• 멤브레인
• /
• 제30권3호
• /
• pp.190-199
• /
• 2020

2018년 환경부에서 발표된 수도정비기본계획에 따라 다양한 수자원 활용의 중요성이 증가하고 있으며, 여러 수원을 혼합하여 원수 또는 생산수로 활용하는 워터 블렌딩 방식은 미국, 호주를 비롯한 여러 나라에서 시도되고 있다. 본 연구에서는 공업용수 공급 목적으로 100,000 ㎥/일 규모 해수담수화 사업이 추진되고 있는 충남 대산 지역을 대상으로, 해수와 호소수, 침전수, 폐수 방류수 등 타 수원을 블렌딩할 때 수종 및 혼합비율에 따른 영향을 분석하였다. 타 수원 혼합비율 10~50% 조건에서 혼합수 염분농도는 약 50%까지 감소하였지만, 탁질 및 유기물 농도는 1.6~2.0배 수준으로 증가하는 것을 확인하였다. 실험실 규모 역삼투 공정 성능평가 결과, 해수의 단독활용 대비 원수 혼합 시 막오염 경향이 증가하였으며 혼합비율 10~50%에서 평균 4.1배의 플럭스 저감률을 나타내었다. 성능모사를 통한 역삼투 공정 성능분석에 따르면 혼합비율 50% 조건에서 역삼투 공정 에너지 사용량이 평균 39% 절감될 수 있을 것으로 기대되나, 운영비용 등 혼합수 활용에 대한 전반적인 영향분석을 위해서는 모형플랜트 규모에서 장기간 성능평가가 필요하다.

• Steel and Composite Structures
• /
• 제47권6호
• /
• pp.781-794
• /
• 2023

In order to directly apply seawater and sea sand in construction without desalination, a type of square concrete-filled steel tube (CFST) encased with prefabricated seawater sea-sand concrete filled Polyvinyl Chloride (PVC)/Glass Fiber Reinforced Polymer (GFRP) tube column was proposed. Twenty short columns were tested under uniaxial loads, and the test parameters included inner tube types, seawater sea-sand concrete replacement ratios, concrete strength, the wrapping area of Carbon Fiber Reinforced Polymer (CFRP) strips and the thickness of GFRP tube. The effects of the parameters on failure modes, loading capacity, ductility and strain responses were discussed. All the tested specimens failed with serious buckling of the steel tubes and fracture of the inner tubes. The specimens had good residual bearing capacity corresponding to 64% to 88.9% of the peak capacity. The inner GFRP tubes and PVC tubes wrapped by CFRP strips provided stronger confinement to the core concrete, and were good choices for the proposed columns. Moreover, an analytical model for the composite column with different inner tube types was proposed.

• 청정기술
• /
• 제20권1호
• /
• pp.13-21
• /
• 2014

최근 도서지역 지하수의 염분증가로 인해 지하수가 점차 생활용수로 부적합해 짐에 따라 해수담수화의 필요성이 크게 대두되고 있다. 이러한 해수담수화를 수행하기 위해서는 많은 에너지 비용이 들어가는데, 최근 에너지가격의 상승으로 경제성 확보가 어려운 실정이다. 지열에너지를 활용한 연계형 플랜트가 문제를 해결하는 중요한 방법이 될 수 있다. 지열시스템은 지구 내부의 온도를 이용하는 방법으로서 항상 온도가 일정하며 24시간 활용할 수 있어 이용률이 높다는 장점이 있기 때문이다. 본 연구에서는 지열을 보조열원으로 활용한 진공 막 증류법 해수담수화 플랜트를 설계하고, 지열과 연계하지 않은 일반 진공 막 증류법 해수담수화 플랜트와 경제성 비교분석을 했다. 그 결과 할인율 5%일 경우 지열연계형이 $23,822,409 만큼 더 높은 순현재가치 값을 가지며, 운영기간 5.36년을 분기점으로 두 플랜트의 현금흐름이 역전되어 지열연계형 플랜트가 일반 진공 막 증류법 해수담수화 플랜트보다 더 큰 경제성을 갖는 결과를 얻었다. 또한 민감도 분석에서 주요 변수들간의 결과값 비교를 한 결과, 스팀이용비용의 변동폭이 가장 큰 영향을 미친 점에 비추어 스팀비용이 높은 지역일수록 지열에너지 연계형 플랜트가 경제적이고 효과적인 솔루션인 것으로 증명되었다.

