• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.117-122
• /
• 2019

Pipes are widely used in various industries such as automobile, anti-vibration devices, factories and ship building. Chamfering is one of the most critical processes in pipe manufacturing which removes burrs of the pipes for better surface quality. In most cases, the defects of the chamfered surface are originated from the structural vibrations of the chamfering machine. In this study, the dynamic characteristics of a chamfering machine have been analyzed though the experiment and the computer simulation. And the effects of the design parameters affecting the stability of the machine have been investigated to stabilize the machine structure and further to reduce structural vibrations. The result shows that design alterations to stabilize the machine can suppress the defects of the machined surface as well as the vibrations during chamfering.

• Journal of the Korean Society of Costume
• /
• v.50 no.2
• /
• pp.97-109
• /
• 2000

The purpose of this study is to apply 3D computer graphics in fashion design as a creative medium and it attempts to fine out what advantages 3D technique can offer to fashion design. For this purpose, this study, first, tries to develop a 3D digital model in which designer can select design, color , pattern and fabric palette whatever necessary . This study uses of the software named 'Poser of Fractal Design' and the and the 3D digital model comprises four stages ; body modeling, item design (item coordination), color design (color coordination), pattern and fabric design (pattern and fabric coordination). Secondly, this study seeks to accumulate a data base which was produced in the course of case studies, which have applied 3D digital model to design. The outcome of the case studies shows that 3D digital model can enhance designing in the following four aspects. ⅰ) It can give more freedom to designer to try various ideas, revise and modify them, It can also produce random generation. Through this process, the designer test various input and output without damage on fabric after revision and alteration. ⅱ) It can help designers to enhance their accuracy. Since fault in the design developed by the 3D digital model can be detected in advance, designers can make correlation before actual work begins. In the end, designers can express their ideas and intention accurately as well as freely. ⅲ) Since design developed by the 3D digital model can be shared on screen by various actors in the course of priduction such designers , merchandisers, and supervisors, it can help communication between and cut the time of feedback.ⅳ) By using the 3D digital model, designers can work from the begining with awareness of actual outcome their design, since the 3D digital model provide animation, which helps designers to envisage visual changes as they apply various items, colors, pattern and fabrics.

• Plant Journal
• /
• v.8 no.3
• /
• pp.55-63
• /
• 2012

This study aims to suggest the improved business process by analyzing the current design process on work flow of the 3D design of power plant, drawing a problems and setting the improving direction through the integration method of the business process reengineering(BPR). In order to realize the improved business process, the integrated design performance system focused on the 3D design was established and accordingly the study analyzed cases of project performances through the integration system and drew the improved effects quantitatively. In the result of the project performance applied with the 3D design integration system, it showed 20.4% design cost saving effect for appropriate rated cost and the integration of design information from each design parts, sub contracters and vendors reduced overlapped works and improved the consistency of repeated design alteration.

• The Research Journal of the Costume Culture
• /
• v.13 no.2 s.55
• /
• pp.318-328
• /
• 2005

Our interest in human body is more and more increasing. Not only academic and art communities but also other social communities show a keen interest in the human body. Especially, the breast of women's body parts may be comparable to men's penis because it is protruded. The breast which sexually distinguishes women from men becomes an important topic in the fashion design community. Therefore, such designs which emphasize the breast are being introduced in a natural way. This paper aims at examining the reason and symbolism for the exposure of breast and analyzing the fashion design that breast is exposed. This study will help us grasp the meaning which the design has. The exposure's scope of breast in the design includes the partial exposure, total exposure and the concealment of breast. But these all have their effects in each scope. For this paper, some general things were investigated. They are as follows: the phases of breast exposure in the fashion design, the exposure of breast expressed in the works of fine art, and the alteration of breast-exposing phenomenon shown in apparels. Then, each type of breast-exposing design shown in the women's fashion was analyzed from the middle of 1980s' when the phenomenon of breast exposure occurred to the year 2004. These could be divided into 4 types. They include a suggestive type, an exaggerative type, an open type and a reproductive type. As the result of analysis of 4 types, such meanings of design as an emphasis of femininity, an expression of liberty, a symbol of maternity and a commercialization of sex could be analogized.

