• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.479-490
• /
• 2016

Seabed drilling system has recently been used to drill seafloor mineral resources. This case report highlights the procedure and result of sea-trial of seabed drilling system at off-shore of Japan on March, 2016 as well as briefs an international-technical trend of seabed drilling system. In case of having less than 100 m drill depth, seabed drilling system is favorable for seafloor mineral deposits which are mostly distributed within a narrow district and situated between 1000~3000 m water depth, compared with vessel-mounted drilling system. The system is featured by the remotely-operated drill gear, which has top drives, drill strings and mud system on it. The core samples are generally recovered to ship with seabed driller after a dive. In this sea-trail, recovery rate of core samples averagely shows about 55% and the recovered rocks mostly correspond to fresh and/or weak-altered basalt. In case of drilling hydrothermal ore deposit, the recovery rate would be lower than 55% because of the fragile nature of ores. Alternatively it is used to collect cutting chips through riser or bins in order to increase the recovery rates. Recently a reverse circulation method is taken considered to acquire the better cutting-chips. Three-leg type outrigger system and four-leg type leveling system are the competing landing-instruments of seabed drill system. However the landing efficiency using these gears has to be further monitored due to lack of case reports.

• Journal of Forest and Environmental Science
• /
• v.30 no.4
• /
• pp.383-392
• /
• 2014

In this study, we investigated the Fukiage sand dunes of southern Kyushu, Japan. We surveyed the status of recovery of coastal Japanese black pine forests damaged by pine wilt disease and their disaster prevention capability. We placed two transects: Transect 1, in an area that was severely damaged (80-90% damage rate) by pine wilt disease, and Transect 2, in an area that was mostly undamaged (<10% damage rate). Then, we installed survey lines, carried out vegetation surveys, and measured the depth and pH of humus soil. The survey lines were placed perpendicular to the coastline from the top of the fore-dune to the inland area, and divided into five 50 m sections. Before the point 100 m inland from the top of the fore-dune, the number of invasive hardwoods and of Japanese black pines were small because of the poor growth environment in both transects. Past the 100 m point, the species and number of Japanese black pines and broad-leaved trees increased further inland because the growth environment improved. In addition, the recovery metrics of tree height, diameter at breast height, age, and number in Transect 1 were much lower than those in Transect 2, and the basal area of broad-leaved trees and the depth of humus soil in Transect 1 were lower than in Transect 2, and the soil pH of humus soil in Transect 1 was higher than that of Transect 2. The shape ratio of the Japanese black pine forests indicated that they were insufficient for disaster prevention. Therefore, in order to fully promote the disaster prevention capability of coastal Japanese black pine forests, we should not only focus on prevention of pine wilt disease but also undertake continuous control efforts taking into consideration the sound growth environment such as appropriate density and soil management and removal of invasive broad-leaved trees.

• Economic and Environmental Geology
• /
• v.28 no.6
• /
• pp.553-558
• /
• 1995

The purpose of this paper is recovery of the profiles of the wave speed and density from the reflection coefficients of the continuously layered acoustic medium with depth dependent density and wave speed at various angles of incidence. A downward continuation or layer stripping algorithm, which recursively reconstructs the medium in increasing depth and then strips away the effects of the reconstructed portion of the medium, is the method with fewer computations than integral equation procedures. This paper implements an improved downward continuation algorithm that uses reflection data at several angles of incidence and performs a least-squares fitting at each depth. The result is a considerable improvement in performance over the usual downward continuation algorithm.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.537-545
• /
• 2016

In order to cope with the new and strict government regulations for turbid water discharge from construction sites, this study tested whether synthetic fiber filters can replace conventional best management practices. The filter efficiency was about 10 to 60% with a varying filter depth of 5 to 15cm, presuming extreme storm flow conditions to be in the range of 800 to 1500m/day of filtration rates. Fiber filter acts exactly like a granular filter, i.e. the separation efficiency is directly and inversely proportional to filter depth and rate, respectively. Based on the operational data, we suggested the Log-Log design relationship, which can be used to determine the filter depth and area. Compared to the widely used gravel filter which treats the turbid water at the construction site, about 20% higher efficiency was obtained under similar operating conditions. Cleaning the filter through a simple hand-washing method at the time of break-through, achieved about 90% soil recovery.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.167-171
• /
• 2006

In this study, for the establishment of the performance evaluation methods of repair material and method for reinforced concrete structure and the quality control standards of durability recovery method, the quantitative exposure data by exposure experiment under the coastal and normal atmosphere environment is accumulated and analyzed. Investigating and evaluating the result of exposure experiment during 30 months of exposure age under the coastal and normal atmosphere environment, carbonation depth and chlorideion penetration depth very little penetrated than cover depth. It seems reasonable to conclude that main cause of corrosion of reinforcing bar are inner chloride-ion and macro cell from the result of corrosion area and corrosion velocity. Accordingly, it is considered that fundamental data on the performance evaluation and quality control standards of repair material and method could be presented through continuous exposure test in the future.

