• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.371-375
• /
• 2015

Design-Build (DB) has gained in popularity in roadway projects due to its defining advantage to improve communication and fast-track project delivery. However, very little is known about the impact of change order frequency and occurrence timing pertaining to DB projects. The study analyzes their impacts on project time and cost performance by conducting a rigorous numerical analysis drawing on 530 3R (rehabilitation, reconstruction, and resurfacing) projects completed between 2002 and 2011 in Florida by using a multiple linear regression. The results indicate that DB outperformed Design-Bid-Build in project cost as well as time. Critically, the regression analysis signifies that earlier change order occurrence caused more unfavorable impacts on schedule and cost. The proposed analyses and models will lead to the improved ability of agencies to quickly and more reliably estimate the potential change order impacts on schedule and cost.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.203-211
• /
• 2009

Korean public owners who order public multi-family housing construction projects have yet to gain access to a model for predicting construction cost. For this reason, their construction cost prediction is mainly dependent upon historic data and experience. In this paper, a cost-prediction model based on Case-Based Reasoning (CBR) in the design phase of public multi-family housing construction projects was developed. The developed model can determine the total construction cost by estimating the different Building, Civil, Mechanical, Electronic and Telecommunication, and Landscaping work costs. Model validation showed an accuracy of 97.56%, confirming the model's excellent viability. The developed model can thus be used to predict the construction cost to be shouldered by public owners before the design is completed. Moreover, any change orders during the design phase can be immediately applied to the model, and various construction costs by design alternative can be verified using this model. Therefore, it is expected that public owners can exercise effective design management by using the developed cost prediction model. The use of such an effective cost prediction model can enable the owners to accurately determine in advance the construction cost and prevent increase or decrease in cost arising from the design changes in the design phase, such as change order. The model can also prevent the untoward increase in the duration of the design phase as it can effectively control unnecessary change orders.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.155-158
• /
• 2009

During the construction project period, a lot of change orders happen in the design and construction stage Especially, The change order during construction stage causes the huge construction cost increase and duration delay. Accordingly, research on the change order of the construction stage is being progressed relatively active in the design stage, but the design changes are rarely made. In the design stage, the owner has to pay a design addition cost when change order due to the demands of owner happens. However Korea has not the specific standard about design additional cost in design stage. Therefore, this study analyzes problems of design additional cost estimation methods through the case study, and then indicates the method that the ratio distributes to details dividing design tasks and the method of the PM(Project Management). Eventually, this study expects to minimize claim related the design additional cost in design stage.

• 산업공학
• /
• 제13권1호
• /
• pp.60-64
• /
• 2000

Faced with increasing competitive pressures to reduce time-to-market, many business organizations have recognized that shortening the design cycle by taking full advantage of their intellectual property is inevitable in maintaining their market share. This paper describes a knowledge management system for machine tool design. Product structuring, change management, and complex design knowledge management are possible through the developed system. The system can speed up the design process by making necessary data instantly available as it is needed and keeping track of all the relevant design information and knowledge including individual decisions, design intentions, documents, and drawings.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.231-232
• /
• 2016

Configuration Management (CM) is a process of identifying and documenting the characteristics of a Structures, Systems and Components (SSCs), and of ensuring that changes to these characteristics are properly assessed, approved, issued, implemented and verified. There are requirement management, change control, facility configuration information management for CM activities. In order to improve safety of Nuclear Power Plant(NPP), it is necessary to manage change item systematically. Existing CM concept is focused on the NPP in operation. On the other hand, NPP under construction is difficult to efficiently manage the change because of different change process from varoius stake-holders. This research considers method of consolidation change process for NPP to ensure that approved changes are accurately reflected in the design requirements, facility configuration information, and the physical configuration.

• 한국건설관리학회논문집
• /
• 제11권2호
• /
• pp.74-82
• /
• 2010

정부기관은 공사계획단계 및 시공 중 발생하는 설계변경으로 인한 공사비 증가가 23,663억 원에 달하는 것으로 발표한바 있다. 설계변경은 표준화가 어려운 건축설계의 특성으로 인해 발생하는 현상으로 발주자의 요구사항변경, 관련 제도, 설계 부적정, 현장여건 등 건설프로젝트 전반에 걸쳐 그 원인이 존재하기 때문에 기본설계 및 중간설계 단계에서 완벽한 설계를 한다 하더라도 설계변경을 예방하고 감소시키는 데에는 한계가 있다. 또한 공사계획 및 시공단계에서 단편적 인 검토만으로 설계변경안을 선정하는 현행 관리프로세스는 또 다른 설계변경을 유발시켜 재시공과 그에 따른 공사비 증가의 주된 원인이 되고 있어, 공사계획 및 시공 중 발생한 설계변경에 효율적으로 대처하는 방안이 요구되고 있다. 이에 본 연구에서는 CM 발주방식의 건축프로젝트를 대상으로 건설사업관리자가 프로젝트 수행 중 발생하는 설계변경에 대하여 다수의 설계변경안을 비용, 성능, 시공성 측면에서 복합적이고 정량적으로 평가하여 적정 설계변경안을 선정할 수 있는 의사결정지원 프로세스의 논리구조와 기본모형을 제시하였다.