• Korean Institute of Interior Design Journal
• /
• v.21 no.4
• /
• pp.40-47
• /
• 2012

Courtyard is evolving from the conventional one element of a building far beyond into independent peremeter of urban architecture, of which function has been darmatically upgraded from embedded traditional air fluiding, nutural lighting system into where full fledged function can be experienced so much as your imagimation reaches taking major social responsibility such as intact offline social networking which links people from neighbors, inter / extra buiding openness which allow people can communicate among othewise between themselves and artificial natural environmental emelents supplier where people resort to relaxation and natural healing. Roles of courtyard has been by far streatched out into nearby natural healing space where people can shake off their unavoidable stresses from the modern life relaxing themselves looking at the sky otherwise observe natural surroundigns such as plants, flowers and waters. Thanks to hereonto mentioned its merits, Courtyard building is widely used and seen as a center of modern urban design in residence, public bilding and urban planned buildings. Courtyard biulding is nowadays boasting their morphological diversity brought out from lots of topological variation, type variants, cross section and inter relationship with the other neighboring spaces. Hence, hereby I have been studied how above mentioned three major peremeters of courtyard has been upgraded in modern architecture comparing the period from 1960 to 1990 and the period starting from 1991.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.3
• /
• pp.205-216
• /
• 2012

Korean traditional wedding ceremony was conducted with some regular procedure and there were used special Gyubang crafts for wedding ceremony. Nowadays there is common the western style wedding ceremony and then the use of wedding Gyubang crafts have being decreased. Purposes of this study are to investigate characteristics of and to propose some idea of preservation and application them in the life of today. The results are as follows; Wedding Gyubang crafts can be classified Bojagj(wrapping clothes), Jumeony(cloth bags), ornaments, items related to sewing and others. They were apt to be traditionality, symbolism and shamanism, and were superior in aesthetic sense, the effect of decoration and technical skill. So there was needed preservation them. Some way of preservation and applications them were suggested ; alternation in keeping with modern needs, use of ornament, alteration in present-day life, application their image to Korean cultural products, textile design and so on. Several works were developed by ways suggested and exhibited in order to arouse new understanding Wedding Gyubang Crafts to public.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.143-152
• /
• 2004

Recently, software programming method based on EJB for object oriented software design and implement has been used frequently. Usually, case that use permanent data that use Database in EJB base application is most. Part connected with Database-Access that take charge in Entity Bean class of server side creation program. In this paper using J2EE relationship DAO pattern class each separate. This is no much difference with existent pattern method, but in same pattern common classes are designed so that composition may be possible. And as well as use Entity Bean class that created each DBMS classes are different, is doing Rata Source so that connection work is available without alteration or creation of additional program in several DBMS environments.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.2
• /
• pp.214-222
• /
• 2017

Maritime deck machinery relies heavily on the importation of components produced by overseas companies. Our research defines design parameters for hydraulic winch regulators used in maritime deck machinery. Using Amesim, we were able to conduct 1D modeling, and utilizing CFS then enabled us to create 3D models. These models were analyzed in our research for changes in pressure on each port that resulted from the regulator's spring constant and changes in the primary tension-compression field. Our research then analyzed alterations in traits caused by changes in the length of overlap between the spool and sleeve. Last but not least, our research analyzed the trait alteration resulting from changing the interval between the spool and sleeve. We believe the results of our research can be used to design a hydraulic winch regulator used in maritime deck machinery that does not require importation.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.34-39
• /
• 2017

Semiconductor is one of the most internationally competitive areas among domestic industries, the major concern of which is the stability of the wafer manufacturing processes. The first process for the manufacturing of the semiconductor wafers is the ingot growing. The vibrations are supposed to be the most important factors for the ingot quality. In order to maintain the ingot quality, the growers have the automatic shut-down equipments which are activated by vibrations, and are sensitive enough to react to the earthquakes generated in Japan. In this study, the structure of an ingot grower was analyzed through experiments and computer simulations, and further the effects of design alterations to suppress the vibrations have been investigated. The final result shows that the vibrations can be reduced substantially to improve the stability of the structure.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.4
• /
• pp.72-78
• /
• 2006

Inherent in machine tool structures are the vibrations which are generated by rotating parts such as motors, spindles and chucks. The vibrations not only hurt the precision machining but also damage the structures, and become more serious with time. Many of the old machine tools show severe vibrations for the desired accuracy of the modern industries. It is too much of a waste, however, to get rid of them as scraps. There have been many researches in order to suppress the vibrations of old machine tool structures using the tool post which utilizes actuators to compensate the existing vibrations and using the dampers or absorbers attached to some critical parts. In this paper, the dynamic properties are analyzed to obtain the natural frequencies and mode shapes of a machine tool structure which reflect the main reasons of the biggest vibrations under the given operating conditions. And the feasibility of improving the stability of the structure has been investigated with minor design changes and expenses. The result of the study shows that simple changes based on proper system identification can considerably improve the stability of the machine tool structure.