• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.4
• /
• pp.34-47
• /
• 2000

Since carbon fiber epoxy composite materials have excellent properties for structures due to their high specific strength, high specific modulus, high damping and low thermal expansion, the hollow shafts made of carbon fiber epoxy composites have been widely used for power transmission shafts for motor vehicles , spindles of machine tools, motor base, bearing mount for tool up and manufacturing. The molded composite machine elements are not usually accurate enough for mechanical machine elements, which require turning drilling , cutting and grinding. The experiment are surface grinding wheel GC60 to the carbon fiber epoxy composite specimen with respect to staking angle [0]nT , [45]nT, [90]nT on the CNC grinding machine. In this paper, the surface grinding characteristics of composite plate, which are surveyed experimentally and analytically with respect to the grinding force, surface roughness and wheel loading according to the variable depth of cut, wheel velocity and table feed rate are investigated.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.2 no.2
• /
• pp.1-15
• /
• 1981

In reviewing of the literature concerning agronomic practices on intensive pasture establishment the following suggestions were made : (1) The seedbed preparation should be involved physical manipulation of the soil tilth and consolidation of the soil by harrows and heavy roller. (2) In terms of methods of sowing, drilling favours the first and broadcasting the second however, the apparent superiority of band sowing over the above conventional methods is to reduce the direct toxic chemical effects from fertilizers to germinating seeds. (3) The most satisfactory seeding depth for grasses and legumes is commonly agreed to be approximately 1.3cm and seeding depth greater than 2.5cm seems to be generally detrimental. (4) Autumn and spring are most common sowing periods for grasses and legumes, however, early autumn being the most generally favoured, particularly in areas not subject to severe winter kill. (5) Select nurse crop species or cultivars which make Bess demands on light, nutrients and water, and lower seed rates should be used. (6) Seeding mixtures should be simple rather than complex and aggressive species should be included to a minor extent.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.321-327
• /
• 1991

High power laser beams are used in a wide variety of materials processing applications such as cutting, welding, drilling and surface treatment. The CO$\sub$2/ laser is increasingly used in laser beam welding because of the highly potential advantages. High power laser welding is a high energy density, no filler metals and low heat input process to join metals. As the comparison with the conventiona welding, precision work and good fit-up to join the metals are required and maintenance is expensive at present. The principal variables of laser beam welding are the laser beam power, travel speed and bean spot size. The penetration depth during laser beam welding is directly related to the power density of the laser beam. Generally, for a constant beam size, the penetration depth increases with increasing laser beam power.

• Journal of the Korean Professional Engineers Association
• /
• v.17 no.3
• /
• pp.32-49
• /
• 1984

The East gate station area is 205M long and 24m deep which is located 13 meter in front of cultural treasure east gate. The area to be excavated by blasting is composed of granite rocks from 10M depth to 25M. Surface earth extends to up 10M depth. This job site has in involves heavy traffic congestion such as over 10,000 cars passing in rush hour where clossing No 1 lint of subway running 3 minitues head way. This east gate station construction is to be executed for the provent of the setting down of underground level and blasting vibration effects to cultural treasure east gate. Therefore, the caltural treasure committee approved this execution subject to the following condition. 1. Subway gelogical foundation and measured natural frequency 2. Execution of water tight wall 3. Sellection and test of damping material for wall and under rail 4. Measurement of monitoring system during the execution 5. Measurement of histogram system The above two projects was carried out by Dr. Kwang team in KAIST and prof, Han in Hanyang University under accadamic study contract. In the blasting work, for the pourpose of reduced vibration and low explosion velocity such as CCR, Kovex slurry. The 2nd, used electrical caps shall be delay cap and M/S caps in multi delay. The 3rd, drilling pattern is bench cut in open cut and applied control blasting in tunnelling and also shall drill anti-vibration holes as line drilling.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.102-110
• /
• 2019

The shipbuilding and offshore plant industry of Korea is important and leads Korea's economic growth, designated as the 1st to 4th export items in Korea in terms of export contribution over the period from 2011 to 2015. This study proposes ways to improve the national competitiveness of Korean shipyards in the global offshore drilling market by reviewing a business model for providing an integrated offshore drilling commissioning service in Korea. This commissioning service model, which was attempted in 2014, was reviewed, and a new proposed business model for overcoming the limitations of the previous model and activating further business was evaluated. As a result of an economic evaluation, it was found that a 150-meter water depth model is economically more effective. As the number of integrated commissions increased from 2 to 5 times per year, NPV, IRR and B/C ratios increased and the fee per use decreased. Therefore, for offshore drilling facilities constructed and delivered in Korea, it will be necessary to encourage integrated offshore commissioning.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2006.03a
• /
• pp.217-236
• /
• 2006

In this study, the LCM was applied as the preliminary study for the cutterhead design of TBM and the drilling performance evaluation. The optimum cutting condition is obtained from the LCM tests and the effects of the design factors of IBM cutterhead, such as penetration depth and cutter spacing, on drilling performance are estimated. In this study, hence, to predict the accurate performance of TBM, instead of one-dimensional penetration depth applied in existing studies, three-dimensional cutting volume was quantified and measured. For this, the digital photogrammetry technique was applied to the LCM tests. Also, AUTODYN 2D was applied to investigate the applicability of the numerical analysis technique to simulate the cutting process of rock by the TBM disc cutter.

