• 한국환경복원기술학회지
• /
• 제9권1호
• /
• pp.72-88
• /
• 2006

The optimal environmental ranges of the establishment phase for the distribution of Zizania latifolia and Typha angustifolia was determined to develop a set of basic data and criteria of planting substrate for the restoration, conservation and management of wetlands. The study was carried at 17 wetlands in the Kyunggi-do and Gyeongsangnam-do region where inland wetlands place intensively in June, 2005. Total 127 quadrats were sets in growing areas of Zizania latifolia and Typha angustifolia. $NO_3-N$, K, Ca, Mg and Na in the water variables and soil texture, LOI (loss on ignition), soil pH and soil conductivity in the soil variables were analyzed. The optimal range of water depth for the distribution of Zizania latifolia was -5~39cm, $NO_3-N$ content of water was <0.01~0.19ppm, K content of water was 0.1~5.9ppm, Ca content of water 0.5~44.9ppm, Mg content of water was 1.2~11.9ppm, Na content of water 3.4~29.9ppm, water conductivity was 48~450${\mu}S$/cm, respectively. The optimal range of LOI for the distribution of Zizania latifolia was 1.7~11.9%, soil conductivity was 25.5~149.9${\mu}S$/cm, respectively. The optimal range of water depth for the distribution of Typha angustifolia was -20~24cm, $NO_3-N$ content of water was <0.01~0.19ppm, K content of water was 0.2~2.9ppm, Ca content of water 0.6~19.9ppm, Mg content of water was 0.2~5.9ppm, Na content of water 3.5~19.9ppm, water conductivity was 96~450${\mu}S$/cm, respectively. The optimal range of LOI for the distribution of Typha angustifolia was 2.4~15.9%, soil conductivity was 17.6~149.9${\mu}S$/cm, respectively. The optimal soil texture were loam, silt loam and sandy loam in both species. The lower water depth (-20~40cm) is appropriate to increase biodiversity in both species dominated community and it is better to maintain water depth of 40~100cm for water purification. Both species appear frequently in the soil with high silt content.

• 지질학회지
• /
• 제54권6호
• /
• pp.631-640
• /
• 2018

퇴적층의 두께와 형성 기간을 분석하는 것은 퇴적분지의 발달사를 이해하기 위한 분지 해석과 모델링 연구에서 중요하다. 분지 발달 과정에서 퇴적층은 깊이가 증가함에 따라 다짐 작용에 의해 두께가 감소하고, 이 두께 변화는 깊이에 따른 공극률 변화 경향(다짐 작용 경향)을 통해 계산이 가능하다. 이 연구에서는 대표적인 퇴적암상인 사암, 셰일, 탄산염암의 깊이에 따른 공극률 변화 자료를 기반으로, 암상에 따른 다짐 작용 경향의 범위를 지수 함수를 이용하여 정량화하였다. 그리고 다짐 작용이 퇴적층의 공극률과 두께 변화에 미치는 영향을 수치해석적 방법을 이용해 평가하였다. 사암은 초기 공극률의 범위가 좁고 깊이 증가에 따른 공극률 감소 경향이 비교적 일정하여, 다짐 작용에 의한 층두께의 변화 범위가 작다. 셰일은 약 2,000 m 깊이까지 공극률이 빠르게 감소한 후, 급격히 낮아진 감소율을 보이며 이는 퇴적층의 두께 변화에도 반영된다. 탄산염암은 초기 공극률의 범위가 넓고, 깊이 증가에 따른 공극률 감소 양상의 차이가 커서, 결과적으로 다짐 작용에 의해 감소한 퇴적층 두께 차이의 범위도 크게 나타난다. 이 수치 해석적 다짐 작용 연구의 정량적 분석 결과에서 나타난 각 암상들의 다짐 작용에 따른 공극률과 층두께 감소의 특징들은 퇴적분지의 생성과 발달 과정을 이해하기 위해 필요한 퇴적층 두께 복원과 침강사 그리고 지열 작용 분석에 영향을 끼치며, 이는 다짐 작용 경향이 분지 모델링 연구에서 중요한 요소이며 적절한 적용이 필요함을 보여준다.

• 한국방재학회 논문집
• /
• 제9권3호
• /
• pp.107-115
• /
• 2009

일반적으로 래버린스 위어는 월류부의 평면형상을 변화시켜 월류 길이를 증가시킨 위어이다. 래버린스 위어는 월류량 증대 및 수심유지에 활용될 수 있으며, 수질개선에도 효과가 있다. 그러나 수공구조물로써 기능 및 설계조건을 고려할 수 있는 수심유지 효과에 관한 연구는 상대적으로 부족한 실정이다. 본 연구의 목적은 삼각형 래버린스 위어의 수심유지효과 범위를 제시하여 보다 효율적인 삼각형 래버린스 위어 설계가 가능토록 하는데 있다. 또한, 수심유지 효과는 수리모형실험 및 3차원 수치모형인 FLOW-3D를 이용하여 분석하였다. 이러한 결과, 본 연구에서는 삼각형 래버린스 위어는 시점부까지 전 범위에서 수심유지효과가 나타났으며, 위어 종점부까지 수심이 유지되는 범위($H_t/P=0.08\sim0.27$)를 정량적으로 제시하여 효율적인 설계가 가능하도록 하였다.