• 한국태양에너지학회 논문집
• /
• 제34권2호
• /
• pp.73-81
• /
• 2014

Ocean thermal energy conversion(OTEC) is a power generation method that utilizes temperature difference between the warm surface seawater and cold deep sea water of ocean. As potential sources of clean-energy supply, Ocean thermal energy conversion(OTEC) power plants' viability has been investigated. Therefore, this paper evaluated the thermodynamic performance of solar-OTEC convergence system for the production with electric power and desalinated water. The comparison analysis of solar-OTEC convergence system performance was carried out as the fluid temperature, saturated temperature difference and pressure of flash evaporator under equivalent conditions. As a results, maximum system efficiency, electric power and fresh water output show at 40, 10, 2.5 kPa of the flash evaporator pressure, respectively. And their respective enhancement ratios were approximately 6.1, 18, 8.6 times higher than that of the base open OTEC system. Also, performance of solar-OTEC system is the highest in the flash evaporator pressure of 10 kPa.

• 대한환경공학회지
• /
• 제36권4호
• /
• pp.251-257
• /
• 2014

본 연구는 RO 해수담수화 전처리 공정으로써 응집 및 여과공정에 대하여 수행되었다. RO 시스템은 충분하고 안정적인 전처리를 통하여 RO 막오염을 완화 할 수 있는 우수한 수질을 공급할 수 있어야 한다. 본 실험은 RO 막 공정의 전처리로서 다양한 응집제 주입량, 응집 교반 강도 및 시간, 탁도, 여과속도 실험 조건을 사용하여 응집과 여과공정의 효과를 조사하기 위하여 수행되었다. 본 연구 결과 적합한 RO 공급수로 적절한 SDI 값을 나타내기 위한 최적 전처리 조건은 응집 pH 6.5, 탁도 4 NTU 이상 그리고 여재 충진 높이가 550 mm 이상인 것으로 나타났다. 그러나 응집교반 강도, 응집제 주입농도와 여과속도는 여과효율에 비교적 큰 영향을 미치지 않은 것으로 나타났다.

• 상하수도학회지
• /
• 제34권1호
• /
• pp.53-60
• /
• 2020

Due to global climate change, Korea is experiencing flooding and drought severely. It is hard to manage water resources because intensive precipitation during short periods and drought are commonly occurred in Korea, recently. Severe drought occurred in 2015 and 2017 in the islands, and coastal and inland areas in Korea, and the citizens experienced decreased water supply and emergency water service by using bottled water. Therefore, the Korean government provided additional governmental funds such as the grant of drought disaster. In this study, we tried to calculate the cost of water for drought response based on the cost of tap water for the regional local governments in Korea and the grant of drought disaster by the Ministry of the Interior and Safety in Korea, etc. The estimated costs of water for drought responses in coastal and inland areas which have a chance to apply alternative water sources such as brackish or seawater desalination and water reuse in Korea were higher than in other areas in Korea. Additionally, as the novel approach of drought response, the 300 ㎥/day-scale desalination vessel was suggested to provide desalinated water for the islands in Korea. The estimated expenses of water supply for the target island areas (Sinan-gun and Jindo-gun) by the desalination vessel was lower than those by emergency water service by using bottled water.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.201-201
• /
• 2010

