• 대한전자공학회논문지TC
• /
• 제38권2호
• /
• pp.13-18
• /
• 2001

본 논문에서는 소형화된 구형 SIR(Stepped Impedance Resonators)을 이용하여 IMT-2000에 적용할 수 있는 중심주파수 1.95GHz에서 60MHz의 대역폭을 갖는 4-극 준-타원 함수 대역통과필터를 설계 및 제작하였다. 시뮬레이션은 NUFDTD(Nonuniform Finite Difference Time Domain)을 사용하여 3가지 기본 결합구조에 대한 결합계수를 구하였다. 소형화된 구형 SIR은 기존의 마이크로스트립 구형 개방 루프 공진기 필터 보다 50% 이상의 크기를 감소됨을 알 수 있었다. SIR을 대역통과필터에 적용시 제 3고조파 내에서의 스퓨리어스 응답 특성은 최대 19dB의 우수한 특성을 보였으며, 실험한 결과와 시뮬레이션 결과가 잘 일치하였다.

• 한국항해항만학회지
• /
• 제34권4호
• /
• pp.271-279
• /
• 2010

The Mobile Harbor(MH) is a new transportation platform that can load and unload containers to and from very large container ships in the sea. This loading and unloading by crane can be performed with only very small movements of the MH in waves because MH is operated outside of the harbor. For this reason, an anti-rolling tank(ART) and an active mass driving system(AMD) were designed to reduce MH's roll motion, especially at the natural frequency of MH. In the conceptual design stage, it is difficult to confirm the design result of theses anti-rolling devices without modeling and simulation tools. Therefore, the coupled MH and anti-rolling devices' dynamic equations in waves were derived and a simulation program that can analyze the roll reduction performance in various conditions, such as sea state, wave direction, and so on, was developed. The coupled equations are constructed as an eight degrees of freedom (DOF) motion that consists of MH's six DOF dynamics and the ART's and AMD's control variables. In order to conveniently include the ART's and AMD's control dynamics in the time domain, MH's radiated wave force was described by an impulse response function derived by the damping coefficient obtained in the frequency domain, and wave exciting forces such as Froude-Krylov force and diffraction force and nonlinear buoyancy were calculated at every simulation time interval. Finally, the roll reduction performances of the designed anti-rolling devices were successfully assessed in the various loading and wave conditions by using a developed simulation program.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.453-463
• /
• 2017

This paper discusses the measurement of frequency response functions for various dc-dc converters. The frequency domain identification procedure is applied to the measured frequency responses. The identified transfer functions are primarily used in developing behavioral models for dc-dc converters. Distributed power systems are based upon such converters in cascade, parallel and several other configurations. The system level analysis of a complete system becomes complex when the identified transfer functions are of high order. Therefore, a certain technique needs to be applied for order reduction of the identified transfer functions. During the process of order reduction, it has to be ensured that the system retains the dynamics of the full order system. The technique used here is based on the Hankel singular values of a system. A systematic procedure is given to retain the maximum energy states for the reduced order model. A dynamic analysis is performed for behavioral models based on full and reduced order frequency responses. The close agreement of results validates the effectiveness of the model order reduction. Stability is the key design objective for any system designer. Therefore, the measured frequency responses at the interface of the source and load are also used to predict stability of the system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.921-926
• /
• 2007

A dynamic system under random disturbance is considered in the study. In order to control the system efficiently, proper reduction of system dimension is indispensible in design stage. The reduction method using component cost analysis in conjunction with stochastic analysis is proposed for the control of a system. System response is obtained in terms of dynamic moment equation via Fokker-Plank-Kolmogorov(F-P-K) equation. The dynamic moment response of the system under random disturbance are reduced by using of deterministic version of component cost analysis. The reduced system via proposed "stochastic component cost analysis" is successfully implemented for dynamic response and shows remarkable control performance effectively utilizing "stochastic controller" in physical time domain.