• 품질경영학회지
• /
• 제42권2호
• /
• pp.145-152
• /
• 2014

Purpose: As the number of people directly employed in making things declines, the cost of labour as a proportion of the cost of production and delivery will diminish too. This will make to move the focus of quality management because new manufacturing techniques make it cheaper and faster to respond to changing local tastes Methods: This discussion is induced by understanding that change the point of view of quality. Results: Mark-processing method using a mold of 3D-printer is different from traditional manufacturing methods. Design, rapid prototyping of products produced by the right way, many changes in many industries will be created. Therefore, the design will be more emphasis on the importance of quality. Conclusion: As manufacturing goes digital, a Quality great change is now gathering pace. It will allow things to be made economically in much smaller numbers, more flexibly and with a much lower input of labour, thanks to new materials, completely new processes such as 3D printing. So we must change the vantage point of quality, from process to Design, R&D, and Delivery.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1998년도 추계학술대회 논문집
• /
• pp.166-170
• /
• 1998

Classification and Coding(C&C) systems as a core of design information management have been accomplished by many studies in terms of design and manufacturing attribute based on Group Technology. Those are very difficult to apply in make-to-order(MTO) manufacturing because the environment of MTO has various characteristics of product, many licensors, engineering change, insufficiency of integrated management system for codes and so on. This paper presents a suitable C&C system to MTO manufacturing which consider management level and drawing.

• 산업공학
• /
• 제12권1호
• /
• pp.79-93
• /
• 1999

As most of information systems developed are data-centric rather than process-centric, it is difficult for users to understand and manage the system from the viewpoint of work processes. To resolve the problem of the data-centric design, we propose a new method to design WFMSs(Workflow Management Systems), which are focused on processes and modified from current information engineering methods. In this research, the drawing approval and engineering change approval process of a K manufacturing company has been analyzed as a sample process. This method takes two steps, i.e., process analysis and system design. In the prosess analysis, data and processes are analyzed, and functions and tasks are derived from the processes. In the system design, a data model for the operation of WFMS is designed, and based on this data model, build-time and run-time functions of WFMS are designed.

• 한국건설관리학회논문집
• /
• 제10권4호
• /
• pp.38-49
• /
• 2009

최근 정부 공사를 중심으로 기술경쟁이 가능한 설계시공일괄 입찰방식이 확대 적용되고 있는 추세이며 이러한 시장의 변화에 따라서 그 중요성이 더욱 증가할 것으로 예상된다. 일반적으로 설계시공일괄방식의 단위 건설사업 생애주기는 기획, 기본 설계, 입찰, 계약, 상세설계, 착공, 시공, 준공, 평가의 진행단계를 가지게 된다. 계약자의 측면에서 주무부서의 잦은 변화로 효율적인 프로젝트 관리와 일관성 있는 정보의 공유가 어려워지는 문제점이 드러나고 있다. 이러한 문제점을 해결하기 위해 기존의 주무부서에 따른 기능 중심의 관리 체계에서, 프로젝트 중심의 관리 프로세스 체계로의 전환이 필요하다. 본 연구에서는 이러한 필요성에 따라 단위 프로젝트의 진행단계별 관리 프로세스 모델 개발을 목적으로 하였다. 이를 위해서 설계시공일괄방식의 진행단계별 주요 관리 쟁점과 의사결정 사항, 업무 분석을 하였고, 진행단계별 관리 주제의 책임 및 권한과 주요 관리 포인트의 변화를 분석하여 체계화 하였다. 프로젝트 특성별 및 진행단계별 연결고리가 되는 핵심 정보를 정의 하고 정보의 흐름을 분석하였으며, 이를 바탕으로 최종적으로 발주계획 수립 단계부터 실시설계 심의 단계까지의 업무 프로세스를 모델링하고 각 수행 주체별 업무프로세스를 모델링 하여 단위 프로젝트의 진행단계별 관리 프로세스 모델을 개발하였다.