• Membrane and Water Treatment
• /
• v.10 no.2
• /
• pp.105-112
• /
• 2019

On the purpose of conform the more stringent government regulation for turbid stormwater from construction sites, the feasibility and availability of synthetic fiber placing after the conventional protection barrier were tested in this study. Initially, comparative work on the filtering performance of fiber media and conventional gravel filter was carried out, 27% higher filtration capacity was obtained under the similar operational conditions. The filter efficiency was about 20 to 52% with a varying filter depth of 5 to 15cm, presuming at extreme storm flow conditions (800-1500 m/day of filtration rates). Fiber filter was found to have a similar filtration prosperity as grain media; namely, the separation efficiency is directly and inversely proportional to filter depth and rate, respectively. The effects of filter aid (polyaluminium chloride) on filter performance was also investigated, it greatly affected the turbidity reduction at the dosage of 2 mg/L. At the time of breakthrough, a simple filter washing was carried out, herein, the solid recovery achieved over than 88% and greatly determined by operational parameters. Based on the operational data, the empirical models aimed for predicting filtration efficiency were established, which can effectively determine the required filter depth and filtration area in field.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1560-1569
• /
• 2022

Liquid fueled molten salt reactors (MSRs) have seen renewed interest because of their inherent safety features, higher thermal efficiency and potential for efficient thorium utilisation for power generation. Thorium fluoride is one of the salts used in liquid fueled MSRs employing Th-U cycle. In the present study, ThF₄ was prepared by hydro-fluorination of ThO₂ using anhydrous HF gas. Process parameters viz. bed depth, hydrofluorination time and hydrofluorination temperature, were optimized for the preparation of ThF₄ in a static bed reactor setup. The products were characterized with X-Ray diffraction and experimental conditions for complete conversion to ThF₄ were established which also corroborated with the yield values. Hydrofluorination of ThO₂ at 450 ℃ for half an hour at a bed depth of 6 mm gave the best result, with a yield of about 99.36% ThF₄. No unconverted oxide or any other impurity was observed. Rietveld refinement was performed on the XRD data of this ThF₄, and Chi2 value of 3.54 indicated good agreement between observed and calculated profiles.

• Tribology and Lubricants
• /
• v.33 no.3
• /
• pp.119-125
• /
• 2017

In this study, we perform a numerical analysis to predict the film thickness and lubrication regions for a thrust ball bearing under different operating conditions. Film thinning and replenishment affect the film thickness in starved lubrication. As the inlet meniscus position is brought to the edge of the Hertz contact, the thin film thickness is calculated as starved equation. We use a film replenishment model to determine the recovery film thickness between rolling elements. We use a hydrodynamic model to describe film recovery, that results from the effects of surface tension. In this model, we consider the surface tension gradient in fluid depression as the driving force for fluid recovery. We use Fourier transform method to determine the time-dependent depth of depressed oil. We calculate the change in the central film thickness graphically by using the recovery equation in starved elastohydrodynamic lubrication(EHL) under operating conditions that include numbers of balls, sliding velocity, applied force, and ambient film thickness. We evaluate the degree of starvation by using the distance from the center of the contact area to the meniscus position. Parched lubrication, a phenomenon where the film thickness decreases consistently, occurs at the severe condition. We determine optimal values with respect to the numbers of balls, and sliding velocity. The investigation can contribute to the design operating conditions for proper lubrication.

• Journal of Veterinary Clinics
• /
• v.21 no.2
• /
• pp.168-171
• /
• 2004

The effects of alterations of dose of xylaznie (X) and Zoltil$\circledR$ (TZ) on canine anesthesia were examined. Experimental groups were divided into three (Group 1: X 1.1 mg/kg and TZ 10 mg/kg, Group 2: X 1.65 mg/kg and TZ 7.5 mg/kg, Group 3: X 2.2 mg/kg and TZ 5 mg/kg), and each had 5 dogs. A femoral artery was catheterized for measurement of blood pressure, and baseline value was measured. The dogs were sedated with xylazine intramuscularly, then after 10 minutes TZ were injected intravenously. Mean arterial blood pressures (MAP), duration of analgesia, mean arousal time (MAT) and mean walking time (MWT) after TZ injection were measured, and the depth of analgesia and the quality of recovery were scored. The values of MAP were recorded from the time of pre-xylazine injection to arousal. Duration of analgesia and was assessed by tail clamping test, and which were done at 10 minutes intervals after TZ injection. The decreases of MAP from 40 minutes after TZ injection were significant (p<0.05). In group 2, MAP at 20 minutes, and from 40 minutes to arousal were significantly decreased (p<0.05). In group 3, MAP were significantly decreased from 40 minutes. MAT were 62.2$\pm$9.2 minutes in group 1, 60.2$\pm$7.5 minutes in group 2, and 71.0$\pm$6.9 minutes in group 3. MAT in group 3 was significantly increased compared with group 2 (p<0.05), and the differences of MWT among each groups were not significant (p>0.05). The scores of quality of recovery were significantly lowered in group 3 compared with group 1 or group 2, which means the side effects of recovery were less occurred. Thus, it was considered that the combination X 2.2 mg/kg IM and TZ 5 mg/kg IV is more effective to surgical procedures and to prevent long and rough recovery of Zoletil anesthesia.

• Economic and Environmental Geology
• /
• v.45 no.1
• /
• pp.59-68
• /
• 2012

With the decline in discoveries of new oil fields and increasing demand from developing countries it is believed that enhanced oil recovery (EOR) technologies will play a key role to meet the energy demand in years to come. Based on the recently-published data, this paper discusses current status of global EOR market and technical development trends. The EOR market includes oil produced through various EOR recovery methods, such as thermal recovery, gas injection, chemical injection. Also, EOR methods are addressed screening criteria by reservoir and fluid characteristics including lithology, depth, thickness, and oil properties such as composition and gravity. Finally, the examples of field applied by various EOR methods are discussed with respect to reservoir characteristics and performance.