• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1633-1640
• /
• 2000

The finite element analysis (FEA) is widely used in modem structural dynamics because the performance of structure can be predicted in early stage. However, due to the difficult in determination of various uncertain parameters, it is not be easy to obtain a reliable finite element model. To overcome these difficulties, updating program of FE model is developed by consisting of pretest, correlation and updating. In correlation, it calculates modal assurance criteria, cross orthogonality, mixed orthogonality and coordinate modal assurance criteria. For the model updating, the continuum sensitivity analysis and design optimization tool (DOT) are used. The SENSUP program is developed for model updating to obtain physical parameter sensitivity. The developed program is applied to practical examples such as the base plate of HDD, BLDC spindle motor, and upper housing of induction motor. And the sensor placement for the square plate is compared using several methods.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.435-442
• /
• 2002

Fluid Confirmation Tests(FCT) on 1500 ground Anchors install in weathered rock were carried out to investigate upper and lower limit of elastic elongation, frictional resistant of fixed anchor body, mobilized angle between anchor body and soil. All the measured data were analysed and compared with theoretical equations. The frictional angles of diaphragm wall and anchorage system in weathered rock showed nonlinear curve between upper and lower limit of standard elongation. The FCT results indicated that the frictional resistant angles increased with higher values of surcharge load. The quality assurance on the fixed anchor location was investigated by means of measuring elastic elongation during the FCT, and comparing these with theoretical design length, the quality of anchors in this particular site found to be above average standard. The results of this research works with provide valuable guide line on quality assurance of anchors system as well as resonable prediction of friction resistance between the fixed anchor body and the weathered rock.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.379-382
• /
• 2010

This study proposes a way to validate BIM data quality in BIM applications. Solibri model checker is adopted as a module development platform, which is based on Java programming language. The platform makes application developers implement BIM model checker for their own purpose. This study has developed a BIM validation module for circulation analysis of building design. The validation module enables end-users to automatically detect data corrupted or not defined. In case studies, the module found that an IFC file generated from a BIM software has wrong relation information between a space and boundary elements. A building model should satisfy modeling requirements and then domain users can get analysis results. The BIM data validation module needs to be developed in each BIM application domain.

• Nuclear Engineering and Technology
• /
• v.39 no.3
• /
• pp.171-186
• /
• 2007

Critical issues in the development targets for the future fast reactor(FR) cycle system, including sodium-cooled FR were to ensure safety assurance, efficient utilization of resources, reduction of environmental burden, assurance of nuclear non-proliferation, and economic competitiveness. A promising design concept of sodium-cooled fast reactor JSFR is proposed aiming at fully satisfaction of the development targets for the next generation nuclear energy system. A roadmap toward JSFR commercialization is described, to be followed up in a new framework of the Fast reactor Cycle Technology development(FaCT) Project launched in 2006.

• Structural Engineering and Mechanics
• /
• v.73 no.1
• /
• pp.27-35
• /
• 2020

In rail industry, noise reduction is a concern to decrease environmental pollution. The current study focuses on rail damper modeling and improvement of the model through validation with experimental results. Accurate modeling and simulation of rail dampers, specifically tuned rail dampers with layers interconnected by bolt joints, shall enable objective-oriented improvement of their design. In this work, to improve the damper model cone pressure theory is applied in the FE model and the sensitivity analysis is then applied to gradually improve the FE model. The improved model yields higher Modal Assurance Criterion (MAC) values and lower frequencies deviation.