• ALGAE
• /
• 제36권4호
• /
• pp.231-240
• /
• 2021

Saccharina sculpera is highly valued for human consumption and value-added products. However, natural resources of this kelp have decreased sharply and it is in danger of extinction. Resources recovery through cultivation is being trialed to enable the sustainable use of this species. In this study, the temperature range for survival and optimal growth of juvenile S. sculpera was identified and applied to field cultivation. This study investigated the survival and growth of juvenile S. sculpera under six temperatures (i.e., 5, 10, 15, 16, 18, and 20℃) and two light intensities (i.e., 20 and 40 µmol photons m^-2 s^-1) in an indoor culture experiment. In these experiments, the blade length decreased at 16℃ under the both light intensities. The thalli died at 20℃ and 20 µmol photons m^-2 s^-1, and at 18-20℃ and 40 µmol photons m^-2 s^-1. During the field cultivation, early growth of S. sculpera was highest at the 5 m depth and growth decreased as the water depth increased. When the initial rearing depth was maintained without adjustment throughout the cultivation period (from December to October), all the cultivated S. sculpera plants died during August and September. However, S. sculpera plants lowered from 5 to 15 m and grew to 90.8 ± 13.1 cm in July. The seawater temperature at 15 m depth was similar to the upper level of thermal tolerance demonstrated by juvenile S. sculpera in the indoor culture experiments (16℃ or lower). The plants were subsequently lowered to 25 m depth in August, which eventually led to their maturation in October. The present study confirmed that improved growth rates and a delay in biomass loss can be achieved by adjusting the depth at which the seaweeds are grown during the cultivation period. These results will contribute to the establishment of sustainable cultivation systems for S. sculpera.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1824-1829
• /
• 2007

In the present paper, limit pressures for axial surface cracked pipe are proposed, and a reference stress based J estimation method is also provided based on the proposed limit pressure solutions. Employed cracks are assumed to be constant-depth, internal surface cracks, and wide ranges of variables are considered.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.148-149
• /
• 2005

In this study, among the precision decline main causes of sounding, I suggested the characteristics of sounding data acquired by echo sounder with increasing of turbidity For this, I acquired sounding data by inputting turbidity inducer artificially in artificial water tank. And then achieved regression analysis. Conclusion are as following : Sounding Capabilities can be divided into three ranges according to the turbidity : normal range, critical range and the range where data can not be obtained by an echo sounder

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.162-167
• /
• 2000

The warm deep drawability in square cup drawing is investigated about a newly developed high-strength steel sheet with retained austenite which is transformed into martensite during forming. For this investigation, six steps of temperature ranges, from room temperature to $250^{\circ}C$, and five kinds of drawing ratio, from 2.2 to 2.6 were adopted. As a result the maximum drawing force and the maximum drawing depth were affected by the elevated temperatures, and the more stable thickness strain distribution was observed to the elevated temperatures. But blue shortness happened over $200^{\circ}C$. The FEM analysis using the LS-DYNA code is adopted to compare the experimental results with the analytical results for thickness strain distribution.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.168-173
• /
• 2000

The limiting drawing ratio (LDR) under uniform heating of blanks was measured at the various temperature ranges between 25 and $250^{\circ}C$ by using two different blank shapes, square and circular blanks, and six different blank sizes with the drawing ratios(DR) of 2.4 to 2.9. The galvannealed steel sheet (SCP3CM 60/60) of 0.7mm thickness was used. The LDR at warm forming condition reached 1.2 times of that at room temperature, and the maximum drawing depth reached 1.9 times. The higher temperature was adopted, the more stable and uniform thickness strain distribution was observed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.63-70
• /
• 1999

Some deep drawing characteristics to the elevated temperatures were investigated for the SCP1 steel sheets by using the Cr-coated die. For this investigations six steps of temperature ranges from room temperature to 25$0^{\circ}C$ and six kinds of drawing ratio from 2.4 to 2.9 were adopted. As a result the limiting drawing ration maximum drawing force and the maximum drawing depth were sensitively affected by the elevated temperatures and the more stable thickness strain distribution was observed to the elevated temperatures, Some experimental results were compared with analytical results using the DYNA-3D code.

• 소성∙가공
• /
• 제11권5호
• /
• pp.423-429
• /
• 2002

The limiting drawing ratio (LDR) under uniform heating of blanks was measured at the various temperature ranges between 25 and 25$0^{\circ}C$ by using two different blank shapes, square and circular blanks, and six different blank sizes with the drawing ratios(DR) of 2.4 to 2.9. The galvannealed steel sheet (SCP3CM 60/60) of 0.7mm thickness were used. The LDR at warm forming condition reached 1.2 times of that at room temperature, and the maximum drawing depth reached 1.9 times. The higher temperature was adopted, the more stable and uniform thickness strain distribution was observed. Some cases of the experimental results were compared with the analitical results using the commercial finite element method (FEM) code.