를 설계하기 위해서 최적의 체적분율 분포를 결정해야만 한다. 본 연구에서는 금속과 세라믹으로 구성된 내열 기능 경사 복합재의 2차원 체적분율을 최적화하기 위하여 내부벌칙함수법과 유한차분법을 사용한 수치 최적화기법을 제안하였다. 최적화 효율을 위해 단일 설계변수의 유한개의 균질 사각형 격자로 기능 경사 복합재의 영역을 나누었다. 그렇지만, 연속적인 체적분율을 구현하기 위하여 최적설계 후에 전체적으로 연속적인 이차원 선형함수로써 불연속적인 체적분율을 보간하였다.

• Structural Engineering and Mechanics
• /
• 제48권4호
• /
• pp.455-466
• /
• 2013

In recent years, many countries have added railway noise to the issues covered by noise regulations. It is known that the rail is the dominant source of rolling noise at frequency range of 500Hz-2000Hz for the conventional speeds (<160km/h). One of the effective ways to reduce noise from railway track is using a rail vibration absorber. To study the acoustic performance of rail absorber, the decay rates of vibration have long been used by researcher. In this paper, A FE model of a periodic supported rail with infinite element in ABAQUS is developed to study the acoustic performance of the rail absorber. To compute the decay rates, acceleration responses along the rail transferred to MATLAB to obtain response levels in frequency domain and then by processing the response levels, the decay rates obtained for each1/3octav band. Continous rail absorber is represented by a steel layer and an elastomer layer. The decay rates for conventional rail and rail with one-side absorber and also, the rail with two side absorber are obtained and compared. Then, to improve the system of rail absorber, a steel plate with elastomer layer is added to bottom of the rail foot. The vertical decay rate results show that the decay rate of rail vibration along the track is significantly increased around the tuned frequency of the absorber and thus the rail vibration energy is substantially reduced in the corresponding frequency region and also effective in rail noise reduction.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.77-81
• /
• 2009

The radar cross section (RCS) of a warship is one of the most important design features in terms of her survivability in hostile environments. Ocean waves continuously changes the attitude of an objective warship to hostile radar and distorts the RCS as a result. This paper presents a dynamic RCS analysis technique and procedure that considers temporal ship motion. First, data sets are prepared for ship motions in 6 degrees of freedom, which are numerically simulated for an objective warship via frequency to time domain conversion with response amplitude operators and specified ocean wave spectra. Second, a series of RCS analysis models are transformed geometrically by referring to ship motion data sets. Finally, temporal RCS analyses are carried out with the RCS simulation code, SYSCOS. As an example, RCS analysis results are given for a virtual warship, which show that ship motions temporally change RCS values and cause RCS reduction compared with static value in terms of mean values.

• 시스템엔지니어링학술지
• /
• 제4권2호
• /
• pp.1-13
• /
• 2008

The development of hull curved plate forming automation system in ship production field begins from the need of stakeholders such as enterprise organization, who need the reduction of cost and time and improvement of productivity, and end users who work for this production process. Even though hull curved plate forming automation system has small scale, it is reasonable to consider the system as an interdisciplinary system, because the system includes all of hardware, software, human and information and has a specified objective to be performed. In this paper, introduction of 4 leading Model-Based Systems Engineering (MBSE)methodologies is described and SysML(Systems Modeling Language), which is designed to analyze, specify, design, and verify complex systems, is introduced in order to support those methodologies. Especially, SysML is applied to system modeling of hull curved plate forming automation system and focused on. The structure diagrams and behavior diagrams based on operational context of the automation system are used to make system architecture. The performed application of SysML to the hull curved plate forming automation system shows an example of applying SysML to the development of other autonomous systems in ship production domain.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.58-66
• /
• 2010

This study examines thermal safety on three-way catalyst that dominates 70 % among whole exhaust gas purification device in 2003. Three-way catalyst durability in the Korea requires 5 years/80,000 km in 1988 but require 10 years/120,000 km after 2002. Three-way catalyst durability in the USA requires 7 years/120,000 km but require 10 years/160,000 km after 2004. Three-way catalyst maintains high temperature in interior domain but maintains low temperature on outside surface. Therefore this device shows tensile stress on outside surface. Temperature distribution of three-way catalyst was acquired by thermal flow analysis for predicted thermal flow parameter. Thermal stress analysis for three-way catalysis was performed based on this temperature distribution. Thermal safety of three-way catalyst was estimated by power law dynamic fatigue life estimation and strength reduction methods for thermal stress.