• Rapid Communication in Photoscience
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2016

Fluorescent receptors have gained much attention because of their usefulness in analysis and clarification of the roles of biomolecules in living systems. Molecular structures of the integrated type including that the receptor itself is fluorescent, and play an important role in having the functionality or selectivity of the fluorescent compounds. These spaced type fluorescent receptors are required to have special molecular design in order to transmit the information of molecular recognition to the fluorescent unit through the spacer unit. Compared with the spaced type fluorescent receptors, number of the integrated type receptors is limited due to the difficult molecular design and synthesis. Modification of alteration of the fluorophore frequently caused deterioration of the fluorescent property. Various spaced type and integrated type fluorescent receptors including switch on-off receptors are introduced in this article.

• Journal of Environmental Science International
• /
• v.9 no.3
• /
• pp.193-199
• /
• 2000

This study is carried out the analysis of the runoff characteristics for the design of the interior drainage systems by SWMM in urbanization basin. The basin analyzed in this study is Bumuh-chun basin which is located in Susung-gu of Taegu city. Huff method is used for rainfall distribution analysis. The optimal rainfall duration in Bumuh-chun basin is analyzed as about 90 minutes decided from comparison of arrival time and critical duration. Flood flow variation pattern is proposed through the comparison of the results of peak flow and peak time analyzed by SWMM about pre-urbanization and post-urbanization of Bumuh-chun basin. It is known that the variation of arrival time caused by the rapid increase of pavement rate in the upper area shows about 20∼25 minutes faster than pre- urbanization. Therefore, the management of surface water for design of water supply and drainage, and channel alteration has to considered the variation of geological factors according to urbanization.

• Korean Institute of Interior Design Journal
• /
• no.29
• /
• pp.173-180
• /
• 2001

The present time this country is faced with general hospital building remodeling time from the constructing age. In architecture, one of the reconstruction of consciousness, remodeling significance Is restoration of capacity a generally structure. Through this research we acquire concluding remarks. 1) In hospital extension and reconstruction works set a different counterplot proportionately with part that are the ward areas, the outpatient areas, the diagnosis/treatment areas, the supply areas, the administration areas, the education/research areas, the miscellaneous areas etc. According to department's character and use various purposes take proper measures. Then it estimation that remodeling study shall be need. 2) It is advisable the way of connection the existing facilities if it extended case. The case of K hospital has been extended outskirts the main building. As this an enlargement of a outhouse has an advantage that secure construction area at a stretch and no exert Influence on both nature lighting and construction matter. On the contrary caused [defect that is repeatedly occur a faculty relocation and the inner part alteration because of it\`s post transfer.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.39-46
• /
• 2016

This paper reviews design validity before manufacturing HCVT prototype through simulation. The component part is being devided, modeled and checked if it works well to an designer's original intent about some active modes. Also, the dynamic characteristic is examined how it changes according to alteration of pressure, friction and leak rate. Finally, HCVT design plan is being confirmed if it could be materialized through those analysis.

• Korean Journal of Remote Sensing
• /
• v.21 no.5
• /
• pp.433-443
• /
• 2005

This paper show that, without installation of expensive VR (Virtual Reality) program, the sharing information is possible through posting three-dimensional road structures on the web, and avoiding the conventional top-down decision making method, fast bottom-up communication is possible base on the Virtual GIS (Geographic Information System). In this paper, using Viewpoint Scene Builder, internet-based software, the transformation was conducted to give pertinent type for web posting. In order to use the completed route at the scene builder, the output with ASCII Export is required, and ASE (ASCII Scene Export) contains the property information including the coordinate and frame of mesh vertex. Through in advance recognition of the problems regarding route design and petition due to environmental rights infringement, the time and cost due to design alteration can be reduced. It's difficult to provide VR based on the internet because file that embodied with internet GIS was complicated and its capacity comes to scores of mega-bites. But, this study provides VR with internet according to a basis by simplification of files.