• 한국건설관리학회논문집
• /
• 제14권1호
• /
• pp.144-152
• /
• 2013

Design is an iterative, generative, and multidisciplinary process by its nature. Iteration occurs often in most of the engineering design and development projects including construction. Design iterations cause rework, and extra efforts are required to get the optimal sequence and to manage the projects. Contrary to simple design, isolation of the generative iterations in complex design systems is very difficult, but reduction in overall iterations is possible. Design depends upon the information flow within domain and also among various design disciplines and organizations. Therefore, it is suggested that managers should be aware about the crucial iterations causing rework and optimal sequence as well. In this way, managers can handle design parameters related to such iterations pro-actively. There are a number of techniques to reduce iterations for various kinds of engineering designs. In this paper, parameter based Design Structure Matrix (DSM) is chosen. To create this DSM, a survey was performed and then partitioned using a model. This paper provides an easy approach to those companies involved in or intend to be involved in "design and build projects".

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.638-641
• /
• 2008

Design is an iterative, generative, and multidisciplinary process by its nature. Iteration is frequent in most of the engineering design and development projects including construction. Design iterations cause rework, and extra efforts are required to get the optimal sequence and to manage the projects. Contrary to simple design, isolation of the generative iterations in complex design systems is very difficult, but reduction in overall iterations is possible. Design depends upon the information flow within domain and also among various design disciplines and organizations. Therefore, it is suggested that managers should be aware about the crucial iterations causing rework and optimal sequence as well. In this way, managers can handle design parameters related to such iterations proactively. Numbers of techniques are available to reduce iterations for various kinds of engineering designs. In this paper, parameter based Design Structure Matrix (DSM) is chosen. To create this DSM, a survey was performed and then partitioned using a model. This paper provides an easy approach to those companies involved in or intend to be involved in "design and build projects."

• 한국산학기술학회논문지
• /
• 제10권9호
• /
• pp.2179-2182
• /
• 2009

최근, 광학기계시스템에 새로운 구조 모델은 저비용, 고성능 및 품질의 개념설계에서 출발해야 할 필요성이 있다. 이런 관점에서, 기계적 구조의 개념설계와 연관된 구조적-위상적 형상은 구조적 강성과 감량과 같은 시스템 성능에 큰 영향을 끼친다. 본 연구에서는, 최적설계방법이 대구경 구조물의 설계단계에 제시되었다. 먼저, 위상 최적화법을 이용하여 구조물의 최적 배열과 보강방안을 얻었고, 사이즈 최적화와 다분야 최적기법을 사용한 세부 설계를 수행하였다. 그 일례로, 이 방법들을 대구경 구조물 설계에 적용하였다.

• 대한전자공학회논문지TC
• /
• 제46권3호
• /
• pp.32-39
• /
• 2009

본 논문은 초광대역 임펄스를 이용한 지반탐사 영상레이더 시스템 (Ground Penetrating Image Radar; GPIR) 설계에서 수직심도의 해상도를 높이기 위한 시간영역 관점에서의 최적화 설계방법을 제시하였다. 시스템의 핵심 부분인 임펄스 발생원 및 초광대역 안테나에 대하여 시간영역에서의 해석 기법을 제시하였고, 시뮬레이션에 의해 최적 설계 파라미터를 설정하였다. 특히, 임펄스 신호의 파형을 정형화하여 임펄스 신호의 스펙트럼 효율을 높였으며, 초광대역 안테나로는 U자형 평판형 다이폴 안테나를 사용하였다. 제안된 안테나는 반사체를 사용하여 외부 잡음을 차단하였고, 지중과의 신호 결합을 개선하였다. 또한 시스템의 성능을 열화시키는 안테나에 의한 떨림을 제거하기 위해, 저항을 사용하였고, 송수신 안테나는 시간영역 시뮬레이션을 통하여 최적화 하였다. 지중 매질의 영상화를 위해 마이그레이션을 기법을 사용하였으며, 지면의 영향 등에 의한 수신된 펄스의 왜곡 현상은 시간영역에서의 잡음 및 신호 왜곡 저감 기법을 사용하여 성능을 개선하였다. 최적화된 설계 방법의 평가를 위하여, 지중 매설물 탐지용 레이더 시제품을 개발하였고, 성능 시험을 위한 시험장을 활용하였다. 측정 결과 수직 심도는 이론적 인 해 상도만큼 우수한 성능을 보였다.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.968-980
• /
• 2023