• Journal of the Korean Society of Systems Engineering
• /
• v.11 no.2
• /
• pp.125-135
• /
• 2015

Various methods have been used for safety and reliability as it becomes more difficult to ensure safety owing to the increasing complexity and scale of systems. This study aims at making it easier and more efficient to discuss risks and countermeasures for completeness, review, and knowledge transfer by improving methods to create fault tree analyses which focus on the GSN [1], which are among the methods used to describe assurance cases. More specifically, the purpose of this study is to incorporate strategy and context, GSN concepts, along with reason, which is a new concept, into FTA; the study focuses on three points. One point is support for the safety designer to draw a mutually exclusive and collectively exhaustive (MECE) FTA. The second is to make it easier to understand diagrams and meanings of FTA compared with the usual methods. The third is to make creating an FTA more efficient and to pass on existing know-how. Eventually, FTA can achieve completeness, review, and knowledge transfer. An introduction is provided in the first section. Next, the methodology covered in this paper is explained in the second section. The third section describes the proposed notation method based on two proposals made in this paper. In the fourth and fifth sections, results and discussion are provided, respectively. Finally, in the sixth section, conclusions are described.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.122-129
• /
• 2021

Purpose: This study aimed to design a multipurpose dose verification phantom for external audits to secure safe and optimal radiation therapy. Methods: In this study, we used International Atomic Energy Agency (IAEA) LiF powder thermoluminescence dosimeter (TLD), which is generally used in the therapeutic radiation dose assurance project. The newly designed multipurpose phantom (MPP) consists of a container filled with water, a TLD holder, and two water-pressing covers. The size of the phantom was designed to be sufficient (30×30×30 cm³). The water container was filled with water and pressed with the cover for normal incidence to be fixed. The surface of the MPP was devised to maintain the same distance from the source at all times, even in the case of oblique incidence regardless of the water level. The MPP was irradiated with 6, 10, and 15 MV photon beams from Varian Linear Accelerator and measured by a 1.25 cm³ ionization chamber to get the correction factors. Monte Carlo (MC) simulation was also used to compare the measurements. Results: The result obtained by MC had a relatively high uncertainty of 1% at the dosimetry point, but it showed a correction factor value of 1.3% at the 5 cm point. The energy dependence was large at 6 MV and small at 15 MV. Various dosimetric parameters for external audits can be performed within an hour. Conclusions: The results allow an objective comparison of the quality assurance (QA) of individual hospitals. Therefore, this can be employed for external audits or QA systems in radiation therapy institutions.

• Transactions on Electrical and Electronic Materials
• /
• v.2 no.4
• /
• pp.19-23
• /
• 2001

In this paper, design considerations and manufacturing procedure of 200 class insulation system with polyimide(Kapton) main insulation and silicone resin VPI process on the traction motor thor EMU will be reviewed. The performance test and the long life evaluation test that prove stability and reliability of Insulation system for traction motor will also be introduced.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1498-1499
• /
• 2007

In general, ALT can be used to expect the lifetime of electric machines and accelerated stress testing(AST) is used to evaluate the residual life of insulation system. In this paper, a method to design the accelerated life testing(ALT) for reliability qualification of electrical apparatus is represented.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.2
• /
• pp.113-118
• /
• 2016

Project management is a tool for smooth operation during a full cycle from the design to normal operation including the schedule, document, and budget management, and document management is an important work for big projects such as the JRTR (Jordan Research and Training Reactor). To manage the various large documents for a research reactor, a project management system was resolved, a project procedure manual was prepared, and a document control system was established. The ANSIM (Advanced Nuclear Safety Information Management) system consists of a document management folder, document container folder, project management folder, organization management folder, and EPC (Engineering, Procurement and Construction) document folder. First, the system composition is a computerized version of the Inter-office Correspondence (IOC), the Document Distribution for Agreement (DDA), Design Documents, and Project Manager Memorandum (PM Memo) works prepared for the research reactor design. Second, it reviews, distributes, and approves design documents in the system and approves those documents to register and supply them to the research reactor user. Third, it integrates the information of the document system-using organization and its members, as well as users' rights regarding the ANSIM document system. Throughout these functions, the ANSIM system has been contributing to the vitalization of united research. Not only did the ANSIM system realize a design document input, data load, and search system and manage KAERI's long-period experience and knowledge information properties using a management strategy, but in doing so, it also contributed to research activation and will actively help in the construction of other nuclear facilities and exports abroad.