• Korean Institute of Interior Design Journal
• /
• v.13 no.4
• /
• pp.110-117
• /
• 2004

Recently the hospitals or clinics tend to get out of the functional and technological aspect so as to gradually emphasize service for patients. While qualitative rather than quantitative alteration is noticeable, the scale of clinics is getting larger. Especially, the opulence resulted from economic, social and cultural development has enabled more people to visit dermatology or plastic surgery besides treatment for disease. Responding to this tendency, dermatology is focusing on skin beauty, plastic operation, controlling obesity, etc. for women rather than ordinary treatment. Thus, dermatology is in need of space for skin control as well as ordinary treatment, which raises the immediate necessity of new plan for space and interior environment. In order to meet such necessity of dermatology, it is required to fully study and consider the plan for interior space. First, the purpose, scope and method of research will be defined in the introduction. Second, the concept of clinic as well at the characteristic of dermatology will be studied by theoretical investigation. Third, the general concept of dermatology will be analyzed by examining the characteristic of each room in dermatology, the moving line of nurses and patients, the color of dermatology and the design factor of finishing materials through general investigation on dermatology. Fourth, in order to look into the general case of dermatology, the object of examination will be selected for examination through literature and visiting. After examining data, the result will be analyzed and evaluated to prepare the ground for interior plan of dermatology.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1728-1737
• /
• 2003

The vertical lathe is a very popular machine tool in modem manufacturing industries because of its small area of installation. The small installation area is highly desirable for the flexibility improvement of the manufacturing systems such as FMS, CIM, and IMS. The vertical lathe, however, has much taller height compared to the traditional horizontal lathe, and consequently more severe vibrations. In this study, the structure of a vertical lathe is analyzed to investigate the dynamic properties and further to establish some ideas of the design alteration for the improved dynamic stability even at the higher operating speed. The simulation model is implemented to apply those design alterations for the optimization. The result of this study is not only prosperous but also ready to be applied to the optimum design of various machine tool structures for the improved stability.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.56-62
• /
• 2012

This paper presents design and implementation of the speed controller for DC motor system using Embeded Target for TI C2000 DSP library in Matlab/Simulink is introduced. Speed controller are easily design and implemented by using the Matlab/Simulink program. Feedback of motor speed is processed through eZdsp F2812 AID converter using encoder and pulse meter as speed sensor. Real-time program of controller is drawn using Simulink and converted program code for speed control of P control, PID control and parameter estimation base adaptive control is downloaded into the TI eZdsp 2812 board. Experiments were carried out to examine validity of speed response for implemented controllers. And even if controlled plant becomes alteration studied controller design and implementation easily method.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.1
• /
• pp.97-109
• /
• 2004

The disposal of stormwater is one of the major problems in urban water management. One method of reducing peak runoff rates and other detrimental impacts of stormwater is detention storage. Detention ponds as a water quality control alternatives have been investigated by a number of researchers. Recognizing multiple roles such as flood peak attenuation, pollution removal and aesthetic enhancement, the design and management of detentions ponds deserve more research. The purpose of this research is to establish design criteria wet detention ponds to improve water quality. Water quality in detention pond discharge might be improve with physical, chemical and biological alterations. Physical alteration was focused in this study. There are several methods for estimating the suspended solid control capability of wet detention ponds. Existing models of suspended solids removal are based on sedimentation and gravity settling theory. The pollutant trap efficiency of pond is a function of several interrelating factors. Detention time is the most important factor, because it determine gravity settling quantities of pollutants. Desirable modification of physical factors for improvement of water quality in wet detention ponds are volume ratio, area ratio, length to width ratio, depth, out let location, bottom soil type. In order to apply design procedure in actual site, Namak new town development area was selected.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.3
• /
• pp.59-64
• /
• 2018

In recent years, the solar cell market has steadily grown with the demand for new energies. And wire sawing is one of the most critical processes in manufacturing solar cell wafer which is supposed to affect the breakage of wafers most during the process and afterwards. Generally, the defects of the wafers are generated from the structural vibrations of the machine. In the sawing process, the vibrations cause unnecessary normal stress on the cut surface of wafers, and eventually create the surface damage or leave the residual stress. In this study, the dynamic properties of a wire saw have been analyzed through the frequency response test and the computer simulation. And the effects of the design alterations have been investigated to stabilize the machine structure and further to reduce the vibrations. The result shows that relatively simple design alterations of supporting structure without any change of major parts of the machine can suppress the vibrations of the machine effectively.