The dynamic structural responses are sensitive to the time-frequency content of seismic waves, and seismic input motions in time-history analysis are usually required to be compatible with design response spectra according to nuclear codes. In order to generate spectra-compatible input motions while maintaining the intrinsic non-stationarity of seismic waves, an improved time-domain approach is proposed in this paper. To maintain the nonstationary characteristics of the given seismic waves, a new time-frequency envelope function is constructed using the Hilbert amplitude spectrum. Based on the intrinsic mode functions (IMFs) obtained from given seismic waves through variational mode decomposition, a new corrective time history is constructed to locally modify the given seismic waves. The proposed corrective time history and time-frequency envelope function are unique for each earthquake records as they are extracted from the given seismic waves. In addition, a dimension reduction iterative technique is presented herein to simultaneously superimpose corrective time histories of all the damping ratios at a specific frequency in the time domain according to optimal weights, which are found by the genetic algorithm (GA). Examples are presented to show the capability of the proposed approach in generating spectra-compatible time histories, especially in maintaining the nonstationary characteristics of seismic records. And numerical results reveal that the modified time histories generated by the proposed method can obtain similar dynamic behaviors of AP1000 nuclear power plant with the natural seismic records. Thus, the proposed method can be efficiently used in the design practices.

• 한국통신학회논문지
• /
• 제25권6B호
• /
• pp.1082-1091
• /
• 2000

본 논문에서는 QAM (Quadrature Amplitude Modulation)을 시용하는 OFDM (Orthogonal Frequency Division Multiflexing)시스템에서 비이상적인 채널에 고속으로 데이터를 전송 시 발생하는 신호의 왜곡으로부터 보다 빠르고 효율적으로 등화를 하기 위한 등화기법을 제안하였다. 일반적으로 기존 OFDM 시스템 등화기법으로 주파수 영역에 단일 탭 선형 등화기를 사용하는 방법이 많이 사용 되었다. 이 경우 실제시스템에서 채널 환경이 시간에 따라 빠르게 변하게 될 경우 채널에 의한 왜곡을 완벽하게 보상해 줄 수없다. 그러므로 본 논문에서는 주파수 영역에 단일 탭 션형 등화기를 적용하는 대신 비선형 등화기를 적용하였으며 비선행 등화기의 단점인 낮은 SNR(Signal-to-Noise Ratio)에서의 급속한 성능 저하를 보완해주기 위하여 시간영역에 선형 등화기를 병행 사용하였다. 주파수 영역의 경우 비선형 등화기를 적용함에 있어 in-phase성분과 quadrature성분으로 구성되어 있는 QAM신호가 complex 채널 통과 시 fading에 의해 왜곡된 신호도 noise에 의해 왜곡된 신호처럼 in-phase성분과 quadrature 성분의 amplitude만이 변하므로 기존의 등화기 구조에서 cross성분을 제거하였고 이로 인하여 발생할 수 있는 약간의 오차를 보상해 주기위해 시간영역 등화가와 수렴 속도가 빠르고 오차가 적은 알고리즘을 사용하여 복잡도가 줄어든 등화기 구조를 제안하였다. 시간영역의 경우 채널왜곡에 강한 Goldcode를 trauung-sequence로 보호구간에 삽입하여 매 frame 마다 등화를 행하여 주파수영역 등화기의 성능을 보완해줌으로써 기존의 등화기법과 비교하여 보다 빠르고 효율적인 등화를 수행할 수 있는 등화기법을 제안 하였다.