The evaporative desalination system with solar energy would be the efficient and attractive method to get fresh water. This study was described the development of Multi Effect Distillation(MED) with solar energy desalination system. The system was designed and manufactured Multi effect distillation on the capacity of $3m^3$/day. The experimental apparatus consists mainly of ejector pump, Hot water pump, flow meter, demister, cooler, evaporator and condenser. Evaporator and condenser were made Shell&Tube Heat Exchanger type with corrugated tube. The experimental variables were chosen $75^{\circ}C$ for hot water inlet temperature, 40, 60 and $80{\ell}$/min for hot water inlet volume flow rate, 6.0 and $8.0{\ell}$/min for evaporator feed seawater flow rate, $18^{\circ}C$ for sea water inlet temperature to cover the average sea water temperature and the salinity of sea water is measured about 33,000 PPM (parts per million). for a year in Korea. This study was analyzed the results of thermal performance of Multi Effect Distillation. The results are as follows, The experimental Multi effect distillation is required about 40 kW heat source for production of $3m^3$/day fresh water. Various operating flow rate was confirm in the experiments to get the optimum design data and the results showed that the optimum total flow was $8.0{\ell}$/min. Comparison of Single Effect Distillation with Multi Effect Distillation showed MED is at least more than double of SED.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권1호
• /
• pp.59-68
• /
• 2013

본 연구에서는 한외여과막과 역삼투압막으로 이루어진 해수담수화장치를 구성하였다. 해수를 취수하여 디스크필터와 한외여과막을 이용한 전처리설비를 통과시켜 생산한 전처리수의 $SDI_{15}$와 탁도를 측정하여 역삼투압해수담수설비에 적합함을 밝혔다. 역삼투압해수담수설비의 부산물인 브라인을 전처리수와 혼합하여 역삼투압해수담수설비의 입구농도를 변화시켰다. 농도 변화실험에서, 해수농도가 역삼투압해수담수설비의 성능에 끼치는 영향을 실험으로 구하였다. 염배제율, 회수율, 생산수의 수질은 입구농도에 따라 많은 변화가 있었으며, 에너지소비량도 입구농도에 거의 선형적으로 상승하는 것을 실험으로 구하였다.

• 한국태양에너지학회 논문집
• /
• 제30권6호
• /
• pp.137-143
• /
• 2010

In this study, the ejector design was modeled using Fluent 6.3 of FVM(Finite Volume Method) CFD(Computational Fluid Dynamics) techniques to resolve the flow dynamics in the ejector. A vacuum system with the ejector has been widely used because of its simple construction and easy maintenance. Ejector is the main part of the desalination system, of which designs determine the efficiency of system. The effects of the ejector was investigated geometry and the operating conditions in the hydraulic characteristics. The ejector consists mainly of a nozzle, suction chamber, mixing tube(throat), diffuser and draft tube. Liquid is supplied to the ejector nozzle, the fast liquid jet produced by the nozzle entrains and the non condensable gas was sucked into the mixing tube. In the present study, the multiphase CFD modeling was carried out to determine the hydrodynamic characteristics of seawater-air ejector. Two-dimensional geometry was considered with the quadrilateral-mashing scheme. The gas suction rate increases with increasing Motive flow circulating rate.

• Membrane and Water Treatment
• /
• 제13권1호
• /
• pp.39-49
• /
• 2022

Seawater desalination is doubtlessly a viable option to supply fresh drinking water. Nevertheless, RO (reverse osmosis) desalination plants in specific areas may be intermittently operated to match the imbalance between water demand and supply. Although a handful of works have been done on other membrane systems, few studies have attempted to mitigate fouling in intermittent RO systems. Accordingly, the objectives of this paper were to examine the effect of the intermittent operation on RO fouling; and to compare four intermittent operation modes including feed solution recirculation, membrane storage in the feed solution, deionized water (DI) recirculation, and membrane storage in DI water. Results showed that intermittent operation reduced RO fouling under several conditions. However, the extents of fouling mitigation were different depending on the feed conditions, foulant types, and membrane lay-up methods. When the feed solution was recirculated during the lay-up, the restoration of the flux was less significant than that by the feed solution feed-up. The use of deionized water during the lay-up was effective to restore flux, especially when the feed solution contains scale-forming salts (CaSO₄) and/or colloidal silica.