• Geomechanics and Engineering
• /
• v.31 no.3
• /
• pp.249-263
• /
• 2022

The specially-shaped Polycrystalline Diamond Compact (PDC) cutter is widely used in drill bit design due to its advantages of high rock cutting efficiency, strong impact resistance and long service life in hard and abrasive formation drilling. A detailed understanding of rock cutting behavior of worn specially-shaped PDC cutter is essential to improve the drilling efficiency and decrease the drilling costs. In this paper, the theoretical models of two new principles (loading performance (LP) and cutting performance (CP)) are derived for evaluating the cutting process of worn specially-shaped cutter, the theoretical models consider the factors, such as cutter geometry, aggressiveness, stress state, working life, and rock cutting efficiency. Besides, the numerical model of heterogeneous granite is developed using finite element method combined with Voronoi tessellation, the LP and CP of 12 kinds of worn specially-shaped PDC (SPDC) cutters are analyzed. The results found that the mechanical specific energy (MSE) of worn cutters first increase and then decrease with increasing the cutting depth, and the MSE increase with the increase of back rake angle except for Conical cutter and Wedge-shaped cutter. From the perspective of CP, the worn PDC cutters are more suitable for the smaller cutting depths, and the back rake angle has little effect on the CP of the specially-shaped worn PDC cutters. Conical cutter, Saddle-shaped cutter and Ellipse-shaped cutter have the highest CP value, while Rhombus-shaped cutter, Convex cutter and Wedge-shaped cutter have the lowest value in selecting cutters. This research leads to an enhanced understanding of rock-breaking mechanisms of worn SPDC cutters, and provides the basis to select of specially-shaped PDC cutters for the specific target formation.

• Economic and Environmental Geology
• /
• v.5 no.3
• /
• pp.133-144
• /
• 1972

The mine of our present concern is situated at Shim-ri, Gusan-myon, Changwon-gun, Kyongsang-namdo, with lattitude $128^{\circ}35^{\prime}{\sim}36^{\prime}N$ and longitude $35^{\circ}03^{\prime}{\sim}04^{\prime}E$. This mine has not been noticed until the intermittent geological survey for the ore deposits were initiated from September, 1967 till 1970. The main mineralized zones, No.1 and No.2 zones, were studied by the diamond drilling of 9 holes down to the total depth of 1,140m, and found to have ore reserves of Cu 1.99% ore, estimated to reach around $358,000{\frac{M}{T}}$ (proved $117,000{\frac{M}{T}}$, indicated $241,000{\frac{M}{T}}$), which triggered the new exploitation of this mine. Geological composition of the district near the mine is mainly from the andesite belonging to the Silla Series of Kyongsang System and the distribution is broadly spread. Ore deposits are the hydrothermal one, filling the shear zone formed alongside the andesite main joint. There are two stripes of copper bearing mineralized zone which are about 40~70 meters apart and parallel to each other, in addition to which two others are expected. The strike of the main mineralized zone lies at $N15^{\circ}{\sim}20^{\circ}W$, the dip at $60^{\circ}{\sim}70^{\circ}NE$. The principal components of the ore mineral are chalcopyrite, bornite and as secondary, cuprite, tenorite, azurite and malachite. Pyrite, magnetite, specular hematite, very little of galena, sphalerite, quartz, epidote, zoisite, chlorite and calcite are found as gangue mineral. Confirmed by the drilling, the main mineralized zone, No.1 zone, has the length of 320m, average width of 1.62m, Ag 26g/t, Cu 1.84% and the average width of the ore zone except the narrow barren andesite horse interposed in the mineralized zone is 1.32m with Ag 32g/t and Cu 2.26%. The mineralized zone No.2 is 340m long, 1.00m wide with Ag 30g/t and Cu 2.15%. Neglecting the barren andesite horse the width is 0.73m with Ag 42g/t and Cu 2.94%.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.4
• /
• pp.33-39
• /
• 2003

The stiffness of multi-articulated industrial robots is very weak, because their structure is an articulated type with some links and joints. Thus it is known that cutting processes for metals are not accepted in machine shop well, but they have a lot of merits for cutting processes, for example, drilling, tapping, and engraving etc, because of the characteristics of their high degree of freedom. The temptation of cutting aluminium was carried out to investigate the feasibility and the limitations or constraints for cutting metals on them. First the mode shapes of 6 degree of freedom welding robot were taken and analysed, and next the cutting processes were practically carried out on it. The results of study were found out to show the feasibility of cutting processes at drilling under 6mm of tool diameter, as well as to have some limitations and constraints, for examples, feed rate, depth of cut and cutting force etc.

• Economic and Environmental Geology
• /
• v.20 no.4
• /
• pp.261-271
• /
• 1987

Muguk gold deposits are composed of quartz veins emplaced along faults in Mesozoic granodiorite. General strikes and dips of the veins are $N15{\sim}20^{\circ}W$ and $70{\sim}80^{\circ}NE$. Associated ore minerals are pyrite, arsenopyrite, sphalerite, galena, chalcopyrite, pyrrhotite, native silver, argentite, tetrahedrite and electrum. Vein mineral paragenesis is complicated by repeated fracturing, but five distinct depositional stages can be recognized. Electrum grains are associated mainly with sulfide bands formed along both margins of pale pink quartz of stage 3, and with patches of pyrite aggregate of stage 4. Before the close down in 1972, Muguk gold mine yielded more than 8 tons of gold of which major portion was produced from the No.2 vein. No.2 vein, extending about 1,500m laterally, was exploited to a depth of about 750m. In 1984, Young-poong mining company acquired the mining property and began geologic mapping, geochemical and geophysical exploration, diamond drilling and exploration tunnelling around the mine area to seek for other rich gold-bearing quartz veins. As the Samhyungje vein was disclosed to be the most rich vein, exploration works were focussed on the Samhyungje vein. As of August 1987, 22,338m of diamond drilling and 9,652m of exploration tunnelling have been undertaken. Owing to the successful result of exploration, the Muguk mine commenced normal operation on January 1987, treating 5,500 tons of